blow moulding machines used for sale

The machine of the Italian company COMEC model CS 1500 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed ... more information

The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed ... more information

including 8 molds of Lt.1,5 and Lt 1, high pressure compressor 40 bar SIAD, ... more information

Single head Capacity : 5 Liter- 10 Liter Machine can be seen in working condition ... more information

Extrusion blow molding machine for polyethylene and/or polypropylene containers up to 1 liter capacity. Spindle diameter 48 L/D 24 A station. W. MÜLLER single outlet head with thickness regulator. Automatic deburring. Ordered delivery by extraction clamp on conveyor. Integrated pore checker. Incandescent cut.

WIB 65 JINGYE injection-blowing machine - Year 2013 launched 2014 It was used for the production of 11 liter containers from PC Suitable for HDPE. Screw diameter [mm] = 65 propeller speed [rpm] = 0 - 180 injection capacity [g] = 750 injection pressure [KN] = 1300 clamping force when blowing [KN] = 200 engine power [KW] = 37 heater power [KW] = 15 purge pressure [MPa] = 1.0 - 2.0 cooling water [bar] = 1 - 3 machine dimensions [mm] = 5200 x 1900 x 3600 machine weight [kg] = 8000 MAXIMUM PARTICULAR DIMENSIONS: Height [mm] = 300 Diameter [mm] = 300 connected machine ready to be presented during operation

Urola USP-2FL Blowmoulding machine 2004 Urola double mold bottle blower of 5 lt 3,300 bottles / hour, molds and tipper included, the machine is brand new ... more information

Blow molding machine SIAPI mod EA 6,000 PET bottles / h. Stamens for 0.5l, 1l, 1.5l and 2l formats. Overhauled and working ... more information

We sell a factory for the production of PET containers. Brand: TEREKAS (Litva) Model: TFA-3 Release year: 2006 Productivity: 3100 bph Power: 50 kW Rated Power: 30 kW Kit: blow molding machine TFA-3 Airpol compressor station high pressure compressor booster dehumidifier chiller 2nd high pressure tanks preform loading manipulator preform conveyor preform hopper preform loader molds (7 sets)

A machine for the production of PET bottles from 0.2L to 2L In good condition, the opportunity to see the bottle maker at work, Complete with mold ... more information

Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.

Blown extrusion machine for containers up to 0.5 liters. of capacity in polyethylene and/or polypropylene. Spindle diameter 45 L/D 24. A station. Single output head with MOOG thickness regulator with electric servo actuator. Automatic deburring. Delivery ordered by extraction clamp. Incandescent cut. In January 2020, the entire maneuver was migrated with the replacement of the PLC, Touch Screen (both Siemens), temperature regulators (Omron) and output relays. PLC Program and Display accessible.

The 2017 Mikformen TM800/3 is a versatile plastic thermoforming machine designed for sale. With a weight of 13,000 kg, this robust and precise machine offers a compact design, measuring 11.50 meters in length, 2.75 meters in width (including the electrical cabinet), and 2.85 meters in height. It is specifically designed for plastic thermoforming processes, with a maximum sheet width of 840 mm (with a 60 mm stretch) and the ability to handle sheet thicknesses ranging from 0.2 mm to 3.0 mm. The TM800/3 features a maximum product height of 130 mm in both positive and negative directions, and it achieves a cycle speed of 75 cycles per minute during dry-run operations. Equipped with powerful pressure forces of 60,000 daN for the forming station, 75,000 daN for the punching station, and 80,000 daN for the cutting station, this machine delivers precise and efficient results in plastic thermofor ...

Krupp Kautex Blowmoulding Machine Mono layer Double head One station Machine has been fully revised mechanically and also PLC revision in 2008 Machine is in working condition ... more information

PET preform blower up to 6 liters 1 cavity Maximum bottle diameter 170 mm Maximum bottle height 345 mm Production 800 BPH Installed power 33 Kw ... more information

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...

Preheater VN 1000, year 2008 Automatic continuously operating with the size of the foaming vessel 975x3000 mm, Stirrer drive power 15 kW Shift of the discharge bar in 3 positions from 1500 mm to 2700 mm on: - made of stainless steel - preliminary bunker for raw materials 250 l, - dosing screw adjustable - foaming vessel with heat insulation   layer to reduce condensation - heated bottom of the chamber with on / off. To shorten   condensation - mixer with stainless steel breakers,   chrome - removable, fixed breaker, - precise dosing of the chamber with an adjustable auger and   dosing funnel, - safety device when disconnected   electric current - detached electronic control unit, - bimetal thermometer inside the blowing agent. The performance of the blowing agent depends on the quality of the feedstock, with a European material standard: - at a density o ...

Description: engine power: 80 kW heating power: 49 kW max. hydraulic pressure: 250 bar max air pressure: 10 bar working pressure: 330 bar mould clamping: ,450 x 850mm  , general overhaul in 2008  , detailed dimensions in attached PDF document 2 trucks required for transport Approx. Onsite Dimension. (l x w x h): 5,500 x 1,700 x 3,400 mm, weight approx.: 19,900 kg

This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German). ... more information

This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN. ... more information