carton packaging machines used for sale

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition  ... more information

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition  ... more information

- according to layout - 1 part vintage 2006 - 1 part born in 1997 - All in very well maintained, good condition  ... more information

- Box : 3 x 4 / 3 x 5 / 4 x 6 - Boxes : many different sizes - With bottles of single-breasted MASPACK 110/14/RED for pressureless lining of bottles - Machine in perfect condition  ... more information

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition  ... more information

Used case packer / tray packer for open trays. Originally, 1 litre tetra packs were cartoned. Manufacturer: M.A.S. Automation AS Year of construction: 06/2006 Cardboard is pre-folded from flat blanks, filled and then folded around the product. Gluing by means of hot melt glue. Infinitely variable adjustment units Product infeed conveyor incomplete. max. 100 products/min Control cabinet: Rittal, V2A Pneumat. Festo Gluer Nordson Geared motors SEW Frame stainless steel Mech .+ electr. Standard parts: Branded 2 emergency stop switches, safety light barriers The facility can be visited in Bremen.

Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.

Used TecnoBox carton machine model TX-1. New 2009. Tecnobox machines offer solutions for assembling and gluing corrugated cardboard boxes, handling most formats available on the market (including P84, Column, Plaform, C1). The TX series, thanks to its design and composition, is undoubtedly one of the strongest and most robust machines on the market. With no major maintenance work required thanks to standardised and wear-resistant components, specially positioned for easy access, it is possible to replace them even without much mechanical knowledge. All these components are ISO-certified and can be easily found in the widest variety of parts shops. Designed to meet the requirements of mobility, thanks to its robustness and transport attachment elements, it makes installing the machine at a specific location simple and easy.

Used cartoner Höfliger + Karg (Bosch) CARTONETTA. New 1975. Dimensions: lenght 2850 mm + ca. 3000 mm conveyor width 1100 mm height 1600 mm weight 450 kg. Voltage: 380V with a power socket Machine speed: up to 50 cartons per minute Folding the leaflet: 3 or 4 fold the sheet. Dimensions for folding leaflets: 3 - fold: from 90 x 90mm to 210 x 210mm 4 - fold: from 90 x 90mm to 297 x 210mm Carton length: 50 - 180mm Carton width: 15 - 80mm Carton height: 16 - 60mm

Used KAR 1 cardboard box closing machine. The device is used to automatically insert the tube into the cardboard box. The cartons are previously unfolded and pressed into special slots on the chain conveyor. The box passes through the individual slots, activating subsequent actuators closing the box. At the end of the transporter there is a receiver that takes out the cardboard boxes. Packaging of 3 pieces takes place on the conveyor belt, and then it is turned by 90 degrees and taken out of the machine.

Harro Höfliger Cartonetta horizontal end-load cartoner, with hand fed bucket infeed, including flat sheet leaflet folder, glue closure with Nordson ProBlue 4 hot melt unit, carton size range min. 15 x 15 x 54 mm, max. 92 x 66 x 180 mm, output up to 75 cartons per minute (2000 overhauled by Harro Höfliger)

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

Cartoning machine, new for immediate delivery, Format range: A 20 - 115 mm W 15 - 75 mm C 35 - 200 mm  ... more information

Uhlmann C 130 horizontal cartoning machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement warranty Mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflet and Carton Code - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion -Vacuum pump

Fully automatic forming and erecting of NeoTOP partitioned carton fluted trays, NeoTOP open- top trays or NeoTOP cartons including integrated partition from flat blanks; cylindrical objects, applicators, tubes, medical devices or blisters are then laid in. The partitioned cartons, trays and packs are formed fully automatically from two supplied flat blanks. The partitions are formed and glued into the erected pack or onto the carrier blank. The products are then laid in by an automatic integrated inserter. An automatic product presence checker and leaflet inserter, barcode reading systems and a hot-melt unit for tamper-evident packaging complete the machine system. Output: up to 90 cartons / min. Inkl. sep. electr. panel.

Machine Length: 3150mm Machine Width: 1700mm Machine Height: 1200mm Machine Weight: Approx 0.5t MATERIALS All grades of Singlewall Corrugated up to 300 300 B/C Double Wall KEY BENEFITS Handles short runs economically Set up in 15 seconds 600 boxes per hour British designed and built

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available

Jacob White TFS Two flap sealer Serial: M3178 2020, Stainless two flap sealer, variable speed, min box width 100mm to max box width 260mm, hot glue pots, mobile, 1Ph  ... more information

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format  ... more information

Complete winder like new  ... more information