pillow packs machines used for sale

Packaging machine BVM Compacta 5022 EGS; good condition; cleaned and tested; Max. Product width 450mm; Passage height 220mm; Max. Foil width 650mm; new belts installed; Side welding overhauled; Conveyor belt 3000mm; Double-chamber shrink tunnel SC 4530 SD; Roller run-out 3000mm. Side sealing machine BVM Compacta 5022 EGS; good condition; cleaned and checked; max.product width 450mm; max. product hight 220mm; max.foil width 650mm; new belts; side sealing unit rebuilt; infeed conveyor 3000mm; Roller outfeed conveyor 3000mm.

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...

Ulma Atlanta, High speed flow packing line possible with shrink film and shrink tunnel., Bottom Seal ... more information

Packaging machine BVM Compacta 5022 EMS Servo; good condition; cleaned and tested; Welding width 500mm; Passage height 220mm; with 2.Sonber welding stamp for plastic bag handle; optionally with shrink tunnel SC 4030 SD. Side sealing machine BVM Compacta 5022 EMS Servo; good condition; cleaned and checked; sealing width 500mm; hight 220mm; with secound stamp for plastic bag handle; for option with shrink tunnel SC 4030 SD.

Welding Width: 1300 mm // Bag Length (Max): 1500 mm ... more information

Angle foil shrink-wrapping machine Masch. Item no.: K1276.672 Format max: 500x500x300 mm Shrink tunnel Passage height: 400 mm  ... more information

Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW

Ilapak Vegatronic 2000 OF (open frame), Perfect machine for a wide variety of products. This machine has a 450mm sealing system that makes it very capable or processing large pouches for bulk products. A very strong and durable build machine for either small and light bags but also capable of heavy portion weights., - Heat seal, - 450mm wide sealing system, - Open frame, making it easy to wash down the machine., More information soon

Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph  ... more information

Pentavac Penta2100 VFFS bagger 2007, vertical form fill and seal machine, 300mm jaw width, adjustable temperature controls, with printer, touch screen controls, with outfeed conveyor, belt width 280mm, belt height 950mm, with four different forming sets, with manual and box of spares, 3Ph  ... more information

Type HFFS Output: up to 100 packs per minute Bag length variable: min. 125 mm to max. 625 mm Product length: min. 90 mm to max. 500 mm Product width: min. 10 mm to max. 150 mm Product height: min. 5 mm to max. 150 mm equipped with print mark control  ... more information

horizontal bag machine Gekupack GK Industries Mini 260 New machine Packaging machine for pre-made bags: doypacks, block bottoms, flat bags, ... Suitable for confectionery, animal feed, powders, legumes, small iron parts, nuts, snacks, ... NEW MACHINE! Built in 2022 on behalf of the customer, but never delivered due to difficulties on the customer side. The machine is immediately available! Workspace: 130 mm - 310 mm bag width 130 mm - 350 mm bag length Achievement: approx. 15 - 20 packs per minute (depending on product and film material) Omron PLC - Panel, Relay, Temperature Controller HMI Panel 10" color display (touchscreen) Schmalz Vacuum Generator Panasonic Servo Drives Stainless steel Protection class IP 54 Power supply 220/230 V, 50/60 Hz Power approx. 2.2 kW Compressed air consumption 520l/min, 6-7 bar Supported bag materials: PE, PP, LDPE, PLA, k ...

Flowpack machine Flow-wrapping machine Manufacturer: Type: DIBIFLOW 500 Year of construction: 2022 Horizontal rotating packaging machine with spool from above Cantilevered structure in aluminum and painted steel (RAL 7035 GREY – RAL 5002 BLUE) and stainless steel housing AISI 304 stainless steel parts that come into contact with the product Adjustable support legs Side-adjustable guides Studded loading belt, length 1600 mm (standard) Pressure lugs with fast extraction in plastic material suitable for contact with food Longitudinal welding machine with two pairs of wheels Diameter 120 mm the first cold to pull the second hot for welding Single-sector turnstile welding machine with a width of 240mm Independent temperature adjustment (cross welder and longitudinal welding wheels) Electronic safety coupling on the transverse welders Tunnel / film conformer with ...

Wolf vertical bagging machine, With 2021 Herma labeler and a markem Printer ... more information

Packaging machine Hugo Beck Flexo 500 S; Condition as is; tested for function only; Product width 25-450mm; Product height 2-200mm; Product length 80-unlimited; Output max.60 cycles/min.; .max. Foil width 550mm; Conveyor belt 1000mm. Side sealing machine Hugo Beck Flexo 500 S; condition as is; only checked on function; product width 25-450mm; product hight 2-200mm; product length 80-unlimeted; speed up to 60 pics./min.; max foil width 550mm; Infeed conveyor 1000mm.

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors  ... more information

BVM Compacta 5015 incl. tunnel Built in 2000 In stock and ready for immediate use  ... more information

Mimi Tight Banding Banding Bundle Packer Packaging Machine is in stock and ready for immediate use  ... more information

DESCRIPTION Beck Packers Series Packer S1750 X Fully automatic film packaging machine for four-sided product shrink-wrapping Fully automatic, belt feeding with light barrier control Functioning: The beck series packer works fully automatically with photoelectric product scanning. The goods to be packed are introduced by means of a conveyor belt into the cross weld seam and Shrink-wrapped there in cycles on 4 sides. The film rolls are mounted above and below the conveyor belt. For the production of skin-tight shrink packs, the packaging machine can be equipped with the proven energy saving beck thermal shrink can be extended to a complete film packaging line. Specifications: Standard operating page: right Welding punch width: 550 mm Punch closure: servo-motor Welding system: permanently heated Passage height: 100 mm Belt width inlet: 140mm Belt width spout: 1 ...