subcategories
(3rd category level)
Manufacturer:
(Category: 409)
Hot needle micro perforation machine, make LaserPin (IT), year 2020, - Usable width for micro-perforation = 1400 mm, - Maximum speed = 250 meters/minute, - Diameter of holes = 0.3mm to 2.8mm, - Maximum temperature = 400°C, - Heating power = 37 KW, - Touchscreen control panel, The machine was bought in mid-2020 and only used for less than 100 hours, HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles., The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps., This technology creates homogeneous holes and was developed in the 80s., An industrial standard control cabinet system with WiFi modem (purchased separately and, configured) for wireless connection to any existing inline production system., User-friendly and multilingual control panel with addition ...
We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.
FFP2 Mask Machine Mask Production Line Manufacturer: Ruhlamat Type: MPL FFP2/016 Year of construction: 2020 Mask Production Line N95/FFP2 Maske Dimensions LxWxH installation: 8921 x 1494 x 1985 mm Free space around the system: 1500 mm circumferential 50 Hz / 2.6 kVa Pressure: 6 bar Weight approx.: 2500 kg FFP2 masks consist of 3-6 layers of fleece. This machine can produce masks with up to 6 layers. The machine consists of five stations Station 1 = Reel Station 2 = punching, noseband and welding, embossing roller Station 3.1 = Printing and Welding Earband Station 3.2 = Alignment of folding edge Sation 4: = Welding Contour and Cutting Mask
The system includes five palletising stations and four pick up stations. ... more information
Two identical big bag discharge stations with Vegawave S61 limit switch are available. Max. discharge weight: 1000kg, weight: 99kg. Limit switch: process temperature: -50°C-150°C, max. process pressure: 16bar, length: 165mm. The discharge stations are only sold as a package deal. The machines cannot be sold separately.
Running direction: left to right, working width: 130mm, max. packaged goods height: 90mm, packaged goods length: 150mm, working height: 880+/-50mm, compressed air connection: 7bar, length: 2250mm, width: 1660mm, height: 1750mm, including documentation, packaging material, mobile conveyor belt to bridge the stamp gap, spare parts package consisting of sealing blade, cutting blade, thermal sensor and toothed belt, 4 pallets, approx. 100 rolls of biaxially shrinking, smoothly perforated PE semi-tubular film, 300mm wide and 30μm thick with 1000lfm per roll, with lateral film holder for semi-tubular film, on-site inspection is possible.
Semi-automatic induction sealer for aluminium foils in closures - Closure sizes 15-60mm - Closure sizes 50-120mm ... more information
Packaging machine Flowpack machine Manufacturer: Hugo Beck Type: flowpack R10 Year of construction: 2021 Rotating transverse weld Moulded shoulders that vary in width for a bag width of approx. 10 cm to 13 cm Constant height of the molded shoulders for a bag height of approx. 5-10 mm (depending on the shape of the contents) Film width: 300 mm / max. 400 mm Output: up to 18,000 cycles/h Sensor for pressure marker detection 170 mm wide welding jaws with zigzag section, without Euro hole Inlet table length approx. 1.5m Longitudinal weld seam at the bottom
Robopac Masterplat Plus PGS pallet wrapper 2021, turntable style pallet wrapper, turntable diameter 1630mm, wraps up to 1900mm, adjustable speed, 1Ph ... more information
Max. pallet weight: 1200kg, table diameter: 1500mm, load capacity: 1200kg, wrapping height: adjustable, turntable rotation speed: 12rpm, film trolley speed: 5m/min, dimensions X/Y/Z: 2500mm/1500mm/700mm. ... more information
Max. pallet weight: 1.2t, length: 2500mm, width: 1500mm, height: 700mm. ... more information
Sell a semiautomatic 4 - roll screw this. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack
Semi-automatic angle welding machine type FP870A Specifications: Welding frame size: 870 x 620 mm passage height: 300 mm film width: 800 mm film roll diameter: 300 mm Automatic welding frame closure Suitable for polyolefins and LDPE films Power up to 900 cycles/hour; depending on machine equipment, product and film. With foot pedal Power supply: 230 V heating capacity: 3.1 kW The machine is still in the original box from the manufacturer. Delivery ex works without installation and commissioning, but can be organized for an extra charge.
Band conveyor 14 cm wide - 2.00 m long use as a stack table behind filling arrangements possibly nevertheless, height of the stack level (normally 0.75m) is changeable on 0.95 m. the band conveyor can be put about a Poti in the speed. ... more information
Item condition: mint condition, unused Available: Immediately To better understand how the machine works, we recommend watching the video below incl. rotary table ø1200 for container feeding incl. conveyor belt for container feeding incl. filling machine with multi-axis servo system incl. servo-motorized countersunk nozzle incl. rotary valve assembly for filling volume 2-20 ml incl. special rotary valve with adapted gap dimension incl. filler assembly for filling 2-20 ml incl. gasket carrier (PEEK) incl. closing valve with blow-off device incl. dosing cylinder / dosing flask ø25 (2-50ml) incl. filling set with filling tube M18x1.5, nozzle insert ø5 incl. funnel 15 litres, single-walled incl. funnel cover made of stainless steel AISI 316 L incl. visual fill level indicator for product hoppers incl. fill level control in the container incl. sealing foil applicati ...
Packing table with conveyor belt! Aluminium frame work surface made of stainless steel Overall length 2, 20m Working height 0, 90 m Conveyor speed can be adjusted You will find more machines and accessories below: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &
Semi-automatic screw to the seal of screw-type caps.Tick count of 0-15 PCs / ProduktabhängigAuslösung of the photo-electric cell screwing process. ... more information
EDDA packing machine, packing machine, pallet cutting machine, automatic wrapping machine ROBOWRAP EDDA wrappers are recognized as the best solution in the field of packaging. Modern Edda wrappers, based on the latest technologies, thanks to their strong mechanical design and the required systems ensuring operator safety, meet the EU requirements and are CE certified. Standard control system components come from top brands such as Siemens, Schneider and LG Industrial. The machines are designed for a long service life and do not contain any parts from the Far East. Edda wrappers are designed for packing products in PE bubble wrap, PE foam film and shrink wrap. The ROBOWRAP wrapper is ideal for packing: Pallets Large packages, cartons Door Specifications: Machine dimensions L x W x H: 1100 x 600 x 2200 Weight: 490 kg Battery Voltage: 24V DC Power supply: 220 V ...