granulation plants used for sale

Compact but powerful machine for processing old cables up to approx. 25 mm in diameter. The nominal output of the system is 120 kg/hour when using a 4.0 mm perforated screen. By using a pre-shredder, the performance can be significantly increased, then stronger cables are also possible. The machine has been checked and modified in our workshop. - new dividing table - new set of knives - new sieves - new seals - Connection for refrigeration unit - Connection for feed and conveyor belt On request, we can supply additional accessories for the machine, such as: - Pre-shredder -Magnetic drum - Dosing accumulator - Refrigeration unit - Dust filter - Screening drum - Bigbag stand with air conveyance for plastic granules

Used cable recycling plant Tecnoecology T 250 Turbo Year of construction: 2008 The plant consists of the following parts: - Pre-shredder: Bano MAC 630, approx. 250 - 400 kg/hour, depending on material - Conveyor belt to the dosing accumulator, approx. 4.0 m - Dosing accumulator with discharge conveyor, approx. 1.5 m³ - Controlled conveyor belt with belt magnet for feeding the granulator, approx. 4.0 m - Granulator GA 400/30, approx. 250 - 400 kg/hour, depending on material - Turbine mill, T 25-2, built in 2019 - Separator TV 300, inverter controlled, separation table 80 μm - Dust extraction and filter system The entire system currently achieves between 200 and 300 kg/hour in operation, depending on the cable composition. On request, additional components, such as a big bag loading for the plastic or the re-screening of the granules, can be supplied. The plant is curre ...

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Cable recycling plant with many innovations in all plant components for up to 600 kg/hour (depending on material) The basis of this recycling plant is modularly constructed from strong and innovative individual components. In the standard version, the following structure is obtained. - Preshredder MR 4080 or MR 40-100 - Conveyor belt with magnetic separator - controlled by PLC - Granulator C 600 with axle length 600 mm, 5 rotor blades and 37 kW drive, cooling of the housing by unit against adhesions - Z-separator for the separation of heavy copper or 1 granulate - Dosing drum for the optimally uniform feeding of the following turbine mill - Ghibli 545 turbine mill (new model), optionally with coolable housing and inverter control - SA 600 separation table, new version with PLC inverter control of the air volume + eccentric drive with inverter control of the oscillation + adju ...

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Diebel RMH 18/45 pelletizing system for cables, plastic Manafacture: Diebels Type: RMH 18/45 Year of construction: 2011 Drive: 7.5 kW Filling opening: 460 x 225 mm Rotor diameter: 180 mm Sieve hole: 4 mm Replacement screens: 2 pieces, 2 / 3 mm Throughput (plastic): 60-80 kg/h Weight: 320 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.  ... more information

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

recoem GDS-150 Year of construction : 2023 Condition : New Total power : 11 kW Throughput : approx. 150 kg/h Accessories : 2,3,4 hole sieve Dimensions : LxWxH 1615x1315x2110 mm Total weight : 1300 kg A compact recycling plant with 3 rotating 2 fixed knives. The design and precision of the cutter chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, just get in touch.

recoem GDS-460 Challanger with air filter tower and turbo mill Year of construction : 2021 Condition : New Power : 22,5 kW motor Total power : approx. 48kW Throughput : 400kg/h Accessories : 2,3,4,5,6 hole sieve Dimensions : LxWxH 3000x1500x2200 mm Total weight : 3600 kg Rotor dimensions : L x diameter. 460x400 mm A compact recycling plant Model Challenger GDS 460. Single shaft cable breaker with 15 rotating 2 fixed knives. The design and precision of the cutting chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, simply contact us.

MEWA UG 1007 MS Power 160 kW Condition: used in need of repair Rotor blades: 25 pieces Stator knives: 10 pieces incl. hopper with pusher Switchboard Discharge chute Hydraulic Screen lifter Very few hours of operation. The machine has been unused for several years. Total weight approx. 15 t Delivery time : immediately

RAPID 300 MILL granulator exhaust fan and cyclone Manufacturer: RAPID Condition: good condition, ready for operation Electrical engine installed power: 11 kW Nr. of shaft: 1 Shaft length: 300 mm Blades: 4 rotating cutting blades/ 1 stationary blade Working space: 300 x 300 mm Sieve: yes Control panel: yes Exhaust fan: yes Cyclone: yes Input hopper: yes Weight: apx. 450 kg Uploading on the truck is free of charge. Can be inspected in our warehouse in Székesfehérvár 8000, Hungary. For further information please contact us.

KG 50 Year of construction 2023 Condition new Description cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 3 - 30mm Weight 515KG Can be inspected in Hungary 8000. Available immediately from stock.  ... more information

STOKKERMILL K750 cable granulator-separator machine FROM STOCK! Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetri ...

Tria granulator 80-40 TE-SL refurbished 2022 Construction: Base frame as steel/weld structure in reinforced design Rotor: Ø 350 mm, 6 knives Fixed knives: 10 knives Drive motor: approx. 50 kW  ... more information

Herbold Granulator overhauled 2022 Construction Base frame as steel/weld structure in reinforced design Rotor: Ø approx. 400 mm 6 knives Fixed knives: 10 knives Drive motor: 30 kW  ... more information

The cable pelletizer system comes from the Turkish machine manufacturer GEM and has a processing capacity of up to 1,000 kg of old cable / hour. The machine has the following components: 1.Conveyor belt to shredder: 2.2 KWA motor power / 5.5m long 2. Shredder: CE certificate: TS 1000 / pressure 100 bar / 75 kWA /145HP engine power / capacity: 800 – 1200 KG / hour 3. Conveyor belt from the shredder: 2.2 kWA motor power / length 6 m 4. Spiral bunker and spiral conveyor: 3.0 kWA motor power / length 3.5 m 5. Hopper to granulator: 3.0 kWA motor power / length 5.2 m 6. Granulator: CE certificate: TR 1000 - 5 / 110 kWA motor power / capacity: 800 – 1200 KG / hour 7. Screw fan: 11 kWA motor power / number of revolutions: 3000/minute 8. Helix Silo: 1.5 kWA motor power 9. Separator plastic of copper: 0.55 x 2 kWA motor power 10. Magnet separator: 0.55 kWA motor power 11. Filter ...

Cutter Compactor Plastic Recycling Pelletizing System The ACS-H TM series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to One step. Applied in the plastics recyclng and pelletizing process. ACS-H TM system is a reliable and efficiency solution for plastics film, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.Lower investment for a high performance machine. It can provide higher output but with lower energy consumption. Application: PE,PP,PS,ABS,XPS,EPS,PVB.

Project: PE film pelletizing line Raw material & formula -HDPE video Final product--HDPE granules, 3-5mm Output capacity--450~550kg/h, depends on condition of client's material. Coplete ofert is under the link: file:///C:/Users/Marcin/Desktop/krowy/Ofert%20granulacji%20ACS120..htm  ... more information

Used hard PVC granulation plant after reconditioning Capacity approx. 200 - 300 kg/h, consisting of: 1.Extruder Krauss Maffei KMD 2-60KK (twin-screw, oblique screws), Year Built 1996 Main engine 37kw Heaters controlled by thermoregulators Heaters of German production Degassing – pump Screw diameter: 60-125 mm Screw speed 37.5 rpm Oil-thermostated augers externally Heating power of snails 6kw Screw cooling power 7kw Oil-cooled cylinder 4 zones on the cylinder (including 3 heating and cooling zones) Gefran/ Gneuse mass pressure sensor – Gefran/Gneuse ground temperature sensor Cylinder cooling power 14kw Capacity up to 300 kg/h 2. rotary filter (sieve changer) Manufacturer: Gneuss Type SF-90 – capacity up to 350 kg/h 3.Cutting in hot air system 4. granulate cooler with conveyor fan