Manufacturer:
(Category: 502)
Technical data packing press / can press / metal sheet press:Manufacturer unoTech GmbHType UPAXX 70Year of manufacture 2019Operating hours approx. 3,000 hoursPressing force 700 kN at 315 barFilling opening chute 420 x 1,250 mm (d x w)Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on materialDrive power 30 kWConnected load 40 kWPower consumption, total 70 AThroughput capacity for empty beverage cans with:one pressing stroke approx. 1.7 t/hourtwo pressing strokes approx. 2.5 t/hourAchieved compaction approx. 1200 kg/m³Hydraulic oil tank capacity 850 lPress dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h)Transport weight press approx. 9.5 tAccessories:Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355Material properties:According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet off ...
For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h)Machine weight baler approx. 40 tonsSc ...
Technical data baler:Manufacturer PresonaType LP 40 EH1 PETYear of construction 1998Operating hours 37,884 hours, data according to operating hours counter, as of MarchNo. of bales pressed 311,714 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 15 kWConnected load, total 18 kWAbsicherung min. 50 A, max. 63 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions ex ...
Technical data baler:Manufacturer BOAType 2040.S.5V.71.37Year of manufacture 2003Operating hours approx. 35,598 hours, as of MarchPressing force main press 71 tSpecific pressing pressure 9.1 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 37 kWTying system 5-fold vertical, fully automaticThroughput rates for quality:B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on materialHydraulic oil tank capacity 800 lTransport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h)Machine weight press approx. 24 tNoise level
Technical data baler:Manufacturer PresonaType LP 40 EH1 Year of construction 1995Operating hours 16,917 hours, data according to operating hours counter, as of MarchNo. of bales pressed 28,745 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 18,5 kWConnected load, total 26 kWAbsicherung min. 62 A, max. 100 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions exc ...
Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK)Year of manufacture 2007Operating hours 11,970 hours, as of MarchPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control Siemens S7-200 Effective transport ...
A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute.Technical data baler:Manufacturer BOAType Impress D130.110.B.5-(5R).1.6Year of construction 2009Press power main press 127 tonsSpecific press capacity 10,7 kg/cm²Working pressure 280 barFeed channel 1.620 x 972 mm (l x w)Press volume / cycle 4,1 cbmVolume throughput without load up to 865 cbm/hourCycle time under operating conditions 22 sec.Press stroke 2.900 mmBale size 1.100 x 1.100 mm (w x h) length adjustableDriving power 2 x 55 kWConnected load 132 kWTying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm up to 17 to/hbulk weight of 50 kg/cbm up to 29 to/hbulk weight of 100 kg/cbm up to 37 to/hbulk weight of 150 kg/cbm up to 51 to/hBale weight up to 1.200 kgVolume hydraulic oil tank 1,850 LSPS contro ...