Manufacturer:
(Category: 1601)
Inv. Num. : 6939 Type: S132 Producer: Ingersoll Rand Created: 2017 Parameters: Capacity:: 31500 l/min Operating pressure: 8.5 bar Speed: 2995 1/min Machine weight: 3400 kg Equipment: Compressed air dryer Ventilation ... more information
Inv. Num. : 6428 Type: ST 45 Produzent: ATMOS Erzeugt: 2021 Parametern: Einschaltstunden: 461 h Betriebsstunden: 78 h Drehzahl: 3600 1/min Motor: 45 kW Ausstattung: Der Luftschacht Entwässerungsfilter ... more information
Inv. Num. : 6505 Type: UNIGY 11kW-8 Producer: Ingersoll-Rand Created: 2004 Parameters: Total power: 11 kW Max pressure: 22 bar Maximum temperature: 60 C Machine weight: 46 kg Equipment: Compressed air dryers ... more information
Compressor system consisting of two compressors Elektra + Boge which are connected together: 1. Boge Type S R 1830-45 No. 273287 from 1982 Maximum operating pressure 10 bar Displacement 1830l/min Speed 950 rpm. 2. Elektra compressor with accumulator Type LP1000/11/500 Factory No. 3114 Year of manufacture 1974, operating pressure 11 bar, Boiler capacity 500ltr., suction capacity 1000ltr./min. Flow rate 710ltr./min. Compressor speed 1360 rpm. Power requirement 10 hp Attention: two pressure gauges on the container are damaged/transport damage The plant is in a technically good condition and was dismantled and dismantled and removed during a company relocation and is no longer needed. This system was used for the use of several air nailers for pallet production. Transportation is done by buyer. Sale only without guarantee and warranty Changes and errors in technical ...
REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2†- Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.
Rotary lobe blower in good condition. 2.2 kW, 1940 rpm, 1 m3/min, 500 mbar ... more information
Screw compressor Manufacturer Rota Rotorkomp Compressor Drive power 11KW Operating pressure 11 bar Operating pressure maximum 15 bar Operating hours according to the meter 2,035 hrs. Without compressed air boiler Device ready to be demonstrated under power ... more information
We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...
COMPRESSOR BRAND: ATLAS COPCO TYPE: GA 808 PACK PRESSURE: 8 BAR ENGINE 75 KW, BRAND: SIMENS. ... more information
SOLLANT SLT 15 rotary screw compressor built in China in 2021 is a versatile device designed to deliver the highest quality compressed air. The compressor’s special modular design features a small number of parts and connectors, ensuring efficient and uninterrupted operation even during the most demanding industrial applications. The SOLLANT SLT 15 rotary screw compressor also features an integrated SOLLANT LGA-2.6 refrigeration dryer, which continuously removes moisture and water vapour from the compressed air, minimising the risk of corrosion. All key operating parameters are continuously monitored by a MAM-880 controller with electronic display and sensors. The total weight of the machine is 550 kg. Technical specifications of the SOLLANT SLT 15 compressor - power: 15 kW - maximum operating pressure: 1 MPa (10 bar) - capacity: 2.1 m3/min - drive type: direct drive - refri ...
WORTHINGTON CREYSSENSAC RLR 20 CE rotary screw compressor was built in Italy in 2022. The easy-to-maintain compressor with innovative technology provides users with high-quality compressed air at low operating costs. The motor, inverter and other machine components are cooled by a separate airflow with a low operating temperature, and the use of direct-drive gearbox ensures high energy efficiency and operational reliability. The ROLLAIR 20 screw compressor has a capacity of 137 m3/h at a maximum operating pressure of 10 bar. The compressor’s internal water separator with automatic drain and DS13 refrigeration dryer immediately remove moisture from the compressed air, guaranteeing long and trouble-free machine operation. A state-of-the-art Airlogic² controller enables operation with different pressure ranges and allows continuous monitoring of key operating parameters. The total wei ...
AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200 ...
COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...
Compressor AIRPOL 15 manufactured in 2008. Technical data : - capacity: 120 m3 - overpressure: 10 bar - engine speed: 3000 / min - engine power: 15 kW - dimensions (length x width x height): 1100 x 650 x 1180 mm - weight: 340 kg ... more information
The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700 ...
Alup Screw Compressor 10 bar 7000 l/min 45 kW Weight approx. 1000 kg VAT not deductible ... more information
Air compressor, make CompAir, type: D75HSR-10W, 75 kW, built-in compressors 2S4 and 2S7, volume flow 11.9 m³/min, 10 bar, intake pressure 1 bar, 3700 rpm, YOC 2009 ... more information
Specifications: - Control SIGMA CONTROL - Operating hours approx. 30909 h - Load hours approx. 20045 h - Operating pressure 11 bar - Delivery rate 1.26 m³/min - Engine speed 2955 1/min - Drive 400 V / 9 kW - Refrigerant dryer KAESER type TBH 14 year 18 - Air tank make OKS , 500 L year 17 - Oil – water separator - Total space requirement approx. W 2200 x H 2000 x D 1000 mm - Weight approx. 500 kg
COMPRESSORS SAMSUNG YOM: 2014 Models: SM5000-1000; SM5000 Equipment Summary: Turbo Compressor - 5 units: SN1:CE0518M102 Yr.2014; SN2:3210344-30 Yr.2008; SN3:3210344-40 Yr.2008; SN4:3210344-20 Yr.2008; SN5:3210344-10 Yr.2008 Air Dryer - 8 x 3.6cu.m drying towers - 4 units C/Water Pump - 55kW/75Hp - 7 units Receiver Tank - 20.3cu.m - 2 units Cooling Tower - 1,560,000Kcal/hr - 1 unit Cooling Tower - 250RT - 1 unit Cooling Tower - 400RT - 3 units Control Panels Accessories/other items: Spare parts: Dryer Heater Flange, pump motor spring mounts etc. Filters Connecting pipes Weight: 45.800,00 Capacity: 7200Ncu.m/hr; 1250hp x 1 unit; 1100hp x 5 units Make SAMSUNG Serial SN1:CE0518M102 / SN2:3210344-30 / SN4:3210344-20 / SN5:3210344-10 SN3:3210344-40 Model SM5000-1000; SM5000 Year 2014 Capacity 7200Ncu.m/hr; 1250hp x 1 unit; 1100hp x 4 unit ...
Compressor, 8 bar, Worthington - Creyssensac - used - : Price: 3.500.-€ (net), dismantled and loaded Manufacturer: Worthington - Creyssensac Type: RL R 5000 AX2 Year of construction: unknown - could be 2000 Operating hours: unknown - still to be clarified Bar max: 8 m3/h: 395 KW: 37 V/ Ph/Hz: 400/3.0/50 64 Ampere min-1: 3,000 kg: 790 Condition: good