post press: folders used for sale

PA 21/3 High-performance brochure inserts for pre-folded brochures/package inserts Technical features: -Drive on the right -Solid construction -Low-noise drive - without gears -Modular system - Highest performance through the use of double curve, crank drive and electronically controlled stepper -Compulsory handover Sizes: -Inlet width max. 210 mm min. 60 mm -Inlet length max. 105 mm min. 15 mm Paper weight: -Recommended paper thickness 45 - 100 g/sqm Achievement: -Depending on paper quality and fold up to 400 rpm. Drive: -via chain Mass and weight at PA21/3: 1600 x 640 x 500 mm (length x width x height) Weight: 84 kg Compressed air connection for solenoid valve vacuum control 6 bar, vacuum connection: 0.6 bar, compressed air connection (Festo valve) for pneumat. Swivel actuator 6 bar The PA 21/3 are similar in principle to the PA 21/2, but h ...

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

-Year 2000 -Max paper size 66x106 cms. -Anti noise hoods -Six electronic motorized buckles + 2 electronic knives -High pile feeder, Vaculift, Vacubelt, DV Pump -MBO MPC Control , Panel with all remote controls of the sizes and knives -Z 6 MBO mobile knife -HHS C 1100 glue system with 12 sections to connect -One spray glue gun, perforators and tools -Petratto DP 46 press station and stacker -All rollers in perfect conditions -Lot of parts and accessories

Folding machine H+H KL 112-45-T10; built in 2002; good condition; cleaned and tested; Inlet width 450mm; 10 folding pockets; Investor Gremser FN-K-TH; Area dial counter HHC-100; Transfer No.220.1-45 built in 2016; 2.Falzwerk KL112.1-mobil-45 Bj.2016; 6 folding pockets; Standing sheet display No.177-mobil 45 built in 2013; Display No.701-1500-52 built in 2016. Folding machine H+H KL 112-45-T10; good condition; cleaned and checked; working width 450mm; ten pockets; feeder Gremser FN-K-TH; count unit HHC-100; hang up conveyor No.220.1-45 year 2016; secound unit KL112.1-mobil 45 year 2016; six pockets; smal format delivery No.177-mobil45 year 2013; stream delivery No.701-1500-52 year 2016.

4 buckles  ... more information

several folded pockets of a Stahlfolder 78 manually or motorized adjustable  ... more information

Standing sheet delivery M.Bäuerle SKM 36 A; cleaned and tested; new tapes; new drive belt; Max. Inlet width 360mm, min.50mm; height adjustable; Kicker. Small format vertical stacker M.Bäuerle SKM 36; cleaned and checked; new belts; new timing belt; max.infeed width 360mm, min.50mm; adjustable in hight; kicker.

DIRECTLY FROM THE PRINT SHOP Offer consists of: Horizon AFC-746 F 6-pocket folding machine - Parallel fracture rolling condition: % - Cross-fracture rollers I condition: % - Cross-fracture rollers II condition: % - Rollers overhauled parallel fraction: 2.926€ - Cross-broken rollers on request - Folding machine AFC-746 F - Pallet feeder - Shed display Horizon folding machine AFC-746 F: 1. Folder: 6 pockets 2. Folder: Sword plus folded bag right 3. Folder: Sword - Paper weight: 40-250g/sqm - Stack height pallet feeder: 1.200mm -Format: 738x1.100mm with pallet feeder 738x1.300mm with round pile feeder min. 210x297mm - largest fold length: 560mm - smallest fold length: 35mm (58mm in bag 1) - Capacity: max. 240m/min, 35,000 cycles/h in cross-fracture - Dimensions: 4.379x1.870 - Weight: 2.441/2.578kg; Pallet/Round Pile Feeder On request, w ...

Offer consists of: Horizon AFC-746 F 6-pocket folding machine - Parallel fracture rolling condition: % - Cross-fracture rollers I condition: % - Cross-fracture rollers II condition: % - Rollers overhauled parallel fraction: 2.926€ - Cross-broken rollers on request - Folding machine AFC-746 F Horizon folding machine AFC-746 F: 1. Folder: 6 pockets 2. Folder: Sword plus folded bag right 3. Folder: Sword - Paper weight: 40-250g/sqm - Stack height pallet feeder: 1.200mm -Format: 738x1.100mm with pallet feeder 738x1.300mm with round pile feeder min. 210x297mm - largest fold length: 560mm - smallest fold length: 35mm (58mm in bag 1) - Capacity: max. 240m/min, 35,000 cycles/h in cross-fracture - Dimensions: 4.379x1.870 - Weight: 2.441/2.578kg; Pallet/Round Pile Feeder On request, we can organize the following points for you: Packaging, loadin ...

Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...

6 Pockets, 2 Knives  ... more information

(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery  ... more information

Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories  ... more information

Flatpile Feeder, 4 Pockets, 4 Pockets, 2 Pockets, Delivery ... more information

Roundpile, 4 pockets, 1 electronic knife, delivery  ... more information

Steel TD 52/4/4/2 year 2001 flat pile feeder with Tremat Compressor Automatic Buckles SBP 46.2 up right sheet delivery Double Gate Fold very good rollers very good condition available immediately from stock in Germany  ... more information

3 MONTHS WARRANTY Offer consisting of: Horizon AFC-546 AKT 6-pocket folding machine - Parallel fracture rolling condition: % - Cross Break Roll Condition: % - Technology: Touch & Work - Folding roller adjustment: automatic - Memory fold types: 17 standard fold types pre-programmed - Job storage: 100 memory locations for repeat jobs - Number of pockets / swords: 1. Folding: 6 pockets + sword - Operation of swords: fully automatic -Format: max. 540x760 mm; min.120x172 mm - Paper weight: 40-250g/sqm - Output: max. 40,000 cycles/h - Stacking height: max. 650mm - Power: 400V / 50Hz - 2.7kW - Dimensions: 2.780x1.050x1.680mm - Weight: 1.350kg If you wish, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

mobile 2nd folder with 4 pockets, TD-66/4-T Motorized adjustable pockets Soundproofing hood  ... more information

Pallet feeder PFH-66 4 Combi Fold Pockets BUH-66 High Performance Cross Fold CUH-66 Window pocket Gluing device Compressor stream delivery with press  ... more information

Maximum sheet size 660 x 1280 mm, Pallet feeder, 4 buckles first unit, First cross knife (8 pages) Second cross knife ( 16 pages) parallel buckle to the first cross knife. SB-46/MP.D Press delivery. Noise hoods, Pump, Technical documentation, Standard tools. Intergrated counter.  ... more information