subcategories
(3rd category level)
Manufacturer:
(Category: 204)
Planing and sanding width max. approx. 1350 mm, workpiece thickness approx. 3 - 160 mm, belt feed infinitely variable approx. 2.5 - 13 m/min, equipped with a cutter head, power 30 kW, cutting speed 48 m/s. 1st calibrating roller - steel contact roller, power 22 kW, cutting speed 18 m/s, diameter 240 mm. 2nd calibration roller - corrugated rubber approx. 85 degrees Shore, power 18.5 kW, cutting speed 18 m/s., sanding belt dimensions 2620 x 1370 mm2800 x 2400 x 2600 mm6000 kguncheckedex foundation, unpackaged
An LSM8-U under-table sanding machine is available. Sanding belt dimensions: 2620x1350mm, sanding width: 1300mm, working height: 1000mm, drum diameter: 150mm, belt speed: 24m/s, suction volume: 89.5mÂł/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 2400mm/2100mm/2500mm. Documentation available. On-site inspection is possible.
grinding length: 1730 mmgrinding width: 930 mmweight of the machine ca.: 6,5 tworkpiece height: mmtotal power requirement: kWdimensions of the machine ca.: mautomatic infeeddigital read-outelectro magnetdressing deviceexhaustion devicecoolant deviceTechnische Daten / technical details:gr. Schleiflänge / max. grinding length 1730 mmgr. Schleifbreite / max. grinding width 930 mmVerfahrweg vertikal / travel vertical 550 mmMagnet / electro magnet 1600x800 mmSchleifscheibe / grinding wheel 400x60x127 mmAntriebsleistung Spindel /power capacity spindle 11/15 kWGewicht /weight 6500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11 ... more information
I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same. ... more information
Manufacturer: Giradina, Type: BĂĽrste, Year: 2005, Monting of the machine: BĂĽrstenaggregat, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 60, Diameter of brushes: 300, Number of rotations controlled: no, Fast exchange device: yes, Through running hight max mm: 60, kW output motor: ca.1,5, FREE TEXT: Maschine ohne Welle/, Year :2005
Manufacturer: Heesemann StruckturbĂĽrstenmaschine, Type: BM 8, Year: 2005, Monting of the machine: Brush/Brush/Brush, Number of units: 3, Working widht mm: 1300, Diameter of brushes: 400+400+150 mm, kW output motor: 7,5+7,5+1,5, Feeding speed continous adjustable: 13-65 m/min, Weight approx. kg: 6.000, Work piece width min-max mm: 1300, Year :2005
TECHNICAL DATA: Mm useful width: 1600 02 Incoming tilting side brushes Cross rotary brush group Horizontal brush group Horizontal brush group Cross brush roller group Weight Kg: 2500 KW installed power: 11 Complete with 1000mm "Italmeccanica" carpet ... more information
I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.
TECHNICAL DATA Sanding belt motor Power: 2 x 7.5 + 5.5 hp Conveyor belt motor Power: 3 hp Height adjustment Power: 2 hp Suction nozzle Above: 150 mm Bottom: 180 mm Dimensions Dimensions of sanding belt: 300 x 1900 mm Maximum Sanding Thickness Maximum thickness: 200 mm Working height Working height: 950 mm Speed Conveyor Speed: 8 - 16 m/min3000x1400x2030 mm3000 kguncheckedloaded on truck
Inv. Num. : 6016 Type: S2-T233 Producer: VIET Created: 2005 Parameters: Operating hours: 1600 h Switching-on hours: 600 h Sanding belt length: 5090 mm Sanding belt width: 150 mm Vacuum bandwidth: 1350 mm Grinding roller: 190 mm 2 longitudinal grinding belts at the top 3 engines Cross loop unit
Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwin ...
Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Monting of the machine: Q/L/L/Bürste, Sanding width mm: 1.300, Sanding hight mm: 3 - 140, Number of sanding belts: 3, Sanding belt dimensions: 3.250x1.350 6.200x150, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13 / 17, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 13 / 17, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 6 - 30, Transportbandantrieb kW: 5,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Weight in kg: 8.000, FREE TEXT: mit Neuem Transportteppich/Maschine gereinigt und gestestet, Year :2005
Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Sanding width mm: 1300, Sanding hight mm: 3-80, Sanding belt dimensions: 2620x1350, Konstantentisch: yes, Längsschleifaggregate: 1, Band 1 Leistung kW : 18,5, Band 1 Schleifbandgeschwindigkeit m/s : 0,5-20, Continous adjustable feeding speed m/min: 13-65, Transportbandantrieb kW: 7,5, Vacuum table: 5,5 kW, Brushing unit: 150 mm - 1,5 kW, Weight in kg: 6.500, Year :2005
Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005
USED UNTHA SINGLE SHAFT SHREDDER 60 kw, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder mot ...
Manufacturer: Fladder, Type: Gyro 300, Year: 2006, Control: Programm, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 120, Diameter of brushes: 320, Number of rotations controlled: yes, Units mounted upright: 4, Cross-brushing unit: yes, Through running hight max mm: 120, Vacuum belt: yes, Feeding speed continous adjustable: yes, Workpiece clamping technology: Vakuum, Year :2006
Machine no. 0411230006, working width approx. 1350 mm, longitudinal sanding unit with electronic shoe and intermediate lacquer sanding, brush, table with vacuum2500 x 2400 x 2600 mm2700 kguncheckedloaded on truck ... more information
Belt conveyor "Italmeccanica" mm: 1000 Working width mm: 1600 2 brushes for lateral processing in the entrance area Longitudinal machining brushes Horizontal brush unit Horizontal brush unit Brush roller (transversal) Weight Kg: 2000 Total connection KW: 15.5 ... more information