boring mills, machining centers used for sale

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 840 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 8000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 (15 min) kWtool change unit: 30 Pos.voltage: 380 Vtotal power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- CNC Control Siemens 840D- INTERFACE FOR 4 AXIS+ 4 AXIS NIKKEN- HP COOLING TROUGHT THE SPINDEL 20bar- CHIP CONVOYERThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 700 mmz-travel: 610 mmControl: Siemens 828 D total power requirement: kWweight of the machine ca.: 8,7 tdimensions of the machine ca.: mONLY 2800 HOURS SPINDLE WORKSDescriptionThe QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. SpecificationTable size 500mm diameterTravels – X/Y/Z axes 800 x 700 x 610 mmA Axis + 30 deg ~ -120 degC Axis 360 deg continousMaximum swing 630 mmTable surface to spindle nose -25mm ~ 585mmSpindle nose to tilting centre at 90 deg -25mm ~ 585mmMaximum work piece of size 630mm dia x 300mmTable load capacity 300kgSpindle taper BT40Spindle options 10,000 / 12,000 / 15,0 ...

Description: Description: Machine for machining sheet materials, wood, wood composites, and plastics. Electrical Connection: 400 Volts / 3 Phase + Neutral, 50 Hz. Electrical Power: 5 kW. Axis Dimensions: X-axis: 1300 mm. Y-axis: 2500 mm. Z-axis: 200 mm. Motion Accuracy: X, Y, Z Motion Accuracy: ± 0.05/300 mm. X, Y, Z Repositioning Accuracy: ± 0.05/300 mm. Table Surface: T-slot aluminum extrusion + vacuum grid. Structure: Z, X Structure: Gear rack and pinion with Hiwin profile guidance. Y Structure: THK ball screw and Hiwin profile guidance. Speed: Maximum Travel Speed (Rapid Feed): 9000 mm/min. Maximum Operating Speed: 6000 mm/min. Spindle: Spindle Motor Power: 3 kW (S1 rating). Maximum Spindle Motor Speed: 18000 RPM. Control System: EDINGCNC Ethernet controller. Compatibility: Windows XP/Vista/7. serial number: 15070402AAABA, x-motion: 1,300 mm, y-moti ...

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

We are happy to offer: 1 used and VERY well maintained HUNDEGGER SC 3 with full equipment. From 2016 200 mm version. TOP 1 a condition. Year of construction 2016 Available approx. Oct. - Nov. 2024 Technical equipment on request The entire system is insured against fire, storms, etc. until the day of dismantling. Full functionality is guaranteed in writing until the day of dismantling. In order to purchase the machine, a deposit of 70% of the sales price plus VAT must be made. The remaining payment is made exactly 6 weeks before the set dismantling date. The machine is sold as is from the Germany location without warranty. The machine can be viewed during operation after a written appointment has been made. The purchase price includes the removal of all anchors such as welding seams, air, electricity and loading using a mobile crane, but not the pure dismantling of ...

Manufacturer: Biesse, Type: Skipper V31, Year: 2016, Software: Biesse Works, Work piece width min-max mm: 70-900, Work piece length min-max mm: 200-2500 (3200), Work piece thickness min-max mm: 10-70, Working range X: 2500, Working range Y-axis: 900, Number of milling spindles: 1, Power kW 1: 4,5, RPM min-max 1: 18.000, Vertical drills-X: 5, Drill vertical Y: 5, Horizontal drills-X: 4, Drill horizontal Y: 2, Sawing unit: yes, Number of drill spindles: 10+6, Lochraster: 32, Drilling engine kW: 10, Year :2016

Blue Max mini Hardware drilling machine Spindle number 6 Table-top model Engine 0,8 KW 400V 50 Hz Masch. No. 04416 Pneumatic drill feed Fence without stand (optional) Year of build 2016 G & 2574-M3I2J  ... more information

SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions

We are happy to offer: A new used and very well-maintained ABA from HUNDEGGER without planer Type. Hundegger K2i 450 – with 5 axles Year of construction 06.2017 Fully automatic timber conveying with Feed and feed cross conveyor for lengths of 13 m Under-table swivel cross-cut saw 11 KW Universal milling unit – 5 axes 1 drilling rig vertical 2.2 KW 1 drill rig horizontal 2.2 KW 1 drill rig hydraulic 3 KW vertical 1 hydraulic drill rig 3 KW horizontal 1 finger cutter vertical 5.5 KW 1 horizontal slitting device at the rear 8 mm x 480 mm 1 marking device at the rear – stop side 1 front marker 1 marking and labeling device at the back 1 InkJet 4 System HP stop side 1 fully automatic hydraulic beam turning station 1 placeholder for turret milling machine 4 compartments Refined machine surface 3 extensions of the discharge track Control unit with disposal an ...

Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...

Description: Axis Configuration X-Axis: 3690 mm Y-Axis: 1730 mm Z-Axis: 300 mm Max Power Max Electro spindle power: 11/13 kW Max power installed: 20 kW Utilities Vacuum pump capacity: 90 m3/h Compressed air pressure: 0.6 kPa Compressed air consumption: 250 NI/1 Air connection coupling: Gas ½” Dust Extraction Dust extraction outlet: 200 Ø mm Extraction air consumption: 3200/3400 m3/h Extraction air speed: 28/30 m/s Control & Program Control: Genesis evolution runs on Windows system Machine Type 3-Axis CNC Machine Motor Type Horizontal Motor Processing Units Drilling Unit Groove Saw Tool Storage Tool Magazine Fixturing System Pods, Rails, and Clamps  ,vacuum pump: 90 m³/h, total electrical load: 20 kW, x-motion: 3,690 mm, y-motion: 1,730 mm, z-motion: 300 mm, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,300 x 2,000 mm, weight approx.: 3,000 kg

Description: Machine: Net working area:min 200x70 ,mm ,to max 3050x850 ,mm Workpiece thickness:12-60 mm Workpiece weight: max 35 kg Speed: X and Y: 50 m/min, Z: 15 m/min Drill aggregates: 5 Drill spindles for machining the top of workpiece in 'X direction'. All 5 bores are individually adjustable 4 Drill spindles for machining the top of workpiece in 'Y direction'. All 3 bores are individually adjustable 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 bores are individually controllable 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 bores are individually controllable Free aggregate - Motor 5 KW-S1 ( 1,250 / 24,000 rpm) Saw aggregate: Integrated saw aggregate - Cutting diameter 100 mm . Equipment: Programming and control system POWER CONTROL PC 85 + WOODWOP SOFTWARE - PC - TFT color screen with graph ...

Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts)Approx. Onsite Dimension. (l x w x h): 3,364 x 2,600 x 1,300 mm ...

Machine Size 2800 x 1940 x 2000mm Min. Size of machined panel 200 x 35 x 8mm Max. size of machined panel 3200 x 900 x 60mm  ... more information

working area: 5-40 x 1.000 mm- - -: - - - - - -- - -: - - - - - -Deep hole drilling machine | TIBO - tibo. E 40-1-1000The machine is in a very well-maintained condition.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: tibo E 40 1 1000 | tibo E40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...

Description: Model: Format4 Creator 950 Type: CNC Center Year: 2018 Drilling Unit: Included Router: Included Software: WoodFlash Max. Width: 950 mm Length Measuring Device: Yes, in X-axis Clamps: 2, in X-axis software: Woodflash, Approx. Onsite Dimension. (l x w x h): 3,000 x 200 x 2,500 mm, weight approx.: 2,500 kg

Description: Use: The CNC Router is suitable for all types of plastics, wood, composite materials, and non-ferrous metals such as copper, aluminum, brass, etc. Hours: Spindle Hours: 967 hours, still in daily use. Machine Running Hours: Approximately 4300 hours. Name: CNC ROUTER Brand and Model: JINAN SUDIAO 2141 (2018) Specifications: Work Area: 2100x4100mm Spindle Power: 9.0kW Italy HSD air cooling spindle Tool Holders: ISO 30 Tool Capacity: 12 Tool ATC carousel Control System: Taiwan Syntec 6MB Control System with handwheel Motors and Drivers: 750w Japan Yaskawa servo motors and drivers Reducer: Japan Shimpo Reducer Table Structure: Vacuum suction table with T-slot Guide Rail: Taiwan PMI Square orbit 30mm Driving Method: Germany Herion Helical gear rack transmission Transmission Type: X,Y: Rack and pinion Z: Ball Screw Inverter: 11kW Delta Inverter Vacuum System: 4kW Air pump Po ...

Manufacturer: Vitap, Type: Point K2, Year: 2018, Barcode scanner: yes, Machining stations: 1050, Work piece width min-max mm: 1010, Work piece length min-max mm: unendlich, Work piece thickness min-max mm: 50, 3 axis control: yes, Working range X: 270 - unendlich, Working range Y-axis: 185 - 1200, Working range Z: 4 - 50, Vertical drilling station from below: 9, Milling spindles horizontal: 1 vertikal, Power kW 1: 5,0, RPM min-max 1: 12.000 - 24.000, Milling spindles vertical: yes, Horizontal drills-X: 2 + 2, Drill horizontal Y: 1 + 1, Sawing unit: 100 mm, Lochraster: 32, Machining stations: 1050, Year :2018