Manufacturer:
(Category: 209)
Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...
Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
tahlkonsole with height adjustable table Table 720 x 500 mm, thickness 8 mm Weight 20 kg Built in 1975 The console is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland
Description: LANDONIO lathe model TEPC1200, hydraulic, with accessories and tailstock spindle for out-of-length machining 2800 x 1000 x 1400 + pallet 1200x800x500 + spindle 2200x20x20Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 2,000 kg ... more information
Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977 ... more information
Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014
Number of arms: 3 pcs. max. lifting capacity: 2 t - with heavy-duty storage arms - Arm lift and adjustment by hydraulic cylinder - Substructure in heavy steel construction Year of construction 1979 Revision year 2014 ... more information
Power: 11kW, rotational speed: 1450/min. ... more information
Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014
Debarking machine type cambio 75 6-arm air ten rotor approx. 8 years old. Machine in good condition. The machine has been completely overhauled in 2007 and can be visited at any time or expanded from the existing log yard. Plant with indentation and centering system and extract roles work. ... more information
complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition. ... more information
Power 3Kw Speed 2800 rpm Air volume 1000-3500Nm3/h Total pressure difference 1000-400 N/m3 Hdqibj2 Several suction pipes, trouser tubes, etc. ... more information
Castle admission machine Drilling group, Kettenstemmer, Stulpfraese with turret stop for doors in left-right execution. L x W x H: 100 cm x 60 cm x 220 cm Built in 1982 Weight approx. 400 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg ... more information
WOOD HER TYPE 1117 built 1983 0.55 / 0.75 kW (380V / 16A plug) 3-rolls (new) 8 speeds 4 / 6 / 8 / 10/ 12 / 15 / 20 / 30 m/min. from location ... more information
width 3200 mmPanel feed by chains, chain width 80 mm Feed speed max ? m/min, 4 kWDogs every 11 cm.Equipment:1+1 Jump scorer1+1 Hogger1+1 Jump shaper1+1 Jump shaper1+1 Jump shaper1+1 Jump shaper ... more information
Pellet mill / press CPM 7900 aftre renovation Dia inch : 30 - 762 mm Die width : 8 - 210 mm Die surface 5025 cm² KW : 250 KW Machine type : 7900 Buildyear : 1984 Width rollers : 215 mm Dia rollers : 350 mm 1 set rollers Oil cooling Twin mixer 2 x 15 KW / Die Hosting system New inlet in stainless steel
Disc chipper, inlet width = 340x380 mm disc chipper, infeed dimensions = 340x380 mm ... more information
Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985 ... more information