other machinery for waste disposal and recycling used for sale

The Vulcan is Hitacht's fastest metal analyzer with the most advanced display and reporting system. Compared to its predecessor, the m-Pulse, it has been fundamentally redesigned and offers many new possibilities, such as GPS, camera, WiFi and pre-burning function. The operation is functionally oriented to the menu guides, as they are known from smartphones. The operation of the device via the functional touchscreen is correspondingly easy. The equipment offered here comes from our demonstration pool and is only 12 months old, so it is still sold with a used machine warranty.

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request

Motor power 11kW with double pump Control SPS, supported two-hand operation -with a key-operated switch for control voltage / from Cutting force 2 x 20to Feeding channel working width max width 2500 mm loading channel working height = height = 1535 &gt; mm extended knife steel under-sink reinforced, straight version incl. two openings for forklift loading -Colours: Corpus RAL acc. to customers request Cutter bar &amp; grille Ral1028 / melon yellow delivery time: approx. 12-14 weeks Price and photos upon request

- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request

The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.

Small vibrating sieve with two decks for three fractions. The diameter of the sieve inserts is 400 mm. This includes a bet with balls that keep the screen insert clean from below. This is suitable, for example, for the screening/classification/quality assurance of copper granules (contamination by plastics or aluminium are sifted) or for the re-treatment of plastic granules from the cable recycling. The sieve is located in our demo pool and is little needed.

Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm – 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Used roll packer Manufacturer: Bergmann Type: RP 7801-69 Year of manufacture: unknown specifications: Weight: 3,100 kg Power: 5.5 kW, 12.5 A Pmax.: 220 bar Noise level: 69 dB(A) The hydraulic motor has recently been renewed. Technical description: The rolling roller for compaction of waste and garbage is an invention from BERGMANN. For 30 years, this technology has been in continuous use worldwide – at recycling centres, in wholesale markets, industrial plants and elsewhere. Clean, highly efficient and extremely low-maintenance! The principle is simple: a heavy-duty compaction roller with hydraulic self-propulsion is guided over an articulated mast in the container and captures, tears and compacts the Einfüllgut.Im dialogue with its customers, BERGMANN has repeatedly expanded its machine family of roll packers: from roll packers, which have its fixed  ...

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

On and off when needed Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power about 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuum vent 4 kW Discharging hopper complete with 200 mm diam. diagonal auger for agglomerated material 1,5 kW drive.size Z x ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw to one of the 2  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Dries, reduces size and degasses materials in one step. For PE PP PET PS ABS PC PET PVC POLYLAMINATED, PULPER etc. Low maintenance costs No operator needed High ROI Huge output, heavy duty, made for 24/7 job 400 kw drive (260 kw in work) Italian technology and material quality standards. Output in a continuous flow The melted plastic can feed extruder directly with high energy saving, to be filtered and granulated, thus forming a complete, automatic line from scraps to granule We can provide the special extruder needed for the purpose. The line includes normally : buffer with extraction screws on supporting structure + extruder with motor, gearbox, pulpit control panel, + electric cabinet + strand matrix On separate request : cooling calander, cooling belt, conveyor belt to buffer, metal detector, square matrix with hydraulic pack (for special purposes) Post-sale assistance for spares, a ...

This ECS is used to separate the non-ferrous metal fraction from other scraps in plastic recycling lines.., It can handle very small parts but even larger ones, up to 400 mm, depending on the model., Metals which will be separated are : copper - alluminium - brass - bronze, Constructed in a workmanlike manner, durable and efficient machines made in Italy, these devices offer excellent performances in any plastic processing line., To get a customized offer, please send us :, - material processed and size, - contamination % and type, - max contaminants size, - throughput rate of the line

LeFort 900 year of manufacture/production year: unknown/unknown. Drive/drive: 22 KW length of knife / blade lenght: 900 mm width at the tip / blade tip to tip: 340 mm hydraulic hold-down/hydraulic hold down overhauled/recondition  ... more information

Technical data for the bale loosening drum:Manufacturer not knownType of bale loosening drumYear of manufacture not knownDimensions of the drum 6000 x 3000 mm (l x d)Height of the welded-in helix 300 mmDimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H)Drive power 2 x 4 kWFunctional description:The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing.Scope of delivery:Bale loosening drumFrame with drive and roller bearings for the bale loosening drumComments:Documentation (operating  ...

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available  ... more information

used optical sorting device Manufacturer: TiTech Type: PolySort 1000 Serial No.: X092M, A551003-00  ... more information