peripheral equipment (e.g. heating, conveying, drying) used for sale

Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Extraction system with 2 bags Connection ø 160 mm Fan 2,2 kW L x W x H: 200 x 70 x 220 cm Weight approx. 120 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433  ... more information

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

Withdrawal system 2 bags EXHIBIT WITHDRAWAL SYSTEM N E U! AF-22 dust extraction system Bj.2007 place need 1300x580x2150mm engine strength 400 V 2.2 kW 3 HP filings bag contents of 2 x 200 l Max Volumenstrom of 3100 m?h Max Unterdruck of 2510 Pa in-patient OR MOBILE box of building blocks system suction connection: 160 mms or 120 / 80 mms standard dust filter or polyester fleece cartridge filter AF-22 In-patient 401-257 AF-22 Mobile 401-256 PICTURE WITH DRIVING EQUIPMENT!

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902  ... more information

Conveyor belt / waste conveyor belt Length 8100mm (without climbing conveyor) The vertical conveyor is 1900mm long and conveys to a height of 1050mm. Total width 900mm Belt width approx. 520mm  ... more information

Extraction system mobile With floor nozzle Make Pieper Type KP 140 Machine No. 79273 Mobile extraction system including floor nozzle Chip bag diameter 600 mm Suction connection diameter 140 mm Motor power 1.1 kW Plastic impeller Wheeled on wheels Operating height 2500 mm Transport Dimensions 1300 mm x 800 mm H 1600 mm Weight 79 kg plus pallet

Cross conveyors Conveyor path – length of the transport chain 2200 mm + 3 rollers 200 mm Width 6 m 5 conveyor chains spread over a width of 6 meters Distances between conveyor chains: Between conveyor chain 1 – 2 distance 800 mm Between conveyor chain 2 – 3 distance 1000 mm Between conveyor chain 3 – 4 distance 1900 mm Between conveyor chain 4 – 5 distance 2100 mm Brackets conveyor chains are welded

Filter ceiling Walther Year of construction: 2005 consisting of 2 parts each L 2000 mm x W 1950 mm x H 400 mm with 1 fan NZ 400 Fabr.-No. 421242.3 Year of construction. 20055 Volume flow 1100 – 7150 m³/h 230/400 V, 5.4/3.1 A, 50 Hz, 1.35 kW  ... more information

SPECIFICATIONS: Max. processing dimensions mm: 2400 x 1150 extendable and tiltable, suitable for processing doors Pneumatic operation  ... more information

Fields AF-16 Aspirator Motor 2.2kW 400V Year of manufacture 2018 with filter cartridge for shaking with distributor D=100/100mm and slider G&-5082-M376X  ... more information

TECHNICAL DATA: 04 roller conveyors mm: 1900 x 6000 01 roller conveyor mm: 3000 x 1200  ... more information

TECHNICAL DATA: Dimensions mm: 3500 x 2000 x 2240 H Panel dimensions mm: Length mm: 1800-2280 Max width mm: 80 Capacity Kg: 100 Speed mt / min: 38 Height min. loading / unloading mm: 250 Height max. loading / unloading mm: 1500 Grip type: Suction bar  ... more information

TECHNICAL DATA: Main motor power KW: 90  ... more information

Main engine KW: 90  ... more information

SPECIFICATIONS: Filter station for wood chips Air flow rate: 7,500 m3/h Number of cotton filter bags: 48 - Ø mm 200 Height mm: 2500 6 bags: diameter mm 500 6 Atex panels 1 vibrator for vibrating hoses KW 11.0 Fan Complete with: - Inspection door - External staircase - Filter room -Piping

Suction blower MTV 6040 D Masch. Item no. 708,438 Motor power 11 kW 1450 rpm ø approx. 700 mm Year of construction 1982 The machine is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12