Manufacturer:
(Category: 1300)
Operating modes: Automatic (at regular intervals) and pedal control. Volume range: 200ml-5000mm, material of product contact parts: AISI 316 stainless steel. ... more information
Measuring range X/Y/Z: 700mm/1000mm/660mm, resolution: 0.039μm, max. measuring weight capacity: 680kg, dimensions X/Y/Z: 2200mm/1500mm/2900mm. ... more information
Production speed: 25000/h, placement accuracy: 0.065mm, component dimensions: 2.5mm and 5mm. Loading and unloading of PCBs must be done manually due to a defect. 380V transformer included. ... more information
A magazine loading unit and a magazine unloading unit for the Panasonic Panasert MB series are available. Including a 230V transformer. ... more information
The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible.
One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available. ... more information
Number of heads: 16, weight: approx. 800kg. Including 4 additional weighing heads with electronics. ... more information
KUKA robots are used in a wide range of applications, e.g. handling, welding, assembly, packaging and other automation tasks. Payload: 10kg, reach: 900mm, weight: 52kg. On-site inspection is possible. ... more information
The staple fibre plant for sale specializes in the production of regenerated fibres from recycled raw materials and is designed for demanding applications in the automotive and textile industries. With a daily capacity of 35-40 tons per titer range, the plant is designed for two production lines and a downstream belt line with semi-automatic baling press. The production line includes important process stages such as drying and dehumidification, extrusion, spinning, fiber drawing, drawing and crimping, followed by a cutting process and packaging in bales. Extensions and modernizations were carried out, including 5x SCHOLZ dosing systems (2013), 4x extruder screws for line C (2014), 24x spinning pumps for line C (2015), 25x spinning pumps for line D (2016), as well as a conversion of all systems in the sliver line to individual drives from SIEMENS (2015). In addition, various components su ...
Cutting width min./max.: 25mm/1320mm, max. stack height: 140mm, pressure range: 30N-300N. ... more information
MAS 3a block making machine for paving blocks, hollow blocks and kerbstones. Board dimensions X/Y/Z: 1200mm/1100mm/50mm, production height min./max.: 50mm/330mm. 80x transport racks, 1700x base boards: dimensions X/Y/Z: 1200mm/1150mm/50mm. Bucket conveyor with Rekers drive and tipping drive: Bucket capacity: 1850l. 2000x pallets: Dimensions X/Y: 1000mm/1000mm. Forms: Concrete blocks: 36.5, 36.5 Z, 30, 24, 17.5, 11.5, 1.5 NF, NF. Expanded clay blocks: 36.5, 36.5 Z, 30.5, 24, 11.5. Lawn edgings: 5/25/100, 5/30/100. Kerbstones: 8/25/100, rectangular paving blocks: 10x10, 10x20, 20x20, 20x30, 30x30x8 cm, 20x20x8 cm without chamfer. Pavers: 6-8-10 H, 8er S, 6eck 7cm. Planting rings: small, large, oval (24x45x20). Special stones: lawn grids, filter stones. Including all accessories/conveyor belts etc. Documentation available. On-site inspection is possible.
There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible. ... more information
There are 3 cabinets full of frequency inverters available. More detailed list available in the pictures. All frequency inverters work perfectly. Documentation available. On-site inspection is possible. ... more information
There are 4 Kuka robots with various grippers, control cabinets, housing and conveyor technology (Interroll) available. Designed for handling a power unit of wallboxes and handling the entire wallbox. KR120) Load capacity: 120kg, reach: 2700mm. KR50) Load capacity: 50kg, range: 2700mm. List with specifications of the accessories in the pictures.
There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.
A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available.
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).
Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.
2 test facilities with a Yaskawa test robot each are available. Load capacity: 7kg, reach: 927mm, repeatability: ±0.03mm, weight: 34kg. Axis speeds: S-axis: 375°/s, L-axis: 315°/s, U-axis: 410°/s, R-axis: 550°/s, B-axis: 550°/s, T-axis: 1000°/s. Documentation available. ... more information
Lifting capacity: 2500kg, lifting height: 5000mm, fuel: gas, operating hours: 19621h, weight: 3865kg. ... more information