Manufacturer:
(Category: 1300)
With documentation, was maintained regularly, an inspection is possible. ... more information
A Binar Quick-Lift 100 vacuum glass handling robot is available. Load capacity with vacuum suction cup for glass: 40kg, reach: 5000mm. Including base plate, which can be moved as required, and documentation. On-site inspection is possible. ... more information
Shielding box for electromagnetic compatibility, length: 728mm, width: 520mm, height: 520mm, with full absorber lining (ferrite absorber), 10x feed-through filters (banana sockets), BNC feed-through, cold device feed-through (filtered), Sub-D feed-through (filtered), waveguide feed-through for optical cables, double EMC seal, antenna feed-through (conduit feed-through), shielding attenuation and two gas pressure springs.
Envelopes (wallet): min.: 127mm/150mm, max.: 255mm/420mm, pockets: Center seam: min.: 228mm/127mm, max. 420mm/305mm, Side seam: min.: 228mm/127mm, max.: 420mm/262mm. Speed: 500 pockets/min, paper weight: 80g/m²-150g/m². ... more information
Motor power: 234kW, weight: 38t, operational hours counter: 25,323h, an inspection is possible. ... more information
Size range of the covers: Booklet min/max: 100mm x 150mm/180mm x 254mm, Pocket min/max: 89mm x 120mm/187mm x 305mm. Including: 1) Web splicer Contiweb , 2) Web alignment system BST EKR1, 3) Flexo printing units: 3 units, conventional, 2 units complete. 4) Window unit: cutting station W+D without splicer, 5) foil splicing unit, 6) side seams Dynatech, 7) Silicon P+S unit Nordson, 8) air cushion trolley for transporting the paper rolls, window punching bridge, round ceramic bar, 2x ink pump.
Working width: 25-210mm, embossing force: 100kN, heating output: 2200W. ... more information
A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible. ... more information
X-travel: 1500mm, y-travel: 800mm, z-travel: 1000mm, clamping table dimensions: 2200x1000mm, software: Metrosoft Quartis, weight: 5.15t, with motor-adjustable PH10M RBE pick-up head, the machine is not functional, the air bearing must be adjusted and the measuring system replaced. ... more information
Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. ... more information
Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. ... more information
Format range: envelopes min./max.: 156x127mm/675x460mm, envelopes min./max.: 156x127mm/675x360mm. Window material: max. roll width: 190mm, max. cut-off length: 250mm, material thickness: 30µm-50µm. Rubber coating: 30-50g/m², self-adhesive rubber coating max.: 20g/m². Output: gumming or adhesive gumming: 650 envelopes/minute, self-adhesive gumming: 500 envelopes/minute, 1/2-cycle gumming: 500 envelopes/minute. Paper weight: 80-165g/m². Dimensions X/Y/Z: approx. 30000mm/5200mm/4200mm. Including paper roll changer W+D 191W, printing block StackType-L, automatic wrapping machine W-D 910WR and compact palletizer W+D 930. Documentation available. On-site inspection is possible.
There are two identical NILFISK T40W PLUS L Z22 available, power: 4kW, weight: 167kg. ... more information
A standard Fanuc M-710iC/50 multi-purpose robot including Fanuc System R-30iA controller is available. Robot axes: 6, max. payload: 50kg, reach: 2050mm, repeat accuracy: +/- 0.03mm, weight: approx. 545kg. Documentation available. ... more information
With two edger, verifier and feed conveyor, machine was not used. ... more information
A Scheugenpflug A300 dosing system including drum station is available. For use with a 2-component casting compound consisting of PU resin and hardener. Dimensions X/Y/Z: approx. 740mm/1570mm/1760mm, weight: approx. 420kg. On-site inspection is possible. ... more information
Film width: 420mm, max. film roll diameter: 280mm, connected load: 2kVA, length: 1600mm, width: 767mm, height: 1292mm, weight: 228kg. ... more information
Travel X/Y/Z: 540mm/370mm/220mm, axis speed X/Y/Z: 24/24/9 m/min, repeat accuracy X/Y/Z: +/- 0.05mm/0.05mm/0.02mm, dosing head: 2-fold DOS P016, control: UPIC CNC. Dimensions X/Y/Z: 1000mm/800mm/2150mm, weight: approx. 450kg. On-site inspection is possible. ... more information
There are 5 unwinders and 2 rewinders Hunkeler available. 5x UW4 7119, built in 1998, 1999 and 2000, max. paper width: 520mm, paper weight: 60-250g/m², max. unwind speed: 180m/min, max. roll diameter: 1270mm, inner core diameter: 70-150mm, max. roll weight: 1000kg. 2x RW4 7121. ... more information