planing machines used for sale

Description: TRADE wire planer model CM-500: - 500x2850mm planes - shaft with 4 knives, with CPS protection - adjustable infeed and outfeed tables - tilting guide - rear electric panel machine ,Approx. Onsite Dimension. (l x w x h): 2,850 x 1,100 x 1,300 mm, weight approx.: 800 kg ... more information

Description: WEINIG moulder model PROFIMAT (260×180) FORTEC, in configuration for carpentry and laminated beam machining: - useful working dimensions 260x180mm - electronic control of 2 axes, SIEMENS SIMATIC OP7 programmer - cardanic drive and differentiated pneumatic pressure - variable feed speed 5 - 24 mt/min - feed motor KW 4 - HP 5.5 - upper feed unit before 1st shaft - lower feed unit after 5th shaft - machine table with air curtain - short infeed table 1050 mm - foot pedal lubrication pump - protection cabin - shafts D=40mm at 6000rpm - complete with tools D=120mm - Z=2 Shafts: 1- under kw 11 - hp 15 2- right 3- left (right and left with single motor kw 11 - hp 15) 4- above kw 11 - hp 15 5- under kw 7.5 - hp 10Approx. Onsite Dimension. (l x w x h): 2,300 x 2,000 x 1,900 mm, weight approx.: 2,200 kg

Description: CASOLIN Planer with a chain for the drive and has the option of processing the upper, lower, right or only upper and lower elementsApprox. Onsite Dimension. (l x w x h): 2,900 x 900 x 1,900 mm, weight approx.: 3,000 kg ... more information

Description: Four-sided planer for processing classic parquet with chain drive It can process parquet from 200 to 600 mm and from 32 mm to 100 mm wide The capacity of the machine depends on the size of the parquet, up to approx. 150 to 300 m2 per shift Approx. Onsite Dimension. (l x w x h): 2,400 x 900 x 1,500 mm, weight approx.: 1,500 kg

Working width: 510 mm; Planing shaft: V-bar shaft / strip knife; Number of knives: 4; dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: mech. Counter; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Pressure beams: link pressure bars; Table rollers: no; Motor power: 7 kW; Engine brake: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmfeed: 5-25 m/minCASOLIN MEGA 230/6 four-side planer--------------------------------------------------------6 spindles, with touchscreen controls.Width and height controlled.Spindle arrangement:1. Spindle: below, 40 mm diameter, 6,000 rpm, 5.5 kW2nd spindle: right hand, 40 mm diameter, 6,000 rpm, 11 kW together with3. Spindle: left, 40 mm diameter, 6,000 rpm4. Spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW5. Spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW6. Spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kWMachine without machining tools.The additional screen on the front of the machine is not included in the scope of delivery (belongs to the window system).(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the sof ...

Planing height 330 mm Working width 510 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 17.3.1  ... more information

Good day! I would like to offer you the following machine: 1 used thickness planer SCM S 630 - 63 cm planing width - 30 cm planing height - 4-knife Centrofix reversible knife shaft - Infinitely variable feed 6 - 20 m/min. - Steel feed roller - 2 rubber pull-out rollers - Articulated pressure beam - Longitudinally profiled, rollerless thickness table 63 cm x 100 cm - Thickness table adjustment via 4 spindles - Electric table adjustment with fine-stroke tip switch - Digital display with 1/10 mm - 7.5 KW 380 volt motor (reinforced version) - Star triangle switch - Motor circuit breaker - Main switch lockable with undervoltage release - Kill switch - Suction nozzle 150 mm - Weight: 950 KG New parts - Main engine installs new bearings (150,-- € + 19 % VAT) - Infinitely variable feed adjustment knob ...

working width: 410 mm; cutter head: strip knive; number of blades: 3; surface table length: 2400 mm; adjustment table: Hebel; read out table hight: Scala; fence tilting: yes; motor power: 4 kW; motor brake: no; machine length: 2400 mm; machine width: 800mm; waight: 750 kg;  ... more information

Working width: 510 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planing thickness display: Digital display; Feed speed: 5 / 8 / 10 / 16 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: link pressure bars; Table rollers: no; Motor power: 7 kW; Engine brake: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Code: 0283 Brand: PAOLONI Model: PR 180 - CE Standard Automatic 4-shaft moulding machine for wooden profiles, wooden frames and various - CE Standard Technical data Working width min/max mm 25/180 Working height min/max mm 6/120 workpiece length min mm 400 Input table length mm 2330 Standard tool diameter mm 125 Tool diameter 1° shaft mm 125 Diameter of trimming cutter mm 145 Diameter min/max tools 2°/3° shaft mm 100/160 Diameter min/max tools 4° shaft mm 100/140 Tool shaft diameter mm 40 Shaft rotation speed rpm 6000 Planer motor power Kw 4 Right and left vertical unit motor power Kw 5,5 Top horizontal unit motor power Kw 4 Lifting motor power Kw 0,35 Feed speed mt/min 6/12 Electric crossbar lift Protection cabin Manual table lubrication pump N° 4 suction inlets diameter mm 120 Overall dimensions mm 3800 x 1200 x 1600 h Weight kg 1550

Weinig PM 17 planing and moulding machine for four-sided planing and profiling of wood, including planing heads., spindles: 5, working width: 170 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, Tools: Included ... more information

Working width: 530 mm; Planing shaft: Centrofix; Number of knives: 4; dressing table length: 2200 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: manual; maximum clearance thickness planer: 220 mm; Height adjustment thickness table: electric; Indication of planing thickness: mech. Counting display; Feed speed: 7 / 14 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: articulated; Table rollers: no; Motor power: 5.5 kW; Engine brake: yes, automatic; Suction port: 160mm; Machine length: 2300 mm; Machine width: 950 mm; Weight: 1050;

Thickness planer, Thickness T 44 from Martin with Tersa shaft Planing width max. 630mm Planing height from approx. 3 to 250mm electrically adjustable, reading via LED display in 1/10mm accuracy, fine adjustment via tip button Drive motor 5.5kW Automatic engine brake 4-knife shaft Tersa with new knives 2 Feed speed 6m/min and 12m/min Rubberized infeed roller and rubberized outfeed roller renewed Articulated pressure beam Planed thicknessing table guided on 4 threaded spindles and guides for optimal stability Low-noise design with soundproof hood Suction nozzle 160mm Emergency stop front and rear Original paintwork, only partially reworked Carpet in original condition V-belt renewed Infeed and pull-out rollers renewed New knives CE Mark Dimensions approx. 1300 x 1150 x 1150mm (LxWxH). Weight approx. 1250kg. The machine can be demonstrated by appointment at our s ...

Number of spindles: 6 St.Working width: 240 mmWorking height: 200 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-36 m/min.SCM Superset NT PLUS Comp. 31 for window production-----------------------------------------------Technical data:-----------------------------------------------Working width: max 240 mmWorking height: max. 200 mmFeed: 6 to 36 m/min1. Spindle-----------------------------------------------First lower spindle horizontalMotor with brake 11 KWDiameter: 40mmSpeed 6,000 rpmFast tool clamping T-SET2. HSK tool holder-----------------------------------------------First right tool holder verticalMotor with brake 7.5 KWSpeed 8,300 rpmVertical and horizontal electronic positioning3. HSK tool holder-----------------------------------------------First left tool holder, verticalMotor with brake 7.5 KWSpeed 8,300 rpmVertical and horizontal electronic positioningel ...

Number of spindles: 7 St.Working width: min. 18 - 230 max. mmWorking height: min. 8 - 150 max. mmLength of the planing table: 2000 mmFeed motor: 7,5 kWFeed speed: 7-36 m/min.Kuper planer and moulder SWT 23 XLS-7------------------------------------------------------Machine still in use and can be viewedFurnishing:7 spindles each with 7.5 kW motor 40mm diameterWorking width: max. 230 mm, min. 18 mmWorking height: max. 150 mm, min. 8 mmFeed table: 2,000 mmSpindle arrangement:1. Spindle down, 6,200 rpm2. Spindle right, 6,200 rpm, axial NC controlled3. Spindle on the left, 8,000 rpm, axially and radially NC controlled4. Spindle right, 8,000 rpm5. Top spindle, 6,200 rpm, axially and radially NC controlled6. Top spindle, 8,000 rpm, axially and radially NC controlled7. Spindle down, 8,000 rpmSiemens PLC control large touch displayFeed motor 7.5 KW speed 7-36 m/minHeight adjustment electrically v ...

5 Waves Working width 15-230 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English  ... more information

New, unused You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

Width 510 mm 4 knives Neat, works You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

A combined Kölle HK 63 planer is sold. Gearbox was completely disassembled, cleaned, greased and adjusted. Both shaft bearings completely replaced. Thickness table adjusted to approx. 0.01 mm. Dressing tables were set parallel to each other. The feed and pull-out rollers as well as the pressure beam have been perfectly adjusted, so that there is no planing impact. Newly painted Ready for immediate use Dimensions approx. 210x120cm Planing width 63cm Planing height 22cm 4 Knife Shaft Strip Plane Knife 2 sliding rollers in the table 2 feed speeds Toothed Steel Feed Roller Steel Pull-Out Roller Loading facility available Price is gross (total price) VAT not deductible (margin scheme) The machine can and should be viewed and tried out on site, as a return and warranty are excluded. You can find our terms and conditions on our websit ...