- Air cleaner plants (1)
- Barking machines (6)
- Central heating installations (10)
- Charging plants (15)
- Chip exhaust installations (2)
- Clean air extraction units (3)
- Combi-machines (42)
- Creel (2)
- Double-end tenoning machines (8)
- Extraction Systems (60)
- Filtering units (1)
- Gang saw systems (5)
- High-speed clamping carriages (1)
- Hydraulic trimmers (2)
- Lathes (21)
- Lifting devices (14)
- Macerators (12)
- Mitre joining machines (2)
- Mitre punching machines (2)
- Pallet lines (8)
- Portable dust extractors (2)
- Remote-controlled carriages (1)
- Resawing machines (2)
- Scraper conveyors (1)
- Shredder (29)
- Suction units (9)
- Transportation belts (5)
- Wood crushing machines (28)
- Wood shredding systems (23)
- Wood turning lathes (8)
- Woodturning lathes (12)
- more
- A. COSTA (1)
- A. V.D. LINDEN (1)
- ABB (2)
- ABH (1)
- ACETI MACCHINE (1)
- ACKERMANN (1)
- ACM (1)
- ADDA (1)
- ADOLF ALDINGER (1)
- AEG (1)
- Aircraft (3)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- ALBUS (1)
- Alko (5)
- ALLGAIER (1)
- ALMAB (1)
- ALTENDORF (1)
- Alu (3)
- AMANO (1)
- ANGELO CREMONA (1)
- ARMINIUS (1)
- ASTRA ASPIRAZIONI DUE (1)
- ATLAS (1)
- AZETA (1)
- Babcock (2)
- BACCI (2)
- Bajler Zembrod (2)
- BALDUF (2)
- BALESTRINI (1)
- BANO (1)
- BAR GAR (1)
- Barbaric (2)
- BARTH (1)
- Bartling (3)
- Bauerle (2)
- BAUMANN (1)
- BöSCH (1)
- BECKER (2)
- BEER-FÖRDERTECHNIK (2)
- BENTELE (1)
- BENZ (2)
- BERNARDO (1)
- BESCHLAGWAGEN KOMMISONIERUNG (1)
- BEZOMBES (1)
- BI-MATIC (1)
- Biesse (9)
- BISON (1)
- BLUM (1)
- BLüMLINGER (1)
- Boere (7)
- Bohm und Kruse (2)
- BOSCH (1)
- BOSITICH (1)
- BRANDT (26)
- BRAUN (1)
- BRENTA (1)
- BREVETTI (1)
- BROTHER (3)
- BRUECK (4)
- BRUKS (3)
- BRUKS-KLöCKNER (1)
- BUHLER (1)
- BUSELLATO (2)
- CABO (1)
- CALZONI / SPERRY VICKERS (1)
- CAMAM (4)
- Cambio (2)
- CASADEI (5)
- CASATI MACCHINE (1)
- Casolin (4)
- CAT BLOWER (1)
- CATTINAIR (1)
- CAUL (3)
- CEFLA (1)
- Cehisa (2)
- Celaschi (2)
- CENTAURO (5)
- CERVIA (1)
- CICAR (1)
- CIT-MECCANICA (1)
- CKM (1)
- CLAAS (1)
- CMC (1)
- CML (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- Colombo (2)
- COMAFER (1)
- COMEC (4)
- COMEVA (1)
- CONSTANT PHILIPS (1)
- CONTIMAC (1)
- COOK BOLINDER (1)
- COOK BOLINDERS (1)
- COOK BOLINDERS + MECOUTIL (1)
- COPCAL (1)
- COSMA (1)
- COSTA (2)
- CPM (1)
- ... more
Manufacturer:
(Category: 209)
New in: 2002
used
Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. ... more information
New in: 2000
used
Table dimensions: 10,140x2240mm, milling/ drilling aggregate rotational speed: 5000-30.000/ 2100-8000/min, controls: SIEMENS SINUMERIK 840D, operational hours counter: 48,740h. ... more information
New in: 2012
used
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible. ... more information
New in: 1989
used
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible. ... more information
New in: 2014
used
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h. ... more information
New in: 1979
used
Power: 11kW, rotational speed: 1450/min. ... more information
New in: 2001
used
Length: 11,250mm, width: 5250mm, height: 2600mm. ... more information
New in: 1997
used
Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. ... more information
New in: 2001
used
Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information
New in: 2002
used
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW. ... more information
New in: 1998
used
New in: 2000
used
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information
New in: 2002
used
Current: 50A, nominal voltage: 400V. ... more information
New in: 1999
used
With feeder and destacker Wemhöner 184. ... more information
New in: 2004
used
Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. ... more information
New in: 2009
used
Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023. ... more information
New in: 2001
used
Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. ... more information
New in: 2021
used
Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. ... more information
New in: 1993
used
The machine cannot be started up at the moment, it will probably be the memory batteries of the control, including replacement control with display, an inspection is possible. ... more information
New in: 2021
used
Speed of axes X/Y/Z: 50/50/15m/min. Vertical drilling unit: feed stroke Z: 60mm, max. drilling depth: 38mm, spindle speed: 1500-7500rpm, drill holder diameter: 10mm, max. drill diameter: 35mm, spindle distance: 32mm. Horizontal drilling unit X/Y: max. drilling depth: 36mm, drill holder diameter: 10mm, max. drill diameter: 20mm. Tiltable grooving saw 0°/90°: number of saws: 1, max. saw blade diameter: 125mm, max. cutting depth: 30mm. Tool holder HSK63: max. tool diameter: 60mm, max. tool clamping length: 175mm, max. tool weight: 5kg. Operating hours: 3430h. Documentation available.