- (1)
- Air cleaner plants (1)
- Barking machines (6)
- Central heating installations (15)
- Charging plants (15)
- Chip exhaust installations (2)
- Clean air extraction units (3)
- Combi-machines (43)
- Creel (2)
- Double-end tenoning machines (8)
- Extraction Systems (80)
- Filtering units (1)
- Gang saw systems (5)
- High-speed clamping carriages (1)
- Hydraulic trimmers (2)
- Lathes (20)
- Lifting devices (14)
- Macerators (12)
- Mitre joining machines (2)
- Mitre punching machines (2)
- Pallet lines (8)
- Remote-controlled carriages (1)
- Resawing machines (2)
- Scraper conveyors (1)
- Shredder (29)
- Suction units (8)
- Transportation belts (9)
- Wood crushing machines (27)
- Wood shredding systems (19)
- Wood turning lathes (8)
- Woodturning lathes (12)
- more
- A. COSTA (1)
- A. V.D. LINDEN (1)
- ABB (2)
- ABH (1)
- ACETI MACCHINE (1)
- ACKERMANN (1)
- ACM (1)
- ADDA (1)
- ADOLF ALDINGER (1)
- AEG (1)
- AIGNER (1)
- Aircraft (3)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- ALFARO (1)
- Alko (5)
- ALLGAIER (1)
- ALMAB (1)
- ALTENDORF (1)
- Alu (3)
- AMANO (1)
- ANGELO CREMONA (1)
- ASTRA ASPIRAZIONI DUE (1)
- ATEMAG (2)
- ATLAS (1)
- ATLAS COPCO (1)
- AUTOMATIC BOARD STACKER (1)
- AZETA (1)
- Babcock (2)
- BACCI (2)
- Bajler Zembrod (2)
- BALDUF (2)
- BALESTRINI (1)
- BANO (1)
- BAR GAR (1)
- Barbaric (2)
- BARTH (1)
- Bartling (3)
- Bauerle (2)
- BAUMANN (1)
- BöSCH (1)
- BECKER (2)
- BEER-FÖRDERTECHNIK (2)
- BENTELE (1)
- BENZ (2)
- BERNARDO (1)
- BERTRAM (1)
- BESCHLAGWAGEN KOMMISONIERUNG (1)
- BEZOMBES (1)
- BI-MATIC (1)
- Biesse (8)
- BISON (1)
- BLUM (1)
- BLüMLINGER (1)
- Boere (7)
- Bohm und Kruse (2)
- BOSCH (1)
- BOSITICH (1)
- BOY (3)
- BRANDT (26)
- BRAUN (1)
- BRENTA (1)
- BROTHER (3)
- BRUECK (4)
- BRUKS (3)
- BRUKS-KLöCKNER (1)
- BUHLER (1)
- BURNERD (1)
- BUSELLATO (2)
- CABO (1)
- CALZONI / SPERRY VICKERS (1)
- CAMAM (4)
- Cambio (2)
- CASADEI (5)
- CASATI MACCHINE (1)
- Casolin (4)
- CAT BLOWER (1)
- CATTINAIR (1)
- CAUL (3)
- CEFLA (1)
- Cehisa (2)
- Celaschi (2)
- CENTAURO (5)
- CERAMETAL (1)
- CERVIA (1)
- CICAR (1)
- CIT-MECCANICA (1)
- CKM (1)
- CLAAS (1)
- CMC (1)
- CML (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- COLAR (1)
- Colombo (2)
- COMAFER (1)
- COMEC (4)
- COMEVA (1)
- CONSTANT PHILIPS (1)
- CONTIMAC (1)
- ... more
Manufacturer:
(Category: 209)
New in: 1996
used
An edge banding line including feeding, turning device and an automatic drilling machine is available. The longitudinal machine enables the processing of thick edges and is equipped with new units and controls. The transverse machine can only process thin edges as there is no coupling unit. The machine was operated at up to 28 cycles per minute. Control system: Imatronic 150, documentation is available. Control system: Imatronic 150, including spare parts and tools. Documentation is available.
New in: 1993
used
X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t. ... more information
New in: 1979
used
Power: 11kW, rotational speed: 1450/min. ... more information
New in: 2001
used
Length: 11,250mm, width: 5250mm, height: 2600mm. ... more information
New in: 2002
used
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW. ... more information
New in: 1998
used
New in: 2000
used
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information
New in: 2002
used
Current: 50A, nominal voltage: 400V. ... more information
New in: 2001
used
Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information
New in: 1999
used
With feeder and destacker Wemhöner 184. ... more information
New in: 2002
used
Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. ... more information
New in: 2000
used
Table dimensions: 10,140x2240mm, milling/ drilling aggregate rotational speed: 5000-30.000/ 2100-8000/min, controls: SIEMENS SINUMERIK 840D, operational hours counter: 48,740h. ... more information
New in: 2012
used
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible. ... more information
New in: 1989
used
With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible. ... more information
New in: 2014
used
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h. ... more information
New in: 2009
used
Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023. ... more information
New in: 2021
used
Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. ... more information
New in: 1993
used
The machine cannot be started up at the moment, it will probably be the memory batteries of the control, including replacement control with display, an inspection is possible. ... more information
New in: 2006
used
An inspection is possible. ... more information
New in: 1997
used
Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. ... more information