Manufacturer:
(Category: 209)
Description: • Lot of 4 UPS • Input: 220V 50Hz 4A • Output: 220V 50Hz 4.50AApprox. Onsite Dimension. (l x w x h): 700 x 500 x 400 mm, weight approx.: 40 kg ... more information
Description: • Lot of machine belts • Approximately 80 units of various types and sizesApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 50 kg ... more information
Equipment: - Extinguishing device with drop flap and oxygen deprivation - IE5 high-efficiency reluctance motor with FU control - 7" color touch panel -Auto. Start-stop control for up to 8 woodworking machines - H3 tested - Suction nozzle on the front left, center - JET filter regeneration - 3 dust bins, each 0.16 m³, for chip bags, with swivel castors and viewing window Specifications: - Nominal volume flow: 8,647 m³/h - Nominal volume flow vacuum: 3,293 Pa - Suction side connection Ø: 350 mm - Filter area 38.0 m² - Filter regeneration autom. by compressed air, compressed air consumption per cycle 560 Nltr. - Operating mode: Continuous operation - Type of current: 400 V / 50 Hz - Motor power: 11 kW - Nominal speed: 3,000 rpm - Rated current: 24.5 A - Fan/Drive: IE5, FU-controlled, high-efficiency reluctance motor - Noise level according to EN11201: 72-74 dB(A ...
Description: 7 pieces Completely equipped with toolsApprox. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 10 kg ... more information
Description: Length: 160 cm Width: 85 cm Height: 155 cm Weight: 390 kg Equipped with a heat recovery unit Fan 230 v single-phase, 250 w Power: 60000 K/cal Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 1,600 x 850 x 1,550 mm, weight approx.: 400 kg ... more information
Description: 10 pieces mostly unusedApprox. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 1,300 mm, weight approx.: 300 kg ... more information
Description: Racks with contents Composed by 3 shelves of 1840 x 920 x 2000 mm. Includes light bulbs, electrical spare parts, electrical plugs, among many others See photos for more informationApprox. Onsite Dimension. (l x w x h): 5,520 x 920 x 2,000 mm, weight approx.: 1,200 kg ... more information
Description: Racks with contents Composed by 3 shelves of 1840 x 920 x 2000 mm. Includes light bulbs, screws, electrical plugs, among many others See photos for more informationApprox. Onsite Dimension. (l x w x h): 5,520 x 920 x 2,000 mm, weight approx.: 1,200 kg ... more information
Description: Electrical spare parts cabinet Cabinet with pull-out drawers Dimensions of cabinet: 1210 x 1040 x 2000 mm Contents included! See photos for more informationApprox. Onsite Dimension. (l x w x h): 1,210 x 1,040 x 2,000 mm, weight approx.: 300 kg ... more information
Description: OTTO JUNKER oven spare parts Dimensions of the racks: 1840 x 930 x 2000 Includes Schneider drives, thermal magnets, a HOMA high current switch, among others. See photos for more informationApprox. Onsite Dimension. (l x w x h): 3,700 x 930 x 2,000 mm, weight approx.: 1,000 kg ... more information
Description: Lot of spare springs for sand reclaimer Springs of different diameters, lengths and thicknesses. See photos for more informationApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 520 mm, weight approx.: 120 kg ... more information
Description: Set of spare parts for IMF mixing machines. Consisting of mixer blades and flexitube rolls. Blades dimensions: 60 x 35 mm Length of the rods: 255 mmApprox. Onsite Dimension. (l x w x h): 1,270 x 1,500 x 880 mm, weight approx.: 500 kg ... more information
Description: power 4 kW , suction wall size 3000 x 1400 mmApprox. Onsite Dimension. (l x w x h): 3,200 x 1,100 x 2,200 mm, weight approx.: 100 kg ... more information
Description: For milling tools diameter 16 mmApprox. Onsite Dimension. (l x w x h): 2,000 x 500 x 500 mm, weight approx.: 30 kg ... more information
Foil cutting machine Josting Type: FS 1500 Machine No. 112 Roll width max. 1480 mm Roll diameter max. approx. 500 mm Clamping cones for sleeve inner diameter 150 mm Cutting length (millimetre gradation) 0 – 9999 mm Quantity 0 - 9999 Feed speed adjustable approx. 20 m/min. Electrical connection 1.3 kW Base area (without side table) 2150 x 1730 mm, height 1100 mm Net weight 510 kg
Description: Serial number 1290 , Voltage 230 V Frequency 50 to 60 Hz , Power max. 1000 VAApprox. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,700 mm, weight approx.: 200 kg ... more information
Radial fan, chip extraction fan, fan, extraction, chip blower -Engine power: 30 kW -Speed: rpm -Volume flow: 16600 m³/h -Total pressure: 3200 Pa -Connection input: Ø 400 mm -Connection output: Ø 410 mm -Dimensions: 1500/1530/H1720 mm -Weight: 662 kg ... more information
Description: Swivelling extraction arm, wall-mounted extraction system with sliderApprox. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,000 mm, weight approx.: 150 kg ... more information
Description: Set for moulding machines , Never used ,Approx. Onsite Dimension. (l x w x h): 280 x 210 x 110 mm, weight approx.: 5 kg ... more information
Description: 1 bag Extraction system  ,bunker Ø: 500 mm, Approx. Onsite Dimension. (l x w x h): 1,150 x 650 x 1,900 mm, weight approx.: 20 kg ... more information