peripheral equipment (e.g. heating, conveying, drying) used for sale

Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution  ... more information

SPECIFICATIONS: Hopper size mm: 1600 x 1400 Rotor length mm: 1400 Installed capacity KW: 37.0 Capacity per hour: 700/1000 Kg Screen diameter mm: 16 Hydraulic operation Application Refiner  ... more information

The pass-through dryer is operational, the fans have been replaced with energy-saving ones.  ... more information

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989  ... more information

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513  ... more information

I am selling a complete extraction system LICHT-LOYDL 4x fan 11kW Combined capacity 50,000 m3 / hr. Recuperation system Full system of pipes, flaps and safety elements included. Built in 1995 Available only as a complete version. Already dismantled.  ... more information

I sell the vacuum wood dryer ISVE for about 5m3 of wood. Chamber Long 6m x Dia. 1,60m Trolley system. Wagon and plate condition very good ! Door to one side. Condition very good, worked very little Trolleys, plates and fans without any problems. Available soon.  ... more information

table length: 1300 mmtable width: 800 mmstroke height: 1015 mmweight max. in kg: 3000 kg: 220 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type AG-1 Voltage 380 V (50 Hz) Number of revolutions 3000 r/min Water output 12 ltr/h Engine power 0.55 kW Transport dimensions 650x650x400 mm Weight 14 kg Price 250 Eur (EXW Jonava, Lithuania)  ... more information

Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: mororic; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dedusters have been developed for the extraction of wood chips, wood dust and related substances, but also for various plastics, dry aluminium chips and paper dusts.Advantages

Suction nozzle diameter: 160mm; maximum volume flow: 2000 m³/h; Nominal volume flow: 1448 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 3000 pa; Filter area: 10.5 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 64 db; Scout bag volume: 160 l; Filter cleaning: mororic; Motor power: 3 kW; Machine length: 1800 mm; Machine width: 820 mm; Machine height: 2220 mm; Weight: 320 kg; The Riedex vacuum dedusters have been developed for the extraction of wood chips, wood dust and related substances, but also for various plastics, dry aluminium chips and paper dusts.Advantages

intake connection: 200mm; Maximum volume flow: 1770 m³/h; nominal volume flow: 2780 m³/h; Vacuum: 1580 pa; filter area: 13 m²; filter regeneration: pneumatisch; chip bag volume: ca. 380l; motor power: 3 kW; machine length: 2000 mm; machine width: 800 mm; machine height: 2200 mm; weight: 240 kg; The deduster is suitable for extracting dry wood dustand dry wood chips on individual dust sources. this is also validfor oak and beech wood dust. Furthermore, metallic, ceramicmixed, organic dusts of the dust ex plo sions class St1 and St2be sucked off.If the dust extractor is properly handled by a woodworkingmachine with a dust source (eg circular saw, milling machine, planermachine, belt grinder) and locked in accordance with the rulesoperated, is the necessary extraction performance and separation qualityalways guaranteed.When extracting a dust-proofed woodworking machine wit ...

Sawn timber sorting and packaging line 2.90-5.20m Sequence description Dispensed Home & Dispensers Side goods are collected separately by means of conveyor belts into two stacks on top of each other. The storage tanks are emptied via the separation conveyor to the board feeder and board turner. At the Zuteil-u. The operator is located at the turning station, who is responsible for monitoring and assessing the quality of the boards. All boards are inspected from two sides and then electronically measured, this is done according to length, width, thickness and thickness. Quality in transverse transport. About the Wende-u. The cut goods are sent to the sorting conveyor, after which they are sorted into the 30 boxes At the end, stray sorting conveyors are transported away by conveyor belt. The belt boxes are emptied by lowering and disengaging the belts. Subsequently, the respectiv ...

Cellar Extraction blowers 1.8kW  ... more information

Keller SMM 016,0 Extraction blowers Diameter 160/160mm Air flow rate 1200 Nm³/h 1.5kW  ... more information

Used Heating Stove Int. Art. Ref. m3502 Manufacturer: Spänex Type: UL 39 RW Year of construction 1996 Power 45 kW Total weight approx. 650 kg Firebricks are good. Location: 59425 Unna The machine is welcome to be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on you ...

intake connection: 300 mm; exhaust connection: 300 mm; air flow: 6900 m³/h; motor power: 5,5 kW; weight: 100 kg; Very stable blower with steel impeller. ... more information

SPECIFICATIONS: Extraction system for wood chips Volume flow: 14,000 m³/h Number of cotton filter bags: 80 - Ø mm 200 Height mm: 2800 Fan with KW 15.0 Screw conveyor of KW 4.0 Complete with: -Piping -Switchboard  ... more information

Power: 650 Watttank capacity: 5,5 llength: 515 mmwidth: 430 mmheight: 825 mmweight of the machine ca.: 36 KgProfessional 650 watt construction dryerRecommended room size 40 - 50 m², height max. 2.6 mSound pressure level approx. 52dBDehumidification capacity 28 L/D - 51 L/DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Filter station for wood chips Air flow rate: 7,500 m3/h Number of cotton filter bags: 48 - Ø mm 200 Height mm: 2500 6 bags: diameter mm 500 6 Atex panels 1 vibrator for vibrating hoses KW 11.0 Fan Complete with: - Inspection door - External staircase - Filter room -Piping