miscellaneous used for sale

Description: Make number: 8006 Total drive power: 2.2 kWApprox. Onsite Dimension. (l x w x h): 1,100 x 600 x 1,000 mm, weight approx.: 100 kg ... more information

Description: Diameter: 1200 mm Incl. batch of trovalizing stonesApprox. Onsite Dimension. (l x w x h): 1,400 x 1,300 x 1,500 mm, weight approx.: 700 kg ... more information

Article number: 27-06-007 Manufacturer: Kelch Very good general condition Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 600x400x600mm Weight: approx. 40kg Suitable for: storage of tool holders / SK 40 Other accessories on request Price and other technical data on request

Bucket wheel with worm coils Manufacturer: Stichweh Type 60/80 F8 Year of construction 1990 (1998) Wheel diameter approx, 3000 mm Wheel width 900 mm Drive 4 KW Weight 9000 kg  ... more information

Description: Power 1000 W, on rollersApprox. Onsite Dimension. (l x w x h): 600 x 600 x 1,000 mm, weight approx.: 15 kg ... more information

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Description: Max. load capacity: 750 kgApprox. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm, weight approx.: 150 kg ... more information

with FUNKE heat exchanger TDW 2490-0 ... more information

Emergency generator Equipment-No. 1000804494 Manufacturer: IVECO Type designation: 8361 SRJ 2605 Manufacturer part no.: 018262 Year of construction: 1993 Output AC voltage: 230V / 400V Type of installation: encapsulated Type of technique: water-cooled contractual. Power supply: 160 kVA Fuel capacity: 2,000 l Soundproofing cladding: 230 V / 400 V The unit is disassembled and prepared for transport. Price: € 11,500.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Description: Fabrication number 17836Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,000 mm, weight approx.: 30 kg ... more information

1 Loos steam boiler Type AW1-1 No. 53658/1 Capacity 10 to steam with 20 bar Up to 235 °C, 385 kW Year of construction 1991 With Weißhaupt burner machine with EL heating oil and gas firing Type RGL 70/1 A, Catergorie J Fabr. No. 3626804 Year of construction 1991 1 Loos steam boiler Type AW1-1 No. 53658/1 Power 10 to steam with 20 bar Up to 235°C, 385 kW Year of construction 1991 With white head burner machine with EL heating oil and gas firing Type RGL 70/1 A, category J No. 3626804 Year of construction 1991

This WICKERT WKP 2000/5/5 Other (IMM) machine was manufactured in the year 1993 in Germany. It is equipped with a Siemens PLC S5-100 U control unit. The machine disposes of a display control OP 396, an upper hydraulic lifting unit, a heating rod group monitoring, an automatic discharge device for FT1, an extended protective grid system and an additional tool temperature display.

1 Wulf steam boiler system Manufacture No. 3813 Year of construction 1993 Power: 8 to Damph per hour Up to 13 bar vapour pressure with laterally mounted steam pipe register with Weißhaupt Combi burner for gas and light oil with lying boiler feed water tank Capacity 8,000 l with all-round piping and Structural steelwork with steel fireplace with exhaust gas heat recovery register system with Wulf Elektro control cabinet 1 Wulf steam boiler system Manufacturing No. 3813 Year of construction 1993 Output: 8 to steam per hour Up to 13 bar steam pressure with laterally attached steam pipe register with Weißhaupt Combi burner for gas and light oil with horizontal boiler feed water tank Contents 8,000 l with all-round piping and steel construction with steel chimney with exhaust heat recovery register system with Wulf electrical control cabinet

Brand: Kroll, Registration no.: D/NRW/0002-01(A), Manufacturer No. 35504, Year of construction: 1994, Permissible operating overpressure: -1/0.5 bar, Test overpressure: 4.0 bar, Calculated temperature: -20/50 degrees C, Total capacity: 12000 litres., Terms of delivery: EXW Germany, fire: Kroll, Registration no.: D/NRW/0002-01(A), Year of construction: 1994, Permissible operating overpressure: -1/0.5bar, Test overpressure: 4.0 bar, Calculated temperature: -20/50 degrees C, Total capacity: 12000 liters., Terms of delivery: EXW Germany

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Description: Fabrication number: U93105 Max. load capacity: 1250 kg Test load: 1875 kgApprox. Onsite Dimension. (l x w x h): 600 x 600 x 500 mm, weight approx.: 130 kg ... more information

Ref.-No. 00579 Z1 Description Used intensive mixer Manufacturer Eirich Type R08 Built in 1995 maximum filling 60l / 90kg Industry 7322 Granulating zinc oxide dust Control Not available Machine description - R08 (mixed material temp. max. 80°C) - Star-tangle tool; 4-stage; Li.-Run - Wirbler drive power: 5.5kW - Wirbler drive speed: 1000 rpm - Wirbler rotation direction: Left-hand run - Wirbler speed: 340 rpm - Wirbler circumference speed: 6.2m/s - Wirbler drive type: V-belt - Mixing container drive: friction wheel Type of wear - mixing container with soil wear segments + Wear wall - Star-wire tool with armor - Wall scrapers with armor Accessories - Storage vessel V=115l with Ebro shut-off valve DN200 and Vibration motor - Ebro shut-off valve DN150 on mixing container cover mounted (transition) - Dosing conveyor screw for zinc oxide filter dust, incline  ...