pharmaceuticals and cosmetics machines used for sale

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

• Permissible load 1,500 kg • Mixing blades in container lid • Chopper unit, removable • Ceiling bearing • Light curtain • Approach station for containers • PLC Siemens S7-300 CPU 313C • Danfoss servo inverter • HMI Siemens Touch Panel • Project management • Printer • 4 Bohle MCG 1600 mixing containers (photo shows MCG 1200, not supplied) • Jungheinrich EJC 210 container pallet truck, rated load capacity 1,000 kg • Container floor scale Bizerba with printer, weighing range 10.0 -1,500.0 kg • Drive 400/24V/50Hz/8.75KW • Possibly with qualification documentation • Only 712 operating hours! • The mixer is ready for operation in a pharmaceutical company in northern Germany and can be inspected there by arrangement. Available from week 32/2024

• Air-condensed water recooler • Nominal cooling capacity 1920 W • Thermoregulator from +15° to +27°C • Flow rate 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R404A • Mobile • Drive 230V/50-60Hz ... more information

• Air-condensed water recooler • Nominal cooling capacity 1920 W • Thermoregulator from +15° to +27 • Flow rate 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R404A • Mobile • Drive 230V/50-60Hz ... more information

• Automatic/semi-automatic operation • Running direction from right to left • Packaging dimensions max. (w x l x h) 380 x 600 x 160 mm • Film width max. 550 mm • Film roll diam. max. 300 mm, core Ø 77 mm • Film thickness 15-50 ym • Sealing temperature 0-230°C • Rewinding of residual film • Shrink tunnel • Powered outfeed belt with sluice • Mobile on rollers • Foot switch • 7 pcs. unused film roll • Switch control • Drive 380V/50/60Hz

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Barcode reading leaflet • Ejection of bad leaflet with ejection counter-check • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

• Carton sealer for upper carton flaps with C-strip • Output max. 1,200 cartons/h • Carton dimensions (W x L x H) 150-500 x 200-600 x 100-600 mm • Sealing unit K11R for tape width 50 mm, roll diam. max. 410 mm, core diam. 76 mm • Lateral conveyor belts • Manual adjustment of carton size • Automatic folding device for upper carton flaps • PLC Siemens S7-1211C • Height adjustable • Drive 380/415V/50Hz

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

• For the packaging of products in three-side sealed tubular bags made of half-tubular films (PP, PE, PVC). • Output max. 40 products/min • Product sizes min. (l x x h) 100 x 50 x 10 mm, product length unlimited • Infeed conveyor w 350 mm, l 2,000 mm • Welding width max. 380 mm • Infeed height max. 200 mm • Film width max. 550 mm • Foil roll diam. max. 350 mm • Film thickness 15-50 ym • Longitudinal and transverse sealing • Residual film rewinder • Print mark control • Perforating unit • Automatic operation via light barriers • PLC Siemens S5-100 CPU 103 • Lauer control panel • Drive 400V/50Hz/6kW • 2 spare welding bars • Shrink tunnel SC 4030 SD • Throughput width 450 mm, throughput height 300 mm • Roller conveyor, bars adjustable rotating/non-rotating • 2 heater fans • power 18 kW, contactor control

Automatic filling line for small to medium batches of vials, ampoules, tubes in frames or trays, consisting of X, Y-filling robot and peristaltic pump: X,Y-filling robot with 1 filling station: • Filling area width max. 555 mm, depth max. 345 mm • X, Y positioning max. +/- 0.5 mm • Object height max. 250 mm • Operating system Windows XP Professional Peristaltic pump: • Accuracy +/- 0.5 • 2 pump speeds 72+225 rpm • Dosing 0.5-1000 ml depending on tube-diam. • Flow rates 2.1-40.7 ml/sec depending on tube-diam. • Tubing diam. 3, 5, 8 mm • Manual or automatic mode • Delay in automatic mode 0.5-9.5 sec in 0.5 sec steps • Recirculation to dispensing vessel • With keyboard and mouse, without monitor, without undertable • Drive 240V/50/60Hz

• Drive MCP-Process (ISM915) • Speeds 1-240 rpm, accuracy 0.1 rpm • Protection class IP 65 • 1-channel pump head Pro-380 (ISM791) with 3 stainless steel rollers • Pump head removable for cleaning • Flow rate 0.45-3,400 l/min depending on hose dimension • For tubing thickness 1.6 mm • For hose inner Ø 1.6-11.1 mm • 3 interfaces (analogue, 2x RS 232) • Drive 85-264V/47-60Hz • Last maintenance 11/2021

• Semi-automatic filler for manual object feeding • Single dosing via foot switch or continuous operation after pressing the foot switch once • Number of cycles infinitely variable max. 2,200 fillings/h • Filling range 0.2-125 ml depending on pump • 1 rotary piston pump filling range 1-10 ml with filling needle • Suction pressureless • Preset counter • Filling volume coarse and fine adjustment • Without foot switch, object contact prism, filling needle holder and lower table • Switch control • Drive 230V/50Hz

• Load capacity 110 kg • Drum holder for drums Ø 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230 V ... more information

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

• Air-condensed water recooler • Nominal cooling capacity 2700 W • Thermoregulator from +15° to +27 • Volume flow 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R407C • Mobile • Drive 230V/50-60Hz ... more information

• Semi-automatic filler for manual object feeding • Single dosing via foot switch or continuous operation after pressing the foot switch once • Number of cycles infinitely variable max. 2,200 fillings/h • Filling range 0.2-125 ml depending on pump • 1 rotary piston pump filling range 1-10 ml with filling needle • Suction pressureless • Preset counter • Filling volume coarse and fine adjustment • Without foot switch, object contact prism, filling needle holder and lower table • Switch control • Drive 230V/50Hz

• Air-condensed water recooler • Nominal cooling capacity 2700 W • Thermoregulator from +15° to +27 • Flow rate 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R407C • Mobile • Drive 230V/50-60Hz ... more information

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

• Equipped for toploader boxes • Output max. 20 cartons/min • Blank magazine • Blank transport • Gluing station with 2 glue nozzles for side flaps with Robatec Concept 4 hotmelt gluer • Folding station with folding stamp • Carton discharge with outfeed conveyor • Vacuum generation with Venturi nozzles • Touch screen Siemens Pro-Face • Elau Pac-Drive control with 1x Max-4 and 4x MC-4 • 4 formats for toploader cartons: • Blanks: 225x204, 284x263, 284x348, 397x458 mm • Ready glued WxDxH in throughfeed direction: 70x95x35, 70x95x65 mm and 70x182x65mm, 70x182x120 mm, other formats possible • Drive 24/400V/50Hz • Qualification documentation (IQ/OQ)

• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz