beverage machines used for sale

Overview This 5 HL brewing equipment was built in 2022 by Polish manufacturer Minibrowary. It was only installed and dismantled in the same month. Equipment Brew kettle/mash tun Vertical tank working capacity of 5 hl, mounted on three supports welded to the cylindrical part supports have adjustable feet with a height adjustment of up to 60 mm, allowing for the leveling of the tank. cylindrical tank is entirely made of stainless steel The brew kettle also serves as a mash tun. The purpose of mashing is to dissolve soluble compounds of malt in water and enzymatically break down starch, proteins, and other compounds. Vessel is equipped with a steam heating system, stirrer, and sensor. The mashing temperature is appropriately regulated. It is possible to carry out mashing using infusion and decoction methods. Equipment of the Tank Two-level stirrer Gearmotor 60 rpm with variable speed contro ...

Filter Seitz Orion, diversion chamber 40 x 40More then 300 machines new and second hand on our seema .de ... more information

Boge Refrigeration Compresssed Air Dryer DB 225Automatic Working , Ready to UsePressure MAX:    16barAir Volume/Min:    22,50m3/minMotor:               2.95kwElectric Power:        400v/ 50HzAir Plug Size:         2 1/2More then 300 machines new and second hand on our seema .de

- Capacity: approx. 4,000 bottles/hour,- corking heads: 4,- very good condition,- format parts for many bottles available,- Working direction: left / right.More then 300 machines new and second hand on our seema .de ... more information

6 valve row fillerMore then 300 machines new and second hand on our seema .de ... more information

1 of used beverage processor, make Krones, capacity 14.950 lph. New 2001. With Anton Paar Carbo 2000 CO2 analyzer. Available for immediate delivery.  ... more information

1 of used liquid nitrogen dosing system, make VBC Vacuum Barrier Corporation, type Nitrodose G2 Pro. Used in a 60.000 cph canning line.  ... more information

1 of used trayshrinkpacker, make KHS/Kisters, type TSP050, new 2001. Siemens S7 controls. Last used for 53 mm Slim cans.  ... more information

1 of used film-only shrinkwrapper, make Kisters (KHS), new 2001, capacity upto. 50 cycles/minute. Last used for 53 mm Slim cans. Siemens S7 controls.  ... more information

1 of used semi-automatic lid feeder, make CSW, type MF 54-10 Multifeeder with RotoBuffer, new 2015. Used for type 200 lids in a 60.000 cph canning line. Available for immediate delivery.  ... more information

1 of used tunnel pasteurizer, make SMB, new 2001. Double-deck, stainless steel (welded) with plastic mat-top chains. Last used for 150/200/250 ml slim cans of beer, fruit-juice and soft-drinks including energy drinks at a speed of upto 60.000 cph, Siemens S5 controls.  ... more information

1 of used 72-valve can filler make Krones, type VOC Volumetic, with Ferrum F708NG, both new 2001. With tooling for 150/200/250 ml type 202/200 slim cans, capacity upto 60.000 cph. Originally supplied to fill beer, fruit juice (with pulp) and soft-drinks including energy drinks. Available for immediate delivery. CSW lid feeder, Krones beverage processor, VBS nitrogen dosing system, SMB tunnel pasteurizer, KHS film-only multi-packer and trayshrinkpacker, etc. optionally available.

Palletizer (sliding plate) for boxes, cartons and bagged goods. Very good condition Incl. carton feeder for pallet, cover sheet applicator, wrapper and pallet transport. Available from September 2024, until then the machine can be viewed in operation. Complies with the current safety standard.

Complete bottling line for beer up to 8,000 bph incl. palletizing for NRW 0.5 l Available from winter 2024/2025 The plant can be visited during operation  ... more information

Blender Famix / Germany 2 Boiler unit Output max. 4000L ready-to-drink per hour Further information and price on request  ... more information

Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor   

Overview The palletizer was built in 2015 by Italian manufacturer FMT. It is complemented by a pallet winder which was built in 2018 by Italian manufacturer Atlanta. The machines are in good condition, have already been professionally dismantled and stored in a warehouse. Techn. Details Palettiser | FMT | Antares | 2015 Capacity: up to 20.000 bph For pallets 1.200 x 1.000 (Euro-pallets) and also half pallets Single lane infeed, Driveway with brushless motorized dosing belt Automatic layer-pad deposit system with floor-mounted storage unit Empty pallets storage unit Pallets handling on belt conveyors Siemens Sinamics motor drives (profibus) Siemens ET200S machine drive Pallet winder | ATLANTA | - | 2018 Capacity: up to 20.000 bph For wrapping pallets 1.200 x 1.000 (Euro-Pallets) and half pallets with shrinkable PE film With rotary table suitable for wrapping pallets   Motorization and C ...

Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible

Overview The Triblock consists of a rinser, filler and capper and was manufactured by the German OEM KHS in 1999. It is an isobaric machine for the production of sparkling water. Recently, till dismantling it was used in a mineral water company in France. Techn. Details Capacity: 16.000 bph refer to 1,5l 24.000 bph refer to 0,25l /0,5l Worked formats: 0,25l 0,5l 1,0l 1,5l Cap type: 28mm plastic screw cap Number of rinser stations: 50 Number of filling valves: 60 Number of capping stations (Zalkin capper): 10 Pitch: 113mm Rinsing machine with one channel 56,000 operating hours spare parts included air conveyors, 20m included bottle conveyors, 15m included working direction: clockwise

Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request