Manufacturer:
(Category: 1409)
Centrifugal pump, CRI5-2A-CA-I-E-HQQE, 9/14,3m, 5,8m³ Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, ...
Centrifugal pump, CRN10-02 A-P-G-V-HQQV, 20,2m, 10m3/h, Grundfos, used - overhauled Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used and overhauled! The part was bought from a spare parts store of a company, was overhauled by a specialised company and is in a very good condition and fully functional. Vertical, multistage centrifugal, Booster pump. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,75 KW, H: 15,3m, Hmax: 20,2m, Q: 10m³/h 260 x 200 x 590mm hoch, 31kg, Function guarantee for used goods! For used goods, we can not provide a conventional warranty and warranty. Since we know that the device works, we give you a functional guarantee ...
Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.
Centrifugal pump Manufacturer: Hilge Type Hygiana Bloc II/4A Serial number 02/99/25249 Flow rate 15 m³ Delivery altitude 100 m Power: 11.0 kW Speed 2,900 rpm Inlet DN 50 Outlet DN 40 Year of construction: 1999 ... more information
EQUIPMENT: acid-resistant impeller and housing Manufacturer: STORK Pumpen Type: FRER 80-140 Dimensions: 1000 x 400 x 550 mm Blunt: DN80; DN80 Voltage: 400 V Power: 5.5 kW ... more information
Speed adjustable with frequency converter, Housing and impeller made of cast steel. In mint condition, little used. Manufacturer: GRUNDFOS Type: TPE 100-390/2 A-F-A-BAQE-QX1 Article number: 96110285 Nominal flow rate: 171 m³/h Nominal pressure: 16 bar Nominal transport height: 34 m Mounting length: 550 mm Engine power: 22 kW
Busch claw vacuum pump Mink MM 1252 AV with 4.5 KW AC-motor, 250 m3/h, final pressure - 0.06 bar, completely overhauled with all wearing parts, 1 year warranty ... more information
Compressed air-operated double diaphragm pump of the EXP Bfkqxxxa38 Series Max flow rate 220.6 l/min Max air input pressure 8.3 bar Max material input pressure 0.69 bar Max compression pressure 8.3 bar Max particle size 3.2 mm 2 pieces available - as good as new ... more information
Verderair VA 25 maximum air input pressure 8.4 bar Bfkq7m7lzr max. operating overpressure 8.4 bar ... more information
Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but showing slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's specifications for technical data:Hydraulic dataMinimum Efficiency Index (MEI)0.4Minimum. Liquid temperature T min-20 °CMax. Liquid temperature T max140 °CMax. Ambient temperature T max40 °CMaximal operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWBrated current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87.6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kWMotor winding from 4 kW insulation classFSuity motorIP55 ...
Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall size: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity is reliant on viscosityn ... more information
Pump for liquid / viscous media This promoted tough flowing latex over greater distances. Pump must be cleaned inside once, but then again full Einsatzbreit. ... more information
Seitz BERNINA - SA 3 stainless steel transfer pump, mobile on trolley. ... more information
Height=0.41 m, Overall length= 1.03 m, Overall width= 0.43 m, Net weight= 175 kg, ... more information
Frequency controlled pump, TPE2 80-180 N-A-F-A-BQQE, Grundfos, new -30% - Single-stage inline pump (glanded pump) with speed-controlled, fan-cooled permanent magnet synchronous motor, - 50.5 m³/h, 360 - 4000 rpm, 2.2 KW, 12.8/18m, DN80, 10bar, 3x380-500V, - Grundfos 98437605, control panel HMI 200 standard, function module FM 300 - Frequency converter MGE90LD 2-56C-IA For air conditioning of commercial buildings, heating for commercial buildings Hot water circulation in commercial properties and much more. Special price ! The current new price of a similar product is € 4.800 excl. VAT. We still have several identical pumps, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a co ...
KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!
High pressure pump with a 12 bar President Graco. Model 210-007 To the funding of almost all media. Beam of 3cm to 20m possible, very powerful. Have 2 pieces. ... more information
ABEL water high pressure pump VO - 0215 45 kW, 450 1 / min, 315 bar, Q 180, H 1000, N 62 The pump is dismantled and should be overhauled. A set of all wearing parts in new is available and can be purchased with. Length 160 cm, height 70 cm, depth 70 cm. Weight ca. 500 kg â?¬500 Site 76829 Landau Shipping via forwarding only possible and pick-up preferred, forklifts to load up there.
Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!
Immersion pump, TG 50 20/40 840, 4KW, max19m, max70m³/h, Knoll, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - 4,0 KW - Hmax 19m - Qmax 1160 L / min or 70m³/h, - 400 V - 50 Hz - 2900 rpm - Immersion pump, cooling lubricant pump - Immersion depth 108 cm - approx. 100kg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 1 month after purchase you can return the goods and we will refund the purchase price.