planing machines used for sale

Description: Planing width 530 mm, table length 2300 mm, thicknessing table length 920 mm, planing shaft diameter 120 mm, knife 4, without documentation and CE certificateApprox. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 1,200 mm, weight approx.: 1,100 kg ... more information

A combined Kölle HK 63 planer is sold. Gearbox was completely disassembled, cleaned, greased and adjusted. Both shaft bearings completely replaced. Thickness table adjusted to approx. 0.01 mm. Dressing tables were set parallel to each other. The feed and pull-out rollers as well as the pressure beam have been perfectly adjusted, so that there is no planing impact. Newly painted Ready for immediate use Dimensions approx. 210x120cm Planing width 63cm Planing height 22cm 4 Knife Shaft Strip Plane Knife 2 sliding rollers in the table 2 feed speeds Toothed Steel Feed Roller Steel Pull-Out Roller Loading facility available Price is gross (total price) VAT not deductible (margin scheme) The machine can and should be viewed and tried out on site, as a return and warranty are excluded. You can find our terms and conditions on our websit ...

Description: Total processed length: 205,152 m Operating voltage 400 V Frequency 50 Hz Working width min. 10 mm (with tool diameter 125 mm) Workpiece width after processing min. 10 mm and max. 250 mm Working height min. 10 mm (for tool diameter 125 mm) Workpiece height after processing min. 10 mm and max. 160 mm Control: powerControl with Powertouch MOULDTEQ M-300 Feed: Feed system - 6 spindles Feed speed 24 m/min infinitely adjustable via powerTouch Feed speed min. 6 m/min and max. 24 m/min Maximum tool weight 22 kg with CE certificate and documentation without tools1. spindle: 7.5 kW, 2. spindle: 7.5 kW, 3. spindle: 7.5 kW, 4. spindle: 7.5 kW, 5. spindle: 7.5 kW, 6. spindle: 7.5 kW, serial number: 0-254-11-2760, planing width: 250 mm, planing height: 160 mm, length of surfacing-table: 2,500 mm, number of spindles: 6 pieces, feed: 24 m/min, Approx. Onsite Dimension. (l x w x h): 4,800 x ...

Weinig Unimat PFA 22 planing and moulding machine for four-sided planing and profiling of wood with long planing table, universal spindle and including planing heads and accessories. Special price, including disassembly and loading from the location until May 24, 2024, spindles: 7, working width: 220 mm, working height: 120 mm, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Right, spindle 5: Upstairs, spindle 6: Below, spindle 7: Universal, Tools: Included

High-performance planing system Kupfermühle type K43 with inlet and outlet for planing and beveling boards and beams. Consists of: 1. Semi-automatic inlet roller conveyor, length: 10 m 2. Kupfermühle HOMS 410 planing machine 3. Outlet roller conveyor, length: 10.5 m with pneumatic ejector, Working height four-sided: 250 mm, Working height two-sided: 280 mm, Feed planer: max. 30m/min, spindles: 4 + 2 x bevel, 1. Infeed roller conveyor, length: 10 m, working width: 420 mm

Weinig Profimat 23 planing and moulding machine for four-sided planing and profiling with Weinig EM 11 feed magazine and including extensive accessories and a set of processing tools. The Weinig EM 11 feed magazine can be removed from the offer. Special price, including disassembly and loading from the location., spindles: 5, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, working width: 230 mm, working height: 160 mm, spindle diameter: 35 mm, Dressing table length: 2.000 mm

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation  ... more information

SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5  ... more information

Planing and moulding machine Weinig Unimat 1000 Star for four-sided planing and profiling of wood, with universal spindle, folding device and EM 11 feed magazine. Sample image. Delivery time: on request. Spindle 1: Bottom / 5.5 kW / 40 mm / 6,000 rpm Spindle 2: Right / 11 kW / 40 mm / 8,000 rpm Spindle 3: Left / 11 kW / 40 mm / 8,000 rpm Spindle 4: Right / 11 kW / 40 mm / 8,000 rpm Spindle 5: Top / 15 kW / 40 mm / 8,000 rpm Spindle 6: Bottom / 11 kW / 40 mm / 8,000 rpm Spindle 7: Top / 11 kW / 40 mm / 8,000 rpm Spindle 8: Bottom / 11 kW / 40 mm / 8,000 rpm Spindle 9: Universal / 11 kW / 40 mm / 6,000 rpm, spindles: 9, working width: 230 mm, working height: 120 mm, Driven rollers: 3 in the table, Control: memory system, feed: 5.5 kW / 6 - 36 m/min

Description: Chisel shaft: Helix shaft ø120 mm Chip removal: max. 8 mm main motor: 5.5 kW, serial number: 53,150,900, planing height: 4 - 300 mm, planing width: 530 mm, table length: 1,000 mm, turning speed range: 5,000 rpm, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 1,200 mm, weight approx.: 800 kg

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Vema AHM-51 surface planer or Vema surface planer for smoothing and leveling (surface planing) wood. Incl. Adjustable angle stop., engine: 4 kW, working width: 500 mm, table length: 2.500 mm, dressing stop: Pivotable, Cutter block: Strip planer blade Z4 ... more information

Description: Planing width: approx. 63 mm Thickness passage: up to 220 mm Table dimensions: approx. 2100 x 630 mmApprox. Onsite Dimension. (l x w x h): 2,100 x 700 x 1,000 mm, weight approx.: 1,200 kg ... more information

Description: Serial number: 10404-000243 Rated power: 1500 W Nominal speed: 9000 rpm Table dimensions: 740 x 210 mmApprox. Onsite Dimension. (l x w x h): 780 x 450 x 450 mm, weight approx.: 30 kg ... more information

KUPFERMUHLE four-sided planer with additional table, multi-saw 600x200mm - after technical inspection - German production - DOUBLE-SIDED PLANING HEIGHT 200 mm - ideal for wet wood - electric height adjustment - double feed chain - additional preliminary table with a 340 mm head - additional material feed systems TECHNICAL PARAMETERS: planing width 600 mm cutting height on both sides planing height on four sides 200 mm 100mm power of vertical spindle motors 2 x 5.5 kW lower shaft motor power 7.5 kW upper shaft motor power 11 kW engine power of the first head 4 kW multi-saw engine power 15 kW adjustable vertical heads four upper pulling rollers three lower pulling rollers two receiving pull rollers 4 knives per shaft, shaft diameter 145mm six types of feed speeds 7 / 9 / 11.5 / 14 / 18 / 23 m/min 2 rows of anti-kickback pawls spindle diameter 40 mm disc  ...

Number of spindles: 6 St.Working width: 240 mmWorking height: 120 mmDimensions (L/W/H): 4900 x 1700 x 1700 mmweight of the machine ca.: 3500 kgControl: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts14 axis control with touch screen - WINDOW VERSIONMachine with 6 spindlesSpindle speed 8,300 rpmWorking width 240 mm, working height 120 mmElectronic horizontal and vertical positioning of the spindlesGlazing bead cuttingTouchscreen controlsDetailed technical description, seeadjacent PDF documents.Suction nozzle diameter:1. Spindle down: 120mm2nd spindle right: 120 mm3. Left spindle: 120 mm4. Spindle top: 150mm5. Spindle top: 150mm6. Spindle below: 120mmOption: workpiece return to the operatorImages are from our archive of a machine of the same model.(Technical information according to the manufacturer - without guarantee!)The data for this ad was created with Mod ...

Working width: 410 mmLength of the planing table: 2.600 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2.600 x 1.400 x 1.200 mmweight of the machine ca.: 561 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

Price example : FS310PS - New , carbide planer shaft dia. 75mm, thickness planer height: 5 - 240mm: 1900,- net  ... more information

Working width: 510 mm; Planing height: 250 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display Planing Thickness: Digital Display; Feed speed: 8 / 16; Feed roller: steel; Pressure bar: articulated; Pull-out roller: steel; Table rollers: no; Motor power: 7 kW; Suction port: 120mm; Machine length: 800mm; Machine width: 900 mm; Weight: 650kg;