subcategories
(3rd category level)
Manufacturer:
(Category: 205)
table length: 4000 mmtable width: 3000 mmtable load: 60 ttotal power requirement: 14.3 kWweight of the machine ca.: 48.5 tdimensions of the machine ca.: mBrand: FXType: 83.300/400Used machineDigital readout: Heidenhain ND 780 Table length: 4.000 mmTable width: 3.000 mmTable load: 60 TMovement: 2.000 mmWidth T-slots: 58 mm (M30) mmFeeding: 4 - 1.500 mm/minRapid traverse: 4.000 mm/minPower: 14,3 kWMachine weight: 48.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Machine Specifications: Model: BIESSE ROVER B 4.50 Year of Manufacture: 2006 Operating System: BiesseWorks on Windows XP Number of Axes: 3 X-axis: 5220 mm Y-axis: 1750 mm Z-axis: 225 mm Spindles: 1 Main Motor Power: 12 kW Maximum RPM: 18000 Work Area: Effective Work Area: 6m x 1.3m Workpiece Depth: Adjustable (slightly larger than the nominal depth) Tooling: ISO30 Tool Holder Toolholder Included (Tools not included) Variety of toolholders, including saw aggregate for X, Y, or 45° cuts Tool Magazine: Capacity: 12 positions Table Configuration: 8 Tables 4 Vacuum Blocks per Table Additional Features: Serial Number: 71035 3-Axis Machining Year of Construction: 2006 Air Supply: 7 Bar Mass: 5700 kg Power Supply Voltage: 380 VAC Rated Current: 38 A Number of Power Supply Phases: 3 Power Consumption: 21.1 kW Frequency: 50 Hz BiesseWorks Software Operating Hours: 28 ...
Description: CNC machining centres for milling, drilling and sawing window, door and frame parts and is equipped with: a semi-automatic infeed conveyor and outfeed conveyor as a buffer Two machining units Automated tool magazine Operating system: Nexus Software: Windows NT 4.0 S/N: 107216 Tool spindle 1/2 Holder type: HSK 63 F Direction of rotation: left and right Speed: 0 - 18,000 rpm Power: 10.5 kW Tool magazine Distance between tool stations: 100 mm Number of tool stations per magazine: 15 Tool length from planning HSK 63: max. 290 mm Workpiece Maximum timber/clamp height: 95 mm Minimum timber/clamp height: 15 mm Maximum timber length: 3100 mm Maximum number of parts on input: 21 parts of 56 x 82 mm Maximum number of parts on output: 21 parts Minimum clamping distance between rebates: 10 mm Tools Please note that this machine is supplied without tools serial number: 107,2 ...
Hardware drilling and recessing machine, with multi-spindle headTable mountedMotor 1,1 kWFence left and right, 1,5 m. long ... more information
drilling machinedrilling lines 7 spindlesMotor 1.1 kWFence left and right 1.5 m. ... more information
Description: X stroke: 3390 mm Y stroke: 1850 mm Z stroke: 180 mm - HSK63 electro-spindle - 4 axes - 24-spindle vertical drilling unit - 6 horizontal milling unit - blade groove - 8-beam work surface - pivoting suction cups - work areas - clamps - BIESSE WORKS software and panel optimisation - 12-position tool magazine on Z carriage - Independent blade for grooving in the X axis - Front protection and safety system with belt - Perimeter protection grids - Automatic lubrication system - Air conditioning system for cooling and cleaning the machine control unit - Vacuum pump mc / h 250 - with electrical cabinet - Accessories (32 milling cutters, drills, etc.) Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 13,000 x 2,200 x 2,600 mm, weight approx.: 4,650 kg
ALBERTI 5-axis machining center model POLAR EVOLUTION 3.5 CN: – maximum working range 3500 x 1637 mm – Z-axis stroke 600 mm, thickness machinable on suction cups 160 mm – 2 phenolic resin worktops of 1700 x 1632 mm: for alternating or synchronous machining "vacuum free" type, with holes connected to the vacuum system, NC-controlled zero points and retractable stops, with 12 blocks of suction cups with double vacuum chamber (without hose) Becker vacuum pump + pneumatic clamps for small parts – Automatic lubrication, optimised and centralised suction – electronic control with TPA and ALBATROS software, visualization program in Windows environment, EDI32-TPA EDITOR (CAD-CAM 3D) – machine in compliance with CE standards, with double front concealed barrier (for loading/unloading of the 2 worktops) and perimeter protections – machine di ...
Manufacturer: Biesse 5 Achsmaschine, Type: Arrow FT-5 Achsmaschine, Year: 2007, Control: XP 600, Working range X: 2 X 1600 , Working range Y-axis: 2600, Working range Z: 300, C axis: yes, B-axis: yes, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): ca. 24000, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 3, Number of tables: 2, raster table: yes, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 250, Drill vertical: 3, Saw unit: 120 mm, Portal machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, Zentralschnierung: yes, Available: sofort, FREE TEXT: Wassergekühlte Spindel, Year :2007
Manufacturer: Bürkle, Type: Betonpflasterlackieranlage, Year: 2007, Finished product: Oberflächenbeschichtung, Work piece width min-max mm: 1300, Destacking plant: Vakuum, Inlet conveyor: mit Ausrichstation, 1 UV dryer lamps/Watt: yes, Conveyor belt/roller: Band, 2 paint roller: Bürkle SLC 1300, 2 UV dryer lamps/Watt: yes, wast cleaning: yes, Conveyour system: Band, Stacking plant: yes, Year :2007
Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007 ... more information
Description: HOMAG PROFI BOF311/60/F/KC ,5 axis processing centre • Fully automatic CONSOLES - CLAMPING TABLE KC  ,  ,- 10 clamping consoles with automatic positioning unit  ,  ,- 30 automatically positionable platforms for holding the vacuum clamps  ,  ,- 4 lifting rails attached to the side of the consoles • , ,5 axis main spindle 15 kW liquid cooled.  ,  , - Speed range continuously programmable from 1000 - 24000 rpm. • Drive 5+ unit interface for the use of machining units. , • Drilling head 17 spindles vertical  ,- 1 motor 2,7 kW, frequency controlled Speed max. 7500 1/min  ,- 7 spindles vertical in X-direction  ,- 11 spindles vertical in Y-direction - 4 spindles horizontal drilling and sawing unit • , ,Chain changer for 30 tool / unit positions with upstream double gripper for  ,  , , &nb ...
Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new! ... more information
Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...
Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...
Description: Composed by: ROUTECH OIKOS RT4000 machine body dimensions 7000x2400x4000 mm Automatic loader unit dimensions 12500x4500x2000 mm Automatic unloader unit dimensions 12000x6000x2000 mm Electrical panel REFIND Chiller Paper documentation (manual, electrical diagram, CE certificate) 2 external PCs, one for BTL processing and one for simulation execution (ALPHACAM license not included) Chip discharge roller Composition of the machining center 1x 6-axis head with universal milling cutter/planer 1x 6-axis head with 760 mm blade 12-position tool magazine 1x Mortising head Technical data Maximum working length 14 meters (Used up to 16/18 meters) Workable section 800x300 mmApprox. Onsite Dimension. (l x w x h): 27,000 x 7,000 x 4,000 mm, weight approx.: 1 kg
Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg
Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating system !Replacement of the C-axis - October 2022!working width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x ...
Description: serial number: 0-201-06-0390 Technical specifications: 3 axes + axe 'C' vertical milling motor 7,5kW, HSK F63 drilling head with 11(X) + 6(Y) vertical spindles and 4 horizontal spindles (2 on X axis and 2 on Y axis) tools magazine HSK - 30 positions 8 bridges L=1340 mm, with 16 suction cups 4 pneumatical clamps for fixing narrow pieces 4 loading aids vacuum pump Becker 100 m³/h + vacuum pump 2BL2101 (80m³/h) working table: 4000 x 1300 mm axis travel: X=4900mm Y=1800mm Z=280mm waste disposal belt security belt in front of the machine (3 parts) perimetral protective fence total connection: 17 kW software: woodWOP NC control: power control PC85 CE mark without tools vacuum pump: 100 m³/h, serial number: 0-201-06-0390, toolchanger positions: 30, total electrical load: 17 kW, 5-axis machining: No, Number of vacuum pumps: 2 pieces, Integrated C-axis: Yes, x-motion: 4,900 mm ...
Description: WEEKE - WAMHOFF OPTIMAT VENTURE 1 CNC Machining Centre Travel range X - Y - Z axis: 3860 - 1523 - 185 mm Rapid Traverse speed X- Y - Z axis: 60 - 50 - 15 mm Compresses air required: 7 bar Dust extraction port: 200 mm Electric power - total connection load: 16 kWserial number: 0-250-11-1658, Approx. Onsite Dimension. (l x w x h): 5,800 x 1,600 x 2,000 mm, weight approx.: 4,200 kg
Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007