other wood working machines used for sale

Stencil lathe Manufacturer: Hempel Model: HH 9 Heavy-duty version with oil-hydraulic control Max.: Workpiece length: 900mm Hydraulic sliding supports: 5 pcs.  ... more information

Code: 0126 Brand: MINIMAX SCM Model: T 124 Wood-turning lathe with base for producing columns, furniture parts, etc., for wood, plastics, plaster, marble, etc. Technical data: Max distance between centres mm 1180 Centre height mm 210 Three-phase motor (V. 380) Hp 1,5 Spindle speed rpm 570/1000/1850/2500 Max working diameter mm 420 Rapid tailstock Easy speed change Holder table Suction hood diameter mm 100 Box with n° 5 gouges Overall dimensions mm 1800 x 600 x 1280 h Weight kg 125

Striffler 2400 hardware drill, non-functional, in need of repair  ... more information

Wegoma Feeder including stand  ... more information

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser  ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D  ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produ ...

To sell on behalf of a customer. Delivered by us in 2008, completely overhauled, in operation until 2024. Including various spare parts and complete documentation.  ... more information

Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - Year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

– after technical inspection – very good condition – year of production 1995 TECHNICAL PARAMETERS: turning length max. 1300 mm turning diameter 120 mm three bottom knives five top knives support hydraulic knife control automatic control magazine dimensions of the machine (L/W/H) 380 / 210 / 215 cm weight ~ 3490 kg

- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

– German production –DTR TECHNICAL PARAMETERS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm engine power 37 kW motor power 2 x 2.2 kW number of knives 2 pieces sieve 60 x 60 mm two lower toothed shafts upper toothed shaft tray length 4900 mm wood chip chute with sieve transport dimensions (L/W/H) 850 / 245 / 220 cm weight ~ 2500 kg

– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg

– after technical inspection – very good condition – Austrian production TECHNICAL PARAMETERS: hopper dimensions 120 cm x 100 cm power 2 x 11 kW four shafts rotor length 400 mm rotor diameter 300 mm sieve fi 30 mm autorewers dimensions (L/W/H) 140 / 130 / 200 cm weight 600 kg

– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...

Code: 0195 Brand: FRAMAR Model: MBO-T9 - CE Standard Electronic horizontal chisel mortising machine for slots of different lengths and depths for window, shutter, balcony and door posts - CE Standard Technical data Tool motor power Hp 3 Hydraulic system motor power Hp 0,5 Worktable longitudinal stroke mm 350 Worktable transversal stroke mm 150 Head vertical stroke mm 80 Worktable dimensions mm 1000 x 250 Worktable height mm 850 Programmer and display for reading data and storing the various programs inserted N° 4 hydraulic pressors for clamping the pieces Aluminium guides with compensating stops Overall dimensions mm 1400 x 1200 x 1200 h Weight kg 580

Manufacturer Ruefli AG SA Biel - Bienne Very powerful exhauster, suction system Spaene suction with filter bag for woodworking machines, Power 2.2kw 2850rpm. machine probably unused except for advance guidance. Special price  ... more information

Used drilling/inserting machine VITAP mod. INSERIX Nr. 23 drilling head spindles Drilling head spindle spacing mm. 32 drilling head motor power HP 2.5 Adjustable head stroke from 0 to 80 mm Year of manufacture 2011 EC  ... more information