other machinery for waste disposal and recycling used for sale

TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...

Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/yearFor sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated).1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW1 piece sorting belt, long, right, no. 15, dimensi ...

PALLMANN AGGLOMERATOR IPA400/40, for LDPE HDPE LLDPE PP, 250 kw drive on agglomerator, 18,5 kw drive on vent, GThe supply includes :, ZERMA GRANULATOR 700/1000, 55 kw drive on granulator, cyclone, fine separator, The line is now dismantled bu complete in all its parts, 400V 3 ph.50Hz, RECONDITONING on request

Fitted with a 12 mm grid N.2 outlets All parts in contact with material are on AISI304 stainless steel Classifying surface 1400×500 mm. Electric panel for start/stop Safety switches Height of granule outlet 650 mm.from floor ... more information

For extruders 500 to 1500 kg/h Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lfted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Counter-blade length 350 mm. 2 cutting edges, 11 kw drive Include n.1 extractor, User’s manual, CE compliance

For a variety of applications : PE PP PS EPS ABS MIXED PLASTICS, RDF, ORGANIC WASTE, etc. Automatic process. No operator needed, huge output, heavy duty. Italian technology and material quality standards. Can be inspected in our premises for a few days more Construction year 2005 – used for tests only Used machine next-to-new (very few worked hours) Very versatile, can be used for a variety of applications as RDF, briquettes, wood plastic compounds or just to agglomerate moist plastics for further pelletising. Materials are subjectd to pressure and friction treatment. The friction generates heat which melts plastics and binds it to the other materials (if present). The Output is a square shaped stream 140×140 mm. (Different matrixes can be supplied) Average output from 1500 to above 2000 kg/hr, depending on material and moisture content. Average power consumption 260 kw/h – 0,12 kw/ ...

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

ROTOR and STATOR knives, MILL BLADES, PELLETIZER KNIVES, perfectly compatible with major Constructors machinery, such as :, ADLER BUZZI ALPINE BANO CDM CMG CONDUX CUMBERLAND DIPRE ELDAN ENGINPLAST FBM FILTEC FOLCIERI FORREC GALA GAMMA MECCANICA GUIDETTI HERBOLD ISVE LINDNER MECCANOPLASTICA MOLINARI MORETTO NEUE HERBOLD NGR OMP PALLMANN PIOVAN PREALPINA PREVIERO PROMECO PRT RAPID RIETER SATRIND STOKKERMILL TECNOFER TECNOVA TPA TRIA VECOOPLAN VIRGINIO VMC WEIMA WERNER WRS ZERMA, or made on constructor’s design Made with top quality steel tempered in various hardness degrees in accordance to the specific task required., For PLASTICS, WOOD, WEEE, TIRES, AL, CABLES, COPPER, and more

4.350 mm long With central chain transport and paddles Flat type on supports Stainless steel structure Construction year 2013 500 mm.outer width 400 mm.inside width ... more information

Including: Injector Hopper Pipe connection diam. 160 mm. Bends Clamps Cyclone Customized to your project ... more information

160 kw. a.c.drive, brand A.E.G., year 1995,, reconditioned ... more information

Dries, reduces size and degasses materials in one step. For PE PP PET PS ABS PC PET PVC POLYLAMINATED, PULPER etc. Low maintenance costs No operator needed High ROI Huge output, heavy duty, made for 24/7 job 400 kw drive (260 kw in work) Italian technology and material quality standards. Output in a continuous flow The melted plastic can feed extruder directly with high energy saving, to be filtered and granulated, thus forming a complete, automatic line from scraps to granule We can provide the special extruder needed for the purpose. The line includes normally : buffer with extraction screws on supporting structure + extruder with motor, gearbox, pulpit control panel, + electric cabinet + strand matrix On separate request : cooling calander, cooling belt, conveyor belt to buffer, metal detector, square matrix with hydraulic pack (for special purposes) Post-sale assistance for spares, a ...

Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction ... more information

Capacity: 15 cbm with dosing belt new control box Steel skid frame with approach plate ... more information

Recycling machine trade AGICOM- Pedergnana OG: Tabletop cable peeling device Junior, DEMONSTRATION DEVICE. The machine is ideally suited for extracting copper from the thinnest electrical cables (with rubber or PVC sheathing). Cable diameter: 2 mm to 28 mm  ... more information

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons  ... more information

Technical data 3-deck ballistic separator:Manufacturer Hartner Maschinenbau GmbH & Co. KG, GermanyType Paper-SortYear of manufacture 2009Angle of inclination 15Throughput capacity with paper approx. 15 t to max. 25 t/hour, depending on materialDimensions of the three ballistic separator segments incl. steel frame and maintenance platform approx. 15,080 x 4,910 x 6,980 mm (l x w x h)Dimensions of the individual ballistic separator segments, without steel frame 5,027 x 3,465 x 2,980 mm (l x w x h)Height of drive axle above ground from infeed conveyor 5,960 mmDimensions of discharge conveyor belt under the ballistic separator 13,457 x 2,506 x 1,561 mmUsable width of discharge conveyor belt 1,950 mmFunctional description:Screening is carried out according to the principle of size sorting. Due to the screen opening and rotation speed can be adjusted to screen out cardboard as well as other im ...

Magnet vibrator Jöst Type: Ms 6.20 c/380 8.1 Amp., 380 Volt Stock: 5 pieces.  ... more information

bulging conveyor belt, sturdy construction, studded belt, belt width approx. 800mm, wheelbase approx. 14.60m. The construction is separated in the middle for transport. The conveyor belt is not disconnected. Sale takes place without any warranty. Loading is possible  ... more information