- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- BDK (1)
- ... more
Manufacturer:
(Category: 1300)
New in: 1955
used
New in: 1956
used
Stone grinding machine Wenzler CH Bottighofen UI 56 Masch. No. 1490 Grinding wheel á 400 mm Table length 3000 mm Table width 1000 mm Table height 700 mm Engine 15 kW Unit 90 ° swiveling Hydraulic table feed Height adjustment, side adjustment electric L x W x H: 820 x 130 x 260 cm Weight approx. 6000 kg Built in 1956 The machine is in good condition, ready to use. From space, removing by buyer. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
New in: 1958
used
Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton ... more information
New in: 1962
used
Qty. 1 Second-hand Sendzimir rolling mill Mfc.: INNSE Type: ZR-22- 49” Built: 1960’s Strip width: 1270 mm Thickness Entry: 5.0 mm Exit: 0.4 mm Mill motor: 1640 kW, 2200 HP Qty. 2 Reel motors: 932 kW, 1250 HP Rolling speed: 0 – 163/288 m/min. Max. coil dia.: 1574 mm Winder mandrel dia.: 610 mm Coil weight: 21 Tons Max. tension: 300 kN Max. roll separating force: 6000 kN Work rolls dia.: 48-61 mm
New in: 1964
used
IN STORAGE - Capacity: 38 mm ? 152 mm dia. bar Length: 2.4 m ? 11.5 m 38 mm ? 216 mm dia. tube Speed: 20-180 FPM at 17° Pass line: 927 mm Rolls: 1 straight roll dia. 508 mm ? 660 mm width Roller bearings Drive: 150 HP motor, 400/1200 RPM, 250 V DC Gearbox: Total ratio 5.13:1 high 15.4:1 low sheave ratio 2:1 Dimensions: 6400 x 5530 x 184 ? L x D x H Features: Trough & pusher buggy Entry guides Total line length: 30 m
New in: 1965
used
Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. ... more information
New in: 1965
used
Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. ... more information
New in: 1966
used
REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN., ... more information
New in: 1966
used
Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...
New in: 1967
used
Furnace / annealing furnace Degussa Wolfgang near Hanau Oven no.: 20881 Type: KO 80/50/120 Year of construction 1967 1000 °Cels Volt 380 Hz 50 AMP 82 kW 54 ... more information
New in: 1968
used
Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 mÂł Tank for dirty HCl: 50 mÂł Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 mÂł Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:
New in: 1968
used
Qty. 1 Second-hand strip rewinding machine Mfc.: IHI Built: 8/1968 Material to be rewonded: aluminium, aluminium alloys Foil thickness max.: 500 ?m Foil width max.: 1,150 mm / min. 800 mm Coil size max.: 1,950 mm (outside dia.) / 300 mm (inside dia.) Max. weight: 9,000 kg Speed: 150m/min.
New in: 1968
used
Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.
New in: 1969
used
New in: 1969
used
min./max. format: 700mm x 500mm/1420mm x 1020mm, throughput: 4500 sheets/h, max. punching force: 600t. Working materials: paper from 90 g/m2, cardboard up to 1.5mm thick, corrugated cardboard up to 4 mm thick. Dimensions X/Y/: 9900mm/2350mm, weight: 25500kg. Documentation available. On-site inspection is possible.
New in: 1969
used
Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min
New in: 1970
used
Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Manufacturer: Lohenner, compressed air tank standing -Content: 2000 l -Operating pressure: 15 bar -Accessories: incl. condensate drain/pressure switch, test book, attachments see photos -Dimensions: 1540/1200/H2230 mm -Weight: 710 kg
New in: 1970
used
Corker BERTOLASO • Model: Bertolaso. • Year: 1970. • Speed: 2000 bph. • Direction: Clockwise. • Natural straight cork and mushroom cork. • Safety protections. ... more information
New in: 1970
used
Connected load: 7.5kW, documentation available. ... more information
New in: 1970
used
weight max.: 5 tstroke: 7000 mmclamping width: 10000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.