planing machines used for sale

Capacity: 260 x 130 mm.Spindles: 5Shaft diameter 40 mmBottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kWMobile axle for various widthsCardan shaft drivePneumatic pressuresFeed speed variable, motor 3 kWMotorised height adjustment of top presssure beamInfeed table 2200 mm lengthtools not included

Working width: 180 mm; Working height: 110 mm; Working shafts: 4; Spindle arrangement: bottom, right, left, top; Motor power shaft bottom & top: 7.5 kW; Motor power shaft right & left: 7.5 kW; Adjustment shaft down: -; Adjustment shaft right: -; Adjustment shaft left: handwheel; Adjustment of the upper shaft: handwheel; Planer heads bottom & top: Centrolock; Planer heads left and right: Centrolock combined with roll forming option; Feed speed: 2; Feed roller pressure: Spring; Current consumption: 32.8 A; Extraction connection: Machine Length: Machine Width: Weight:

– German production – year of production 1995 – right and left spindles with a front milling cutter ensuring parallelism and a right angle of 90° – measurement of the width of the element – electronic width setting TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm control of the width of planing electronic 1 bottom spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (front milling) 4 right spindle 4.2 kW (front milling) 5 top spindle 7.5 kW element width measurement electric height adjustment of feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six steel top rollers one top rubber roller one roller in the working table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm connection diameter 140 mm dimensions of the machine (L/W/H) 456 / 240 / 220 ...

Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment

SPECIFICATIONS: Passage mm: 230 Length entrance table mm: 2000 machining height mm: 120 Spindles: 6 Spindle configuration: 1 BOTTOM - CW 5.5 2 RIGHT - CW 5.5 3 LINKS - CW 5.5 4 TOP - CW 5.5 5 BOTTOM - CW 5.5 6 UNIVERSAL SPINDLE - WEEK 7.5 Spindle diameter mm: 40 Cardan shaft drive Feed speed: 6-36 m/min Revolutions per minute: 6,000 Soundproof cabin

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Description: Planer, 4-sided moulder serial number: AB/095522 size of workpiece width: 20-230mm thickness: 8-160mm feeding speed: 6-30 m/min infeed table length: 2.000 mm height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 2nd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm feeding motor power 3 kw, 380v, 50Hz, 71A  , serial number: AB/095522, feed: planer moulder m/min, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,100 x 1,700 mm, weight approx.: 3,100 kg

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

working width: 630 mm; working height: 250 mm; cutter head: Centro Fix; number of blades: 4; height adjustment: elektrisch; read out workpiece thickness: mech. counter; feed speed: variable ca. 6-18 m/min; infeed roller: steehl; outfeed roller: 2 x steehl; table roller: Ja; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1100kg;

Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996 ... more information

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Capacity: 230 x 130 mm.Spindles: 8Bottom 7.5 kW, fence 7.5 kW, near 7.5 kW, 2nd fence 7.5 kW, 2nd near 7.5 kW, top 11 kW, bottom 7.5 kW universal 11 kWGrooved bedCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short piecesAutomatic bed lubricationSpindle diameter: 40 mm.Spindle speed 8000 r/min5 driven feedrollers in table Feed: 6 - 36 m/min, motor 5,5 kWAutomatic hopperfeedTooling not included

Description: Spindle Moulder Working widht 220 mm Inlet table 2300 mm 4 Independent engines Pressure by spring Unfixed roller on outlet table 2 speedsserial number: 96,086, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,650 mm, weight approx.: 1,800 kg ... more information

TECHNICAL DATA: Working width mm: 530 Working height max mm: 300 Number of knives: 4 Feedrate max m/min: 19 Total connection kW: 4 Weight Kg: 800  ... more information

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Planer Paolioni PF500 Year of construction 1996 Manufacturer: Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knife ): 4 Length of dressing table ( total ) 2500mm both adjustable tables Stop angle adjustable electric brake       Diameter of the extraction nozzle 150 mm Motor 4kW, 380 V, 50 Hz Dimensions length x width x height: 2500x920x1050mm Weight 680 kg CE marked Technical specifications are subject to change Surface planer Paolioni PF500 Year of construction 1996 Manufacturer Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knives):  ...

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (split) connection diameter 140 mm dimensions of the machine (L/W/H) 410 / 200 / 180 cm weight ~ 3000 kg

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

Thickness planer Casadei R51/ H3 Year of construction 1997 Manufacturer Casadei / Busselato Italy S/N 97-61-053 Working width: 510 mm Working height Max.: 300 mm Workpiece length min.: 250 mm Working height min.: 4 mm Maximum cut depth: 8 mm Table length: 860 mm Variable feed speed : 6 / 9 / 14 /22 m/min Knife sizes 4 pieces 510 x 35 x 3mm ( standard knife ) Knife head diameter: 120mm Knife head speed RPM 4600 Main motor: 5.5 kW Dimensions: 1120x960x1250 mm Weight: 643 Kg Electromotive height adjustment Feed roller on the table

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998