boring mills, machining centers used for sale

Description: Support table size: 3250x1300 mm Thickness of the pieces: 100 mm X/Y/Z axis positioning capacity: 4000/1670/370 mm Machine sld without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 6,200 x 2,310 x 2,600 mm, weight approx.: 5,000 kg ... more information

Description: Serial no.  ,A0509/7309 Machine type: Multiple drilling machine for narrow pieces Year of manufacture: 2005 Technical specifications Dimensions for pieces to process : Length  , ,  , , ,  , , ,  ,mm 200 - 2500 Width  , ,  , , ,  , , ,  ,mm 18 - 140 Thickness  , ,  , , ,  , , ,  ,mm 12 - 40 , Drilling units: Vertical from below , ,  ,3 Vertical from above , ,  ,3 Horizontaly from back , ,  ,3 At the ends (right/left) , ,  ,2 Interaxes , ,  , , ,  , , ,  ,32 mm or 16 mm Feeder , ,  , , ,  , , ,  ,YES Total power , ,  ,25 Kw maximum operating load current 45 A power supply 400 V, 3PH/ 50Hz max 7 bar Overal dimension : 5.300 x 2 ...

SPECIFICATIONS: Working Area X: 4000 Working range Y: 1300 Working range Z: 270 C-axis Tool changing stations: 24 Copy milling unit Refrigeration unit Double-sided drilling unit for drilling locks Main motor power KW: 11 Work table: 8 controlled rails Waste conveyors Xilog Plus PC Software Control Vacuum pump capacity m³/h: 250 Protective Weight approx. kg: 5000

Description: serial number: 59639 Technical specifications: working width: min 205 mm max: 3200 mm working depth: min 100 mm max 1200 mm passage height: min 8 mm max: 60 mm control and program system two section conveyor, with inverter and automatic adjustment by NC regulation of the measurements of the backstops in automatic by NC number. 4 Double manual pression units number. 6 Panel supports number. 2 Horizontal heads, each with number. 1 motor 2.3 HP and 20-spindles chuck unit number. 6 Vertical bottom heads 96 mm width pneumatically operated, number. 2 motors 1.8 hp and number. 2 boring chucks quick positioning of the heads along the beam ('X' axis) by means of rack and pinion and crank for fine adjustment with encoder for position indication quick positioning of each chucks crosswise direction ('Y' axis) by means of a ball screw and crank for fine adjustment with encoder ...

Description: The Sapiens 1001 TFF machining centre is dedicated to sawing, routing and drilling components for the production of windows and doors. The structure is a type of bridge with a fixed portal. The cross beam is mounted on rigid, sturdy columns, which are based on the ground by means of levelling and alignment units, both transverse and lateral. The base of the column from the part reference side is connected to the central structure of the die, where the clamping systems and X-axis for part positioning are integrated. The machine entrance and work areas are equipped with vertical and lateral pneumatic pressure devices, which ensure that the workpieces are correctly positioned against the lower and lateral reference of the clamping system. The clamping units slide along the X axis and position the workpieces in the work zones according to the machining to be carried out. In pa ...

x-travel: 2360 mmy-travel: 600 mmz-travel: 800 mmControl: Siemens 840 D total power requirement: 69 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: mUniversal machining center for 5-axis simultaneous machining.Technical specifications:Traverse X/Y/Z 2360 x 600 x 800 mmPendulum stroke with vertical spindle left/right 1160/700 mmTable clamping area 2750 x 600 mm with 4 T-slotsTool holder SK 50Spindle speeds 30 - 4000 rpm.Equipment:CNC control Siemens 840 D with Shop Mill DIN ISOCNC rotary table type RTA 3-520CNC swivel milling head infinitely variable positioningTool changer with 26 tool placesChip conveyorCoolant system with high-pressure pump and belt filter systemCoolant through spindle 20 barElectric hand wheelSpace requirements:Machine length 5650 mm + 1800 mm with chip conveyorMachine width 3500 mm plus control panelMachine height 3200 mmMachine without clamping v ...

Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

bore depth: 8850 mmswing diameter: 1000/900 mmtotal power requirement: 129 kWweight of the machine ca.: 47 tdimensions of the machine ca.: mcore drilling diameter max.: mmCNC control Sinumerik 840Ddiameter of the face plate 1200mmsteady restchip conveyorTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mmUmlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mmMax. Bohrtiefe / max. drilling depth 8850 mmSpanndurchmesser Planscheibe / clamping diameter at face plate 900 mmDrehzahlbereich / spindle speed 1-300 U/minVorschubbereich / infeed 0,5-4500 mm/minAntriebsleistung / drive capacity 129 kWWerkstückabmessungen: / workpiece measures Min. Aussendurchmesser / min. outer diameter 150 mmMax. Aussendurchmesser / max. outer diameter 900 mmMax. Werkstücklänge / max. w ...

Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse table: 8 Traversen, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 60, LED- ...

bore capacity in steel (diameter): 25 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 2240 U/min: mmtotal power requirement: 0,75 / 400 kW / Volttool taper: 2 weight of the machine ca.: 80 Kgdimensions: 0,5 x 0.3 x 1000 mmBench drill- Left/right rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control NC400 Plus Travel length min/max 205/3.200 mm Travel width min/max 120/1.200 mm Drilling area in Y 120/608 mm  ... more information

table length: 4000 mmtable width: 3000 mmtable load: 60 ttotal power requirement: 14.3 kWweight of the machine ca.: 48.5 tdimensions of the machine ca.: mBrand: FXType: 83.300/400Used machineDigital readout: Heidenhain ND 780 Table length: 4.000 mmTable width: 3.000 mmTable load: 60 TMovement: 2.000 mmWidth T-slots: 58 mm (M30) mmFeeding: 4 - 1.500 mm/minRapid traverse: 4.000 mm/minPower: 14,3 kWMachine weight: 48.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine Specifications: Model: BIESSE ROVER B 4.50 Year of Manufacture: 2006 Operating System: BiesseWorks on Windows XP Number of Axes: 3 X-axis: 5220 mm Y-axis: 1750 mm Z-axis: 225 mm Spindles: 1 Main Motor Power: 12 kW Maximum RPM: 18000 Work Area: Effective Work Area: 6m x 1.3m Workpiece Depth: Adjustable (slightly larger than the nominal depth) Tooling: ISO30 Tool Holder Toolholder Included (Tools not included) Variety of toolholders, including saw aggregate for X, Y, or 45° cuts Tool Magazine: Capacity: 12 positions Table Configuration: 8 Tables 4 Vacuum Blocks per Table Additional Features: Serial Number: 71035 3-Axis Machining Year of Construction: 2006 Air Supply: 7 Bar Mass: 5700 kg Power Supply Voltage: 380 VAC Rated Current: 38 A Number of Power Supply Phases: 3 Power Consumption: 21.1 kW Frequency: 50 Hz BiesseWorks Software Operating Hours: 28 ...

Description: Eccentric connector drilling / cup hinge drilling Connector drilling Hole line system / Frame drilling 4 clamps / 4 hold-down devices Technical data: Motor: 1.5 kW Spindle speed: 2800 rpm Max. clearance between the side stops: 750 mm Working height: 850 mm Clamping height max. workpiece thickness: 100 mm max. hole row position dimension: 300 mm Tool shank diameter: 10 mm Weight: approx. 390 kg Space requirement (depth width height): 115x120x125 PRICING IN OVERHAULED CONDITION SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools ...

Hardware drilling and recessing machine, with multi-spindle headTable mountedMotor 1,1 kWFence left and right, 1,5 m. long ... more information

drilling machinedrilling lines 7 spindlesMotor 1.1 kWFence left and right 1.5 m. ... more information

Description: X stroke: 3390 mm Y stroke: 1850 mm Z stroke: 180 mm - HSK63 electro-spindle - 4 axes - 24-spindle vertical drilling unit - 6 horizontal milling unit - blade groove - 8-beam work surface - pivoting suction cups - work areas - clamps - BIESSE WORKS software and panel optimisation - 12-position tool magazine on Z carriage - Independent blade for grooving in the X axis - Front protection and safety system with belt - Perimeter protection grids - Automatic lubrication system - Air conditioning system for cooling and cleaning the machine control unit - Vacuum pump mc / h 250 - with electrical cabinet - Accessories (32 milling cutters, drills, etc.) Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 13,000 x 2,200 x 2,600 mm, weight approx.: 4,650 kg

Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language)working width y-axis: 1,600 mm, working length x-axis: 3 ...

Manufacturer: Biesse 5 Achsmaschine, Type: Arrow FT-5 Achsmaschine, Year: 2007, Control: XP 600, Working range X: 2 X 1600 , Working range Y-axis: 2600, Working range Z: 300, C axis: yes, B-axis: yes, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): ca. 24000, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 3, Number of tables: 2, raster table: yes, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 250, Drill vertical: 3, Saw unit: 120 mm, Portal machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, Zentralschnierung: yes, Available: sofort, FREE TEXT: Wassergekühlte Spindel, Year :2007