boring mills, machining centers used for sale

Description: 3 spindles Crosscut saw Glazing bead saw Working width min/max: 30/220 mm Min/max working height: 30/100 mm Working length min/max: 330/2600 mm Spindle power: 7.5/12 kW, Saw: 35 kW Spindle speed min/max: 2800/7000 rpm Spindle section: 40 mm Cross clamping length Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 3,500 x 4,500 x 2,300 mm, weight approx.: 4,000 kg

bore diameter: 550 mmSpindle diameter: 100 mmbore depth: 320 mmturning speeds: 10 70 U/minfeed stepless: 0 - 12 mm/minvoltage: 380 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 1.35 tdimensions of the machine ca.: 1,0 x 2,5 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine with possible inclination up to 45°. Maximum travel along the drilling axis: 75 mm Maximum machinable width: 600 mm , Maximum stroke in depth: 165 mm Machine equipped with No. 35 vertical spindles, powered by two ICME electric motors.Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,400 mm, weight approx.: 400 kg

Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

PANHANS 116 YOC 1987 Motor power: 1.5 kW Rated current: 3.5 A 2-lever operation max. drilling depth: 130 mm Height adjustment: 135 mm max. slotted hole length: 240 mm Height adjustment via handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Length stop 1 eccentric Workpiece clamping Suction device: Connection 100 mm Table size: 520 x 290 mm Weight: 220 kg Dimensions (approx. dimensions): W: 90 cm D: 125 cm H: 115 cm

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988 ... more information

Manufacturer: Nottmeyer, Type: Kommet Super SB, Year: 1988, Work bays: 1, Throuh running machine: yes, Working range X: 2600, Working range Y-axis: 800, Drilling support horizontal: 2, Drilling supprt from bottom: 5, Drill support from top: no, Belt conveyor: yes, Grid 32 mm: yes, Horizontal drilling from both sides: yes, FREE TEXT: ink. Bohrgetriebe , Year :1988

Working width: 630mm, max. portal passage: 690mm, clamping height: 100mm, drilling stroke: 120mm, weight: 300kg, on-site inspection is possible. ... more information

bore capacity in steel (diameter): 40 mmthroat: 315 mmbore stroke: 200 mmtaper MK: 4 speeds: 12: 56-1120 U/minbore capacity in cast iron: 50 mmtable-size: 700 x 450 mmDistance spindle/table max.: 710 mmtotal power requirement: 4/3,43 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,14 x 0,7 x 2,58 mElectric 380 Volt: Thread cutting device: Croll-moving table: Vice: BB 175 mmHeavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: machine reserved) for longitudinal and transverse single-sided use of squared timber for windows and doors. - grooved spindle length 320 mm - maximum working circle 320 mm - roller feed system - profiling spindle 320 mm - maximum working circle 220 mm - Maximum working length (with stops) 2800 mm - Minimum workpiece width 30 mm - Maximum workpiece width 140 mm -Maximum chip height 115 mm - Motor power 4 PS - Crosscut saw speed 3000 U/Min. - Diameter of crosscut saw extraction hood 120 mm - Clamping length of split spindle 320 mm - Under-table split spindle travel 265 mm - Diameter of split spindle 50 mm - Grooving tool diameter 350 mm - Slot spindle speed 3250 U/Min. - Hood diameter 2x120mm - Feed speeds 1.5-16 M/Min. - Profile spindle length 320 mm Machiensold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 2,050 x 2,600 x 2,000 mm, weight approx.: 2200  ...

Manufacturer: MAW, Year: ca.1990, One or two Spot machine: 1, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 300, Number of units: 2, Clamping system: pneumatik, Wight approx. kg: 500, FREE TEXT: Hettich System, Year :ca.1990 ... more information

Manufacturer: MAW, Year: ca.1990, One or two Spot machine: Einzelplatz, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 800, Number of units: 1, Clamping system: yes, Wight approx. kg: 400, FREE TEXT: mit Luftkissentisch Anschlagsystem, Year :ca.1990

Manufacturer: Priess und Horstmann, Type: BAT 2, Year: ca.1990, Control: hand, Program: yes, Function: 1 Platz, Work piece width min-max mm: Bänder bohren und setzen, Min.-max. workpiece height in mm: 2500, Destacking unit: 1000, Fitting type: 2, Schliesszylinder Bohrstationen: 2, Fitting type: 2, Fitting type: 2, Dowel driving station: yes, Working range X: yes, Year :ca.1990

Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991

x-travel: 5000 mmy-travel: 550 mmz-travel: 550 mmControl: Fanuc type: Series 15 M table surface area: 5000x520 mmTable load: 4000 kgquill stroke: 550 mmthroat: 580 mmdistance between table/spindle: 250-800 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minTool changer: 40 total power requirement: 55 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Morbielli, Feeding speed max m/min: 200, Working range X: 3590 , Working range Y-axis: 1800, Working range Z: 55, Milling engine 1 hours power: 5 - 7,5 PS, rpm 1): max 18.000, Vertical drills-X: 14, Drill vertical Y: 16, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, Year :1991

Dowel drill Schleicher Type Partner 27/2 Specifications: • Year of construction: 1991 • Working width (mm): 900 • Number of drilling spindles: 27 • Pitch (mm): 32 • Drilling unit: swivelling • Motor power (kW): 1.9 • Space requirement L x W x H (mm): 1120 x 900 x 1150 • Weight (kg): 550

Number of spindles: 9; Drill bit: 32mm; Power consumption: 2.2kW; ... more information