peripheral equipment (e.g. heating, conveying, drying) used for sale

Manufacturer: Cefla, Type: Trommelwender, Year: 2003, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 500-3500, Min.-max. workpiece height in mm: 10-80, Continous adjustable feeding speed m/min: yes, Roll transport: yes, Machine from production line: yes, Total lenght: 4500, Year :2003

Manufacturer: Humboldt, Type: Ureifungsautomat, Year: 2003, Control: hand, Sealing unit: yes, Heat/weld sealing: yes, Belt width: 12, Belt tension adjustable: yes, Chassis: yes, FREE TEXT: Tischgrösse 900 X 590, Year :2003 ... more information

Manufacturer: Schmalz, Type: Schleifvorrichzung, Year: ca.2003, Installation height: 950 +-, Tiltable: no, Drehbar: yes, Vakuumpumpe m³: yes, Motorleistung kw: ca.0,5, Rundsauger Stück: 8, Schmalteilsauger Stück: kein, Tiltable: no, Drehkranz mit Arretieung: yes, Aushebung der Sauger: yes, Lifting hight mm: 20 mm, Year :ca.2003

Conveyor for wet pieces in laquer lineLength: 3 m.Width: 1,3 m.Cleaning brush at the bottomMotorised feedworks ... more information

FIELDS AF-22 YOC 2003 Motor power: 2.2 kW (400V) Rated current: 5.3 A 2-Bag Suction 1 filter element Suction connection: 160 mm Wall incl. various pipe components (as shown) only complete - no retail sale without lattice box Dimensions according to manufacturer's specifications: 1,300 x 580 x 2,150 mm

curved conveyor beltbend 90?width carpet 500 mmtotal width 700 mmmin/max height 890/990 mmlength inner size 2800 mmengine 0.55 kW ... more information

Suction nozzle diameter: 160mm; maximum flow rate: 1850 m³/h; Nominal flow rate: 1448 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2120 pa; Filter area: Residual dust content: less than 0.2 mg/m³; Noise level: Chip bag volume: Filter cleaning: pneumatic; Motor power: 2.2 kW; Machine length: 1600 mm; Machine width: 700 mm; Machine height: 2200 mm; Weight:

Manufacturer: Cefla, Type: Rollgang, Year: ca.2003, Working length mm: 1350, Working widht mm: 920, Ex-schutz: yes, UV-Band: ca220, Total hight mm: 80, Belt width: Schiene, Frequency converter: 3-5, Own controller: yes, Total power kW: ca.3000, Working length mm: 1350, verriegelungskontakt vor Maschine: 1600, Year :ca.2003

SPECIFICATIONS: Funnel size mm: 2200 x 1100 Installed capacity KW: 11.0 + 2.2 Capacity per hour: 0.6 m3 Screen diameter mm: 40 for wood chips Pneumatic opening/closing of the tank  ... more information

Manufacturer: Boge, Type: S 150, Year: 2004, Volume flow m³/min: 14,20-18,95, Operating hours: 24098, Running idle houres: 1190, Final compressed pressure bar: 7,5-13, Drive power kW: 110, FREE TEXT: Lüftermotor 4, Year :2004 ... more information

Manufacturer: Ligmatech, Type: Profi TD/31/25/12, Year: ca.2004, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :ca.2004

Description: • Air blade air, evaporation tunnel • Serial number 6176  ,• Total installed power 3.45 KW • Maximum passage width approx. 1400 mm • Maximum passage height approx. 80 mm • Tunnel length 3000 mm • Heating power 56000 Kcal/hApprox. Onsite Dimension. (l x w x h): 3,500 x 2,600 x 2,380 mm, weight approx.: 2,000 kg

Bagging filter PAFO 3/3-20/1518 with vibratory motor with Duct bend Channel Non-return valve Duct fitting without fan Year of manufacture 2004 L x W x H: 200 x 70 x 300 cm Weight 350 kg The bagging filter is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004

Hydraulic gripper for wooden beams with modular suction cups Load capacity kg: 700 Number of suction cups: 16 Dimensions of suction plate mm: 80 x 750 Procedure mm: 8000  ... more information

Complete sprinkler system manufacturer R-CON, Sweden The plant is in very good condition as only one annual test run was carried out. Service documents available, including all components. incl. safety tank for water 200 m3 (for compensation in case of external water interruption) 552 sprinklers 1.3 km water pipes 2-3 m distance between sprinklers New safety engines

Manufacturer: Böhl Wickelmaschine, Type: Meister S 100 +FM, Year: 2005, Control: ESA, Work piece width min-max mm: 300-850, Min.-max. workpiece length in mm: 1500, Min.-max. workpiece height in mm: 50-500, Belt conveyor: 6 Meter vorlegeband, Ausrichtstation: yes, Width:165 to 250 mm: yes, Automatic product recording: yes, Belt tension adjustable: yes, Function repeat: yes, Min. cycle rate: 4, Feeding belt L x W x H mm: 2500, Year :2005

Manufacturer: Cefla, Type: Transportband, Year: ca.2005, Working length mm: 2500, Working widht mm: 1400, Total hight mm: ca.950 , Engine power kW: 0,5, Feeding speed max m/min: 10-22, Feeding speed continous adjustable: steuerbar über Umrichter, FREE TEXT: ohne Schaltschrank, Year :ca.2005 ... more information

Manufacturer: Homag Transportrollgang mit angetriebenen Anschlagriemen, Year: ca.2005, Control: yes, Working length mm: 3500, Working widht mm: 2050, Engine power kW: 1,5, Feeding speed min-max m/min: 10-40, Durchmesser Rolle mm: 50, Rollenmittenabstand: 70, angetrieben über Zahnriemen: Flachriemen, Anschlaglineal verstellbar: Transportriemen, Anschlagkante Höhenverstellbar: yes, Schrägstellung der Rollen (Durchgehend): yes, Beschichtung: Gummi, Own controller: yes, Total hight mm: 980 +-, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :ca.2005

Manufacturer: Nordjysk , Type: Folienwickelstation mit mit Mit Pufferstation und Wickelübergabe , Year: 2005, Control: Programm, Inlet conveyor: Rollfgang, Buffer path: Ja für Gabelstapler Entaldung, Outlet conveyor: Winkelübergabe, Products: Paletten, Max. pallet weight in kg: 1,5, Max. pallet size in mm: 2100 X 900, Max. pallet height in mm: 1600, Through running hight mm: 1600, Working width mm: 1400, Turntable diameter in mm: 1500, Turntable speed: regelbar, Feeding belt mm: 600, Foil stations: 1, Intermediate conveyor mm: yes, Through running hight mm: 1600, Working width mm: 1400, FREE TEXT: inkl. Winkelübergabe/Verteilerwagen und Pufferstation, Year :2005