peripheral equipment (e.g. heating, conveying, drying) used for sale

Suction nozzle diameter: 160mm; Nominal flow rate: 1780 m³/h; Volume flow monitoring: pressure differential indicator; Vacuum: 21 mbar; Filter area: 11.5 m²; Residual dust content: less than 0.2 mg/m³; Noise level: Chip bag volume: Filter cleaning: manual; Motor power: 2.2 kW; Machine length: 1600 mm; Machine width: 800 mm; Machine height: 1900 mm; Weight:

Manufacturer: Jungheinrich, Type: MP, Year: 1994, 1stupright frame pieces Qty.: 10, 1stheight mm depth mm: 4000 / 700, 1.Transverse beam Qty.: 18, 1.Transverse beam length mm: 3900, 2.Transverse beam Qty.: 4, 2.Transverse beam length mm: 1900, Compartment load in kg: 1997, Year :1994 ... more information

Manufacturer: Sabore, Type: Drucklufttrockner SD 31 A, Year: 1994, Final compressed pressure bar: 16, Drive power kW: 0,17, Year :1994 ... more information

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Industrial extraction system NESTRO NE160 manufacturer: NESTRO Lufttechnik GmbH type: NE 160 mach.-Nr.: 1041 year of construction: 1994 comm.-Nr.: 0549/210/100/0859 stock-Nr.: 1803 + Regular Price: 2.180,- € > Reduced Price: 1.090,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) intake manifold Ø: 160 mm filter area: 11,5 m² volume flow: 1.780 m³/h (after cleaning) Negative pressure in front of ventilator: 3.000 Pa Minimal volume: 1.447 m³/h Negative pressure in front of ventilator: 3.550 Pa Negative pressure at connection: 3.100 Pa – (4,0 m hose length mit Ø 160) working temperature: 5° to 4 ...

intake connection: 300 mm; exhaust connection: 300 mm; air flow: 6900 m³/h; motor power: 5,5 kW; weight: 100 kg; Very stable blower with steel impeller. ... more information

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: RBO, Type: GPS 88.D 1300, Year: 1994, Program: RBO, Stacking device: 250-2800, Work piece length max mm: 250-2800, Work piece width max mm: 300-1300, Min.-max. workpiece length in mm: 10-50, Stretchfolie: 2, Stack height in mm: 60, Stack arrangement: 280, Workpiece weight/stack position in kg: yes, Inlet roller conveyor mm: 2, Outlet roller conveyor mm: 60, Number of sucking lines: no, Feeding speed continous adjustable: ca.20, Feeding by cross conveyor: yes, Protective panel feeding: 6, Year :1994

Shredding chippers for scrap wood Low-speed with moving floor Rotor width 9th 600 mm 18.5kw motor  ... more information

Manufacturer: Bargstedt, Type: Transportband, Year: ca1995, Control: hand, Working length mm: 6500, Working widht mm: 800, Total hight mm: 950 Verstellbar, Engine power kW: 1,5, Feeding speed max m/min: 8-20, Feeding speed continous adjustable: yes, Belt control: no, Working hight adjustable mm: yes, Year :ca1995

Manufacturer: Geldmeier, Type: Drehtisch, Year: 1995, Control: keine, Turning device: wendevorrichtung, Working length max mm: 1400, Working widht max mm: 950, Feeding speed max m/min: 20, Feeding speed min m/min: no, Headroom adjustable: yes, Roller width in mm: 950, roller diameter mm: 80, Working hight mm: 850, Year :1995

Manufacturer: Homag , Type: TD 12 / 25, Year: ca 1995, Turning station: yes, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 30, Feeding speed min m/min: 10, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +/- 900, Engine power kW: 6, Year :ca 1995

Manufacturer: Venyeskob, Type: Transportband, Year: ca.1995, Working length mm: ca.7500, Total hight mm: 950 +-, Engine power kW: 1,5, Feeding speed max m/min: 2-5, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, FREE TEXT: überbaut und verschiebbar, Year :ca.1995 ... more information

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Manufacturer: Unbekannt, Year: ca.1995, Working length mm: 2500-3000, Working widht mm: 1300, Total hight mm: 9800, Engine power kW: 1,5, Feeding speed max m/min: 8-25, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :ca.1995 ... more information

Manufacturer: Venyeskob , Type: Gurtband Typ H, Year: 1995, Working length mm: 6000, Working widht mm: 1300, Total hight mm: ca 980, Feeding speed continous adjustable: yes, Year :1995 ... more information

Manufacturer: Venyeskob, Year: 1995, Working length mm: 3950, Working widht mm: 1300, UV-Band: no, Total hight mm: 920 +/- 50, Belt width: 1300, UV conveyor belt: no, Bandkühlung: no, Own controller: no, Bandsteuerung : yes, Total hight mm: 920 +/- 50, Engine power kW: 0,75, Total power kW: 0,75, Feeding speed min-max m/min: 12-20, Feeding speed continous adjustable: extern FU, Belt control: yes, Working hight adjustable mm: yes, Movable: no, Required space L x W x H mm: 4000x1600x1000, Total lenght: 4000, Feeding speed adjustable: extern, Hydraulic platforms: no, Installation height: 920, Weight approx. kg: 500, CE-Sign: no, Year :1995

Manufacturer: Venyeskob, Year: ca.1995, Working length mm: 1500, UV Transportband: no, Total hight mm: 950 +/-, Engine power kW: 1,2, Feeding speed min m/min: 5-25, Belt control: no, Working hight adjustable mm: yes, Wight approx. kg: 300, Year :ca.1995 ... more information

Manufacturer: Tranportkurve, Year: ca.1995, Outer radius mm: 6600, Inner radius in mm: 3450, Belt transport: yes, Feeding speed max m/min: 5-15, Feeding speed min m/min: ca.2, Year :ca.1995 ... more information

Manufacturer: Venyeskob, Type: Gurtbandkurve, Year: 1995, Outer radius mm: ca 4000, Inner radius in mm: ca 2500, Outer diameter mm: ca 8000, Belt transport: yes, Working hight mm: ca 980, Year :1995 ... more information