- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- ADL (1)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIR TOOLS (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANHUI ZHONGKE OPTIC- (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARBURG (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BAKA (1)
- BANK (1)
- BARTH (4)
- BAS (1)
- BAUER (15)
- BAUTERMIC (1)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (7)
- BIO RAD (1)
- BIOSAN (1)
- Bito (2)
- BLOKSMA (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (8)
- BOSCH REXROTH (1)
- BOSCHE (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRINKMANN PUMPS (2)
- BRIXO (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BRÃœHL (1)
- BUDERUS (1)
- BUSCH (1)
- BWB (1)
- BÃœHLER WÃœRZ (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CAR JACK (1)
- CARL STAHL (1)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CCD (1)
- CIVIEMME (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COLUMBUS INSTRUMENTS (1)
- COMAC (1)
- CONCEPT LASER (1)
- ... more
Manufacturer:
(Category: 2500)
New in: 2015
used
Puranity PU 20Â in complete working order but needs new filters. Intended use Increasingly sophisticated technologies, continually lower detection limits in laboratory analysis, and the requirement for biologically-pure water in research correspondingly require the water used to be of ever higher quality. The novel Puranity PU 20 line of water purification systems has been developed to produce such ultrapure water, as well as to fill the needs for userfriendly systems and complete solutions Puranity PU 20 ultrapure water systems produce salt-free, organically-pure particle-free and sterile filtered ultrapure water. To make full use of the long and economical service life of the high-quality purification media, the feedwater for Puranity PU 20 systems must be pretreated by an appropriate purification step (reverse osmosis, ion exchange or distillation. Application areas ...
New in: 2015
used
7.750 € Description: Serial number 010053 Kärcher article number: 1.186-121.0 Drive 4-stroke LPG engine / Kubota Drive - Power: 17.5 kW Max. Area coverage: 13000 m²/h Working width: 1000 mm Working width with 1 side brush: 1300 mm Sweepings container: 300 l Gradeability: 18 % Working speed: 10 km/h Filter area: 5.5 m² Gas bottle included Approx. Onsite Dimension. (l x w x h): 2,150 x 1,350 x 2,200 mm, weight approx.: 900 kg
New in: 2015
used
Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...
New in: 2016
used
1.900 € Description: Industrial chiller Serial number 6010982-1842 Nozzle: EWF-10 Q Filler: FKP-SP 312 Power: 7.5 kW Output shaft: 40 x 80 mm Output speed: 521 Rpm Design pressure: 0,5 bar Maximum working pressure: 0,7 bar Connection: 400/690 V Frequency: 50 Hz CE standards Stand structure includedApprox. Onsite Dimension. (l x w x h): 4,500 x 3,550 x 6,000 mm, weight approx.: 4,000 kg
New in: 2016
used
10 € Description: serial number 690BR018234 input 100-240 VAC max power 276 VA Approx. Onsite Dimension. (l x w x h): 200 x 200 x 250 mm, weight approx.: 4 kg ... more information
New in: 2016
used
1.600 € Description: Stationary metal analyzer Serial number 16004993 , Missing computer and softwareApprox. Onsite Dimension. (l x w x h): 550 x 1,000 x 600 mm, weight approx.: 30 kg ... more information
New in: 2016
used
1.400 € Description: Drying machine Serial number 034Approx. Onsite Dimension. (l x w x h): 4,600 x 1,900 x 2,100 mm, weight approx.: 1,800 kg ... more information
New in: 2016
used
1.600 € Description: FUCHS MKF625.1 special suction unit with activated carbon filter. Exterior condition as newApprox. Onsite Dimension. (l x w x h): 680 x 380 x 830 mm, weight approx.: 65 kg ... more information
New in: 2016
used
100 € Description: Volume: 3000 Liter Material: Fe 360B Wall thickness: 3 mm Fitted with drain pan Approx. Onsite Dimension. (l x w x h): 2,600 x 1,650 x 2,000 mm, weight approx.: 650 kg ... more information
New in: 2016
used
1.900 € Description: Heater Serial number 4784 Max Temperature 300ºC Internal chamber: 900 x 530 x 2000 mm Air Flow 3900 m3/hApprox. Onsite Dimension. (l x w x h): 5,900 x 1,650 x 2,400 mm, weight approx.: 2,000 kg ... more information
New in: 2016
used
100 € Description: Fabrication number: 6403 Item number: 70848 Liquid volume: 250 L Operating pressure: max. 20 barApprox. Onsite Dimension. (l x w x h): 1,000 x 1,100 x 1,200 mm, weight approx.: 150 kg ... more information
New in: 2016
used
1.800 € Description: Laser power10, 20, 38, 50 or 70 watts Maximum peak power 70 watts Electric focusing (programmable) Maximum part size L x W 670 x 700 mm Laser cutting possible with open door (Class IV operation) Programmable Z-axis Turning axis/parting attachment with 3-jaw manual chuck for marking round parts , Including ELECTROX extraction system AD ORACLE IQApprox. Onsite Dimension. (l x w x h): 2,000 x 1,400 x 2,100 mm, weight approx.: 380 kg
New in: 2016
used
This IEMCA Master 80 Bar Feeder was manufactured in the year 2016. The machine is barely used. There are 2 units available of the same model available. Both bar feeder were connected to identical Index C200 (YOM 2016 with Unimag 4 interface). They have a bar capacity of 80mm. Bar feeder #1 is at 7,500 and Bar feeder #2 at 8,000 production hours. The Master 80 HF is recommended for frequent unloading (even multiple times a day) needs, catering to a wide range of bars (e.g., from Ø 15 to 80 mm), accommodating both hexagonal and square materials, and for those seeking the convenience of a loader without manual adjustments required.
New in: 2016
used
This MECANUMERIC MECAPRO 3020 Milling machine was manufactured in the year 2016 in France. It is equipped with a Mecapro control unit. ... more information
New in: 2016
used
This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. ... more information
New in: 2016
used
2.400 € Description: Rotary vibrator Serial number: 74223 Operating voltage: 400 V Frequency: 50 Hz Type: RM 300 Speed: 985/1485 rpm Diameter: approx. 1150 mm Inner height: 540 mm Read operating hours: 6318hApprox. Onsite Dimension. (l x w x h): 1,300 x 1,600 x 1,220 mm, weight approx.: 700 kg ... more information
New in: 2016
used
2.200 € Description: Vibrator Serial number 1607550/13-R Ø 1400 mm Power 4 kW , Cable conection cutted (see pictures for more information)Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 1,600 mm, weight approx.: 1,170 kg ... more information
New in: 2017
used
2.200 € Description: Air conditioning Serial number OV17-01823 Air flow: 54,000 m3 Available pressure: 600 Pa Total pressure: 849 Pa TECNIFAN TLZ 900T drive fan DIMOTOR motor with 22 kW of power DANFOSS FC101 P22K inverter CE standardsApprox. Onsite Dimension. (l x w x h): 5,000 x 3,200 x 2,450 mm, weight approx.: 1,350 kg
New in: 2017
used
450 € Description: Aluminum degasifier Serial number 1784 Power: 2.3 kW Working pressure: 5 bar Rod height: 700 mm Rod diameter: 190 mm CE standardsApprox. Onsite Dimension. (l x w x h): 600 x 1,340 x 2,950 mm, weight approx.: 350 kg ... more information
New in: 2017
used
150 € Description: Serial number: 136025 Load capacity: 100 kg Compressed air operatedApprox. Onsite Dimension. (l x w x h): 700 x 500 x 1,250 mm, weight approx.: 80 kg ... more information