- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIR TOOLS (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANHUI ZHONGKE OPTIC- (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARBURG (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BANK (1)
- BARTH (4)
- BAS (1)
- BAUER (15)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (7)
- BIO RAD (1)
- BIOSAN (1)
- Bito (2)
- BLOKSMA (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (8)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRINKMANN PUMPS (2)
- BRIXO (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUSCH (1)
- BWB (1)
- BÃœCHEL (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CAR JACK (1)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CCD (1)
- CIVIEMME (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COLUMBUS INSTRUMENTS (1)
- COMAC (1)
- CONCEPT LASER (1)
- CONEMASTER (1)
- CONTEC (1)
- COYNCO (5)
- CTS (1)
- CUSTOM MADE (1)
- DAF (1)
- ... more
Manufacturer:
(Category: 2500)
New in: 2006
used
200 € Description: DMO motorised roller conveyor for panel extraction aid from single-sided edgebander (or other track machine).Approx. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 1,500 mm, weight approx.: 150 kg ... more information
New in: 2006
used
Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C
New in: 2006
used
This STEINHAUER eCAB workCenter HS was manufactured in 2006 in Germany. Machining outer parts of control cabinets and mounting plates. It features a spindle motor operating at 18,000 rpm and offers 12 tool positions with SK30 compatibility. It includes special construction for holding chamfered panels with a depth of up to 290mm and a panel length of 2250mm, with a slot width of up to 10mm. Contact us anytime for further information.
New in: 2006
used
This LVD Strippit Global 30 1525 Punching machine was manufactured in the year 2006 in the United States. It is equipped with a Fanuc Series 180i- PB control unit. The machine has a punching force of 300 kN. ... more information
New in: 2007
used
EKRA Automatic Screen and Template Printer Spare Parts Dispenser with Cooling Unit Functional: not tested Condition: used, no operating instructions available Model No.: X6 HSP Weight: 930 kg Year of construction: 2007 Voltage: 400 V Frequency: 50/60 Hz Working voltage: 24 V Phases: 3 Power: 2.0 kW Fuse: 16 A Pressure: 6 bar Dimensions: 1890 x 1700 x 1610 mm If you have any questions, inquiries or the like, please send us an e-mail.
New in: 2007
used
The device was mainly used as a demonstration device (commercial agency). That's why it only has 107 working hours. After a general overhaul in 2020 (1400 €) only 1 use. 400V 32A; 70 liter tank (thus full operation 3.5 hours); Steam temp. 165° or 195° C; working pressure: 6.5 or 9.5 bar. For better use, the steam hose and control cable have been extended. In addition: 1 surface cleaner, special cleaning agent approx. 30 litres
New in: 2007
used
90 € Description: Gas Nailer Serial number 084390 Nail lengh max 39 mm Nail Ø 3.0 / 2.6 mmApprox. Onsite Dimension. (l x w x h): 560 x 450 x 200 mm, weight approx.: 8 kg ... more information
New in: 2007
used
Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder ... more information
New in: 2007
used
1.500 € Description: Industrial chiller Serial number EKP1922 400 V 50 Hz A max/FLA: 178 kW max: 111 CE StandardsApprox. Onsite Dimension. (l x w x h): 4,425 x 2,260 x 2,185 mm, weight approx.: 3,645 kg ... more information
New in: 2007
used
1.500 € Description: Vacuum lifter with vacuum pump Load capacity 400kgApprox. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 1,200 mm, weight approx.: 200 kg ... more information
New in: 2007
used
This DÜRR ECOCLEAN 70c washer machine was built in the year 2007 and has 38472 production hours. ... more information
New in: 2007
used
This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm. ... more information
New in: 2007
used
This Jeti 3300 Industrial Printer was manufactured in the year 2007 in Canada. The machine has a psi of 100-150 min-max. ... more information
New in: 2007
used
This Durma RP9 1250x20 punching machine was made in the year 2007 in Turkey. It is equipped with a Siemens 840 control unit. The machine has a punching force of 200 kN. Set of tools included. ... more information
New in: 2007
used
This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit. ... more information
New in: 2007
used
This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. ... more information
New in: 2008
used
Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer. ... more information
New in: 2008
used
Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Components of the ...
New in: 2008
used
50 € Description: Article number: 0701 138 X Rated power: 1200 WApprox. Onsite Dimension. (l x w x h): 800 x 500 x 1,300 mm, weight approx.: 20 kg ... more information
New in: 2008
used
500 € Description: Volume flow: 320 m³/h Max. static pressure: 21000 PA Rated current: 5.2A Control voltage: 230 V Supply voltage: 230 V Motor power: 1.2 kW Approx. Onsite Dimension. (l x w x h): 600 x 400 x 770 mm, weight approx.: 76 kg ... more information