- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIR TOOLS (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANHUI ZHONGKE OPTIC- (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARBURG (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BANK (1)
- BARTH (4)
- BAS (1)
- BAUER (11)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (7)
- BIO RAD (1)
- BIOSAN (1)
- Bito (2)
- BLOKSMA (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (8)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRIXO (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUSCH (1)
- BWB (1)
- BĂśCHEL (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CAR JACK (1)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CCD (1)
- CIVIEMME (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COLUMBUS INSTRUMENTS (1)
- COMAC (1)
- CONCEPT LASER (1)
- CONEMASTER (1)
- CONTEC (1)
- COYNCO (5)
- CTS (1)
- CUSTOM MADE (1)
- DAF (1)
- DANFOSS (1)
- ... more
Manufacturer:
(Category: 2500)
New in: 2011
used
1.500 € Description: Refrigeration system: Refrigerant R404/A Capacity 15.8 kg Ts= -10 to + 125 °C Ps= 35 bar HP Ps= 20 bar LP Air system: Ts= -10 to + 60 °C Ps= 16 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 1,350 x 2,250 mm, weight approx.: 610 kg ... more information
New in: 2011
used
20.000 € Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg
New in: 2011
used
25.000 € Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg
New in: 2011
used
920 € Description: - Fire pump system - It includes: - GRUNDFOS 82EN0019K main pump, power 15KW - GRUNDFOS CR3-15 X-A-A-E-HQQE jockey pump, power 1.10 KW-2853 rpm - GRUNDFOS control panelsApprox. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,900 mm, weight approx.: 400 kg ... more information
New in: 2011
used
Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
New in: 2011
used
500 € Description: Volume flow: 320 mÂł/h Max. static pressure: 21000 PA Rated current: 7.0 A Control voltage: 230 V Supply voltage: 230 V Motor power: 1.2 kW Approx. Onsite Dimension. (l x w x h): 600 x 400 x 830 mm, weight approx.: 80 kg ... more information
New in: 2011
used
This PETIG RPS-320 TWIN 3000 punching machine was manufactured in 2011. It features a Siemens 57 numerical control system and comes with a hydraulic unit RKP 23.0 for enhanced operation. The machine includes a linear feed table, switch cabinet, and both infeed and outfeed frames. Its equipped with a tool for punching a slotted hole measuring 20 x 5mm, making it highly effective for precise punching tasks in sheet metal processing. Consider the PETIG RPS-320 TWIN 3000 machine we have for sale. Reach out for more information.
New in: 2012
used
140 € Description: Load capacity 3241 kg, designation number 12113001, further DIN standard guidelines: see photo of operating instructions, including storage boxApprox. Onsite Dimension. (l x w x h): 1,250 x 860 x 680 mm, weight approx.: 250 kg ... more information
New in: 2012
used
200 € Description: including filter cartridges 400 V connection Power 5000 W already dismantled Approx. Onsite Dimension. (l x w x h): 1,700 x 1,000 x 2,200 mm, weight approx.: 300 kg ... more information
New in: 2012
used
450 € Description: Frame trimmer Serial number ,2085 Power 1800W Speed 15m/s Max depth cut 155 mm ,Approx. Onsite Dimension. (l x w x h): 850 x 550 x 400 mm, weight approx.: 25 kg ... more information
New in: 2012
used
1.000 € Description: incl. Air Liquide gas fittings Type: BM350-2UK 300/14 bar, M. KM cable gray P1: 300 bar P2: 12/16 bar Type: BM 352-2 UK P1: 300 bar P2: 6 bar Approx. Onsite Dimension. (l x w x h): 1,250 x 400 x 2,050 mm, weight approx.: 171 kg ... more information
New in: 2012
used
1.300 € Description: with nuts and screw feeder Workpieces : M6 x 15 press-in bolts max. feeding capacity: 15 screws / minute (1-lane) max. filling weight: 100 kg max. filling volume: 25 dmÂł Voltage: 230 V Max. power consumption: 100 VA The workpieces, max. 100 kg or 25 dmÂł, are stored in the sorting machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and fed to the separator. A corresponding transport hose and a blast air nozzle are fitted behind the separator. Only one workpiece at a time is transported through the transport hose. HAN plugs, BUS modules and valve terminals can be used as electrical interfaces.Approx. Onsite Dimension. (l x w x h): 1,008 x 760 x 1,600 mm, weight approx.: 265 kg
New in: 2012
used
Nominal diameter 40 mm, angle valve , 24 V , 2.5 W ... more information
New in: 2012
used
Truck Trailer Mobile Fair BOOTH 180 m2 Utility bottle Year of construction 2012 19 tons Max 39 tons From 120 to 150 standing places Toilets man and woman separated Bar with dishwasher, sink and built-in oven Disabled elevator Assembly or disassembly in 4 hours with 4 people ... more information
New in: 2013
used
1.900 € Description: Fabrication number: 7300-03-000 Operating voltage: 230/400 V Frequency: 50 Hz Control system: SIEMENS SIMATIC Incl. 5 bag filling systems and a distribution belt from the manufacturer BEERApprox. Onsite Dimension. (l x w x h): 20,000 x 2,500 x 5,000 mm, weight approx.: 10,000 kg ... more information
New in: 2013
used
150 € Description: Machine number: 3161 Roller width: approx. 250 mmApprox. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,700 mm, weight approx.: 200 kg ... more information
New in: 2013
used
450 € Description: Power: 500 L/min Nominal output: 100 kW Operating temperature: Side A: 0 /50 TS/°C Side B: 0/50 TS/°C Max. operating pressure on both sides: 10 bar Test pressure: 14.3 PT/bar Volume: 1.5 V/LApprox. Onsite Dimension. (l x w x h): 3,500 x 1,900 x 1,800 mm, weight approx.: 1,000 kg ... more information
New in: 2013
used
Manufacturer: Reitz Ventilatoren Type: MXE 045-021215-00 Year of construction: 2013 Fabr.-Nr: 305472 ... more information
New in: 2013
used
90 € Description: for oil binding agents or other gritting materials Capacity 200 liters Load capacity: 300 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 700 mm, weight approx.: 30 kg ... more information
New in: 2013
used
990 € Description: Machine number: 3160 Incl. SIEMENS drive motor Coil diameter: approx. 1600 mm Incl. manual operationApprox. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 2,200 mm, weight approx.: 1,000 kg ... more information