Manufacturer:
(Category: 1020)
Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...
Steel silo with stand frame, volume 12 m3, payload approx. 19 tons, net weight approx. 2,000 kg, outlet height 1,000 mm, outlet flap NW 250, 1 injection line, 1 vent line, 1 manhole lid NW 500 in cylinder, stand frame with opening 2,000 x 800 mm ... more information
steel plate silo underpassable, volume approx. 8 m3, payload approx. 12 tons, net weight approx. 1,500 kg, outlet height approx. 2,500 mm, outlet flat slider hydraulic, tank open at the top 2,000 x 2,500 mm, footrests pluggable, container underpassable for truck platform, 1 ladder ... more information
Steel silo type WS 12.5, volume 12 m3, payload approx. 20 tons, net weight approx. 2,500 kg, outlet height 1,100 mm, outlet flap NW 250, 1 injection line, 1 vent cable, 1 manhole lid NW 500 in cylinder ... more information
Mini-silo type CB 1000, volume 1 m3, payload approx. 1,600 kg, net weight approx. 290 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eye and forklift holder ... more information
Mini-silo type Piccolo 1.2, volume 1.2 m3, payload approx. 1,600 kg, net weight approx. 300 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eyelets and forklift holder ... more information
Mini-silo type Twinleg, volume 1.2 m3, payload approx. 2,000 kg, net weight approx. 390 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid in the silo roof, crane eyelets and forklift holder. ... more information
steel silos 21 m3 and 29 m3, Payload approx. 40 to, net weight 3,300 kg / 3,900 kg, outlet height 2,050 mm, stand area 2,800 x 2,900 mm, passage width 2,000 x 2,300 mm, outlet flap NW 250,colour s 21 RAL 6005, moss green - shade S 29 RAL 6013, reed green ... more information
8m3 silo, type CB8000, capacity 8 m3, payload approx. 14 to, Total height 4,250 mm, outlet height 1,050 mm, stand area 1,800 x 2,380 mm, Outlet flap NW 250 ... more information
8m3 silo, type CB8000, capacity 8 m3, payload approx. 14 to, Total height 4,250 mm, outlet height 1,050 mm, stand area 1,800 x 2,380 mm, Outlet flap NW 250 ... more information
Small container 1.2m3, capacity 1.2 m3, diameter 1,200 mm, Height 2,040 mm (foot frame inserted), height 2,770 mm (foot frame max. extended)Outlet height 1,150 mm, ... more information
Alternating silo type WSD 18/ 1 bar, capacity approx. 18 m3, net weight approx. 2,900 kg, Stand area 2,500 x 2,500 mm, total height 7,100 mm, cone 60, outlet height 1,300 mm, outlet flap NW 250 Other: Neusilo, blasted, primed, lacquered RAL 9010 (pure white) ... more information
Container mounted on single-axle chassis, e.g. for loose bulk materials, Capacity approx. 2m3, payload approx. 2,000 kg, outlet height approx. 1,000 mm, Filling dome lid ... more information
Settling container, type CB6000, capacity approx. 6 m3, payload approx. 10 to, Dead weight approx. 1000 kg, stand area 1,700 x 1,650 mm, outlet height 1,050 mm, outlet flap NW 250 ... more information
Steel silo volume 18 m3, payload approx. 30 to, net weight approx. 2,500 kg, outlet height 1,300 mm, outlet flap NW 250, 1 injection line, 1 vent line, 1 manhole lid NW 500 in cylinder ... more information
Steel silo volume 18 m3, payload approx. 30 to, net weight approx. 2,500 kg, outlet height 1,300 mm, outlet flap NW 250, 1 injection line, 1 vent line, 1 manhole lid NW 500 in cylinder ... more information
Steel silo type WS 22, volume 22 m3, payload 36 to, net weight approx. 2,500 kg, outlet height approx. 1,100 mm, outlet shut-off valve NW 250 ... more information
Polyester outer silo, capacity 50 m3, diameter 2,800 mm, total height approx. 10,800 mm, cone 60, outlet height approx. 1,000 mm, outlet diameter NW 400 ... more information
Alternating silo WSD 12.5 (pressure silo 2 bar), capacity 12.5 m3, payload 20 to, net weight 2,000 kg, stand area 2,500 x 2,600 mm, outlet flange DN 250, outlet adapter 250/80, ball valve NW 80 ... more information