- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- BDK (1)
- ... more
Manufacturer:
(Category: 1300)
New in: 2015
used
Weight: 1.45t, with Industrial Robot Fanuc M20 iA, max. load: 20kg, the system has been idle for three years already. ... more information
New in: 2005
used
Number of heads: 16, weight: approx. 800kg. Including 4 additional weighing heads with electronics. ... more information
New in: 2008
used
Drill rotational speed: 200-2500/min, drill diameter: 3-8mm, drill length: 30-80mm, max. stacking height: 40mm, connected load: 4.6kW, with documentation. ... more information
New in: 1987
used
One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available. ... more information
New in: 2009
used
The system has limited functionality, the camera has a bug, which leads to longer test times, was used until the beginning of 2023, with calibration plate for the camera. ... more information
New in: 2006
used
The staple fibre plant for sale specializes in the production of regenerated fibres from recycled raw materials and is designed for demanding applications in the automotive and textile industries. With a daily capacity of 35-40 tons per titer range, the plant is designed for two production lines and a downstream belt line with semi-automatic baling press. The production line includes important process stages such as drying and dehumidification, extrusion, spinning, fiber drawing, drawing and crimping, followed by a cutting process and packaging in bales. Extensions and modernizations were carried out, including 5x SCHOLZ dosing systems (2013), 4x extruder screws for line C (2014), 24x spinning pumps for line C (2015), 25x spinning pumps for line D (2016), as well as a conversion of all systems in the sliver line to individual drives from SIEMENS (2015). In addition, various components su ...
New in: 2006
used
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible. ... more information
New in: 2016
used
KUKA robots are used in a wide range of applications, e.g. handling, welding, assembly, packaging and other automation tasks. Payload: 10kg, reach: 900mm, weight: 52kg. On-site inspection is possible. ... more information
New in: 1988
used
Operating temperature: -40 to 180°C, inner dimensions: 320x400mm, length: 950mm, width: 625mm, height: 660mm, documentation available. ... more information
New in: 2004
used
A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available.
used
used
There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.
New in: 1970
used
Connected load: 7.5kW, documentation available. ... more information
New in: 2014
used
A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.
New in: 1988
used
Etikettenlänge: 80-200mm, Gebindegröße: 2-25kg, machine was overhauled in 2018. ... more information
used
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).
New in: 2001
used
New in: 2019
used
Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.
New in: 2006
used
Without software, documentation available. ... more information
New in: 2017
used
2 test facilities with a Yaskawa test robot each are available. Load capacity: 7kg, reach: 927mm, repeatability: ±0.03mm, weight: 34kg. Axis speeds: S-axis: 375°/s, L-axis: 315°/s, U-axis: 410°/s, R-axis: 550°/s, B-axis: 550°/s, T-axis: 1000°/s. Documentation available. ... more information