- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- BDK (1)
- ... more
Manufacturer:
(Category: 1300)
used
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).
New in: 2001
used
New in: 2019
used
Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.
New in: 2006
used
Without software, documentation available. ... more information
New in: 2017
used
2 test facilities with a Yaskawa test robot each are available. Load capacity: 7kg, reach: 927mm, repeatability: ±0.03mm, weight: 34kg. Axis speeds: S-axis: 375°/s, L-axis: 315°/s, U-axis: 410°/s, R-axis: 550°/s, B-axis: 550°/s, T-axis: 1000°/s. Documentation available. ... more information
New in: 2007
used
Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. ... more information
New in: 1999
used
Lifting capacity: 2500kg, lifting height: 5000mm, fuel: gas, operating hours: 19621h, weight: 3865kg. ... more information
New in: 2003
used
X-travel: 2500mm, y-travel: 1000mm, z-travel: 1200mm, software: Metrosoft CM. ... more information
used
There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible. ... more information
New in: 2001
used
New in: 1999
used
The machine was used for punching clay bowls, max. mould dimensions: 200x220mm, pressing force: 6kN, including plastering machine, oiling device and oil tank. ... more information
New in: 2012
used
There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. ... more information
used
Theer are two identical shoe cover machines available, speed: 4 shoes/s, output: 1800 shoes/ roll, length: 778mm, width: 445mm, height: 382mm, weight: 18kg. ... more information
New in: 1998
used
Weight: 1.12t, operational hours counter: 15,840h, with controls, the robot ran in two-shift operation, a second control system in mint condition is still available. ... more information
used
There are twenty identical BIOTEST RCS High Flow HYCON available. ... more information
used
There are eight identical MERCK RCS High Flow Touch available, length: 110mm, width: 130mm, height: 300mm, weight: 1.5kg. ... more information
used
New in: 2003
used
Working area: 200x200mm, spot diameter: 0.16mm, max. speed: 3000mm/s, material: Acrylic, crystal, glass, leather, MDF, paper, plastic, plexiglas, wood, laser power: 30W, control unit CPU: PU Pentium 266MMX 32MB RAM, control unit dimensions: 650x800x1450mm, length: 1750mm, width: 900mm, height: 1400mm, weight: 335kg, including custom made coveyor.
New in: 2005
used
New in: 1991
used
Format: 60-210x105-315mm, max. outer roll diameter: 600mm, power: 0.75kW. ... more information