- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADAM (1)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- Allround (3)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARCUS (1)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- ... more
Manufacturer:
(Category: 1300)
New in: 1965
used
Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. ... more information
New in: 2009
used
The system has limited functionality, the camera has a bug, which leads to longer test times, was used until the beginning of 2023, with calibration plate for the camera. ... more information
New in: 2008
used
There are two identical machines available, year of construction machine 1/ 2: 2003/ 2008, with documentation, were part of a flexo printing machine Fischer & Krecke 16S/10. ... more information
New in: 1978
used
Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. ... more information
New in: 2010
used
X-travel: 700mm, y-travel: 450mm, z-travel: 450mm, max. load: 500kg, table dimensions: 1100x820mm, connected load: 1500VA, weight: 1.02t, with documentation. ... more information
New in: 1987
used
Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible. ... more information
New in: 1999
used
With computer, Windows XP, tray support, 12x feeder base plate and documentation, over the years the following parts have been replaced: placement head (Z-axis), control board placement head, main board laser, all belts, head cable, PC (already with Windows XP), the placement machine last ran in 2020, since then it has been unused, was maintained regularly.
New in: 2010
used
Two identical machines are available, max. speed: 600m/min, min. width 250mm, roll diameter: 200-800mm, roll width: 600-4000mm, thickness: 54-350µm, with documentation and spare parts, has been regularly serviced, on-site inspection is possible. ... more information
New in: 2020
used
As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible. ... more information
New in: 1955
used
used
There are two identical machines available, format: 570x770mm, an inspection is possible. ... more information
used
Format: 570x820mm, an inspection is possible. ... more information
New in: 1972
used
Format: 1000x700mm, an inspection is possible. ... more information
used
New in: 2007
used
Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible. ... more information
New in: 2012
used
Assembly room dimensions: 1020x770mm, table dimensions: 920x690mm, max. PCB dimensions: 690x760mm, connected load: 1500W, length: 2100m, width: 2100mm, weight: 900kg, with feeding of components from belt, bar, belt section, tray and bulk belt, suitable for chips 01005, fine pitch 80x80mm, pitch 0.3mm, BGAs, ÎĽBGAs, CSPs, QFNs, special components such as connectors and wired LEDs, an on-site inspection is possible.
New in: 2014
used
A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.
New in: 1996
used
Measuring range X/Y/Z: 1000mm/1200mm/800mm, measuring head: Renishaw motorized rotary and swivel head with measuring probe model PH10M (without probe), control: Wenzel CNC controller WPC2040/3, software: Metrosoft CM 3.112. Panel: hard stone, panel dimensions X/Y/Z: 2400mm/1440mm/500mm, space requirement: 17m², weight: approx. 5500kg. Including manual control panel, PC and monitor. Documentation available. On-site inspection is possible.
New in: 2004
used
A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available.
used
There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.