- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADAM (1)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLADIN SYRINGE ONE (1)
- Allround (3)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- ... more
Manufacturer:
(Category: 1300)
used
Storey height: 3130mm, usable runner width: 1000mm, step width: 270mm, rise height: 185mm, runner plate thickness: 40mm, runner length: 2430mm, length: 5050mm, width: 2830mm, height: 11,000mm. ... more information
New in: 2020
used
Max. rotational speed: 5000/min, chamfering/ calibration spindle power: 1.5/ 5.5kW, with documentation, an inspection is possible. ... more information
New in: 2016
used
Includes two Rectifying Module BMR Colibrì, with documentation, an inspection is possible. ... more information
New in: 2017
used
Print dimensions: 2000x1000mm, length: 3425mm, width: 815mm, height: 1765mm, weight: 600kg, including loading & unloading equipment, air-conditioned protective cabin and infrared preheating, with documentation, an inspection is possible. ... more information
New in: 2009
used
Max. nominal temperature: 200°C, internal dimensions: 371x415x345mm, capacity: 53l, max. load: 40kg, volume flow: 1-30m³/h, connected load: 1.7kW, length: 744mm, width: 630mm, height: 576mm, weight: 82kg, with documentation and vacuum pump, an on-site inspection is possible, has been maintained regularly
used
Accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible. ... more information
used
Format: 4x 250ml, rotational speed: 200-14,000/min, length: 634mm, width: 550mm, height: 342mm, weight: 80kg, was maintained regularly. ... more information
New in: 2004
used
Process paths (X/Y/Z): 300mm/320mm/100mm, 3-axis interpolated, 16 inputs and 16 outputs, programming control panel, memory card, with CE. ULTRASAVER dosing kit: pressure range: 0-7bar, viscosity: low to high. Cartridge holder for automatic dispensing systems: Holder size: 3cc, 5cc, 10cc, 30cc or 55cc, with spacers. JR-1001 mechanical zero point correction.
New in: 2018
used
Complete automated system with bin-pick cell incl. two cameras for picking up the parts in the bin with Stäubli TX 90XL CS8C controller for handling the parts from the bin. 2x Stäubli RX 160L with one CS8C controller each Östling AIOP marking laser Beckhoff controller for the entire system 2 infeed conveyors for raw parts, 1 outfeed conveyor for e.g. finished parts.
New in: 2005
used
Connected load: 41kW, an inspection is possible. ... more information
New in: 2002
used
Max. load capacity: 1t, with documentation, on-site inspection is possible. ... more information
New in: 2016
used
Max. operating weight: 41t, range: 18,000mm, max. speed: 20km/h, rated power: 160kW, operational hours counter: 18,678h, an on-site inspection is possible. ... more information
New in: 1997
used
Working width: 25-210mm, embossing force: 100kN, heating output: 2200W. ... more information
used
X-travel: 1500mm, y-travel: 800mm, z-travel: 1000mm, clamping table dimensions: 2200x1000mm, software: Metrosoft Quartis, weight: 5.15t, with motor-adjustable PH10M RBE pick-up head, the machine is not functional, the air bearing must be adjusted and the measuring system replaced. ... more information
New in: 2008
used
Motor power: 234kW, weight: 38t, operational hours counter: 25,323h, an inspection is possible. ... more information
New in: 2014
used
Max. solder width: 340mm, connected load: 8000W, an inspection is possible. ... more information
New in: 2005
used
Connected load: 43,000W, including exhaust air box for the fluxing area, tubular fan shaft, 80 soldering frames, various mounting materials, 3 fluxer nozzles, 5 fluxer filters and documentation, an unused PCS-96 control unit is also available, on-site inspection is possible. ... more information
New in: 2019
used
max. soldering width/passage height/board length: 340mm/100mm/500mm. max. wave height: 7mm, solder volume SnPb/SnAgCu: approx. 185kg/150kg, heating time from 20°C to 250°C: approx. 90 min. Preheating zones: 1, preheating power: 3kW, max. preheating temperature: 420°C. Soldering frame transport width: 417mm, transport angle manually adjustable: 6-8°, transport speed min.-max.: 0.3-2.0 m/min. Including 2 soldering frames: Profile: 18mm, lug L: 381mm. On-site inspection is possible.
New in: 2018
used
Cleaning tank: Volume: 80l, 2x filter 20 inch, 5μm. 2 identical rinsing tanks: 60l, 1x filter 9 3/4 inch, 1μm. Drying chamber: max. vacuum: -0.8 bar, 5x 400W stainless steel heating elements. Injection-flood process. Dimensions (X/Y/Z): 1600mm/1000mm/2000mm, empty weight: 700kg. On-site inspection is possible.
New in: 2006
used
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible. ... more information