planing machines used for sale

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

working width: 630 mm; working height: 250 mm; cutter head: Centro Fix; number of blades: 4; height adjustment: elektrisch; read out workpiece thickness: mech. counter; feed speed: variable ca. 6-18 m/min; infeed roller: steehl; outfeed roller: 2 x steehl; table roller: Ja; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1100kg;

Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996 ... more information

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Capacity: 230 x 130 mm.Spindles: 8Bottom 7.5 kW, fence 7.5 kW, near 7.5 kW, 2nd fence 7.5 kW, 2nd near 7.5 kW, top 11 kW, bottom 7.5 kW universal 11 kWGrooved bedCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short piecesAutomatic bed lubricationSpindle diameter: 40 mm.Spindle speed 8000 r/min5 driven feedrollers in table Feed: 6 - 36 m/min, motor 5,5 kWAutomatic hopperfeedTooling not included

Description: • Moulder with Feeder • Serial number 023-2422 • Total installed power 97.25 KW • Working width up to 230 mm • Working height up to 160 mm • Total table length 5400 mm • Entrance table length 1450 mm • 8 heads: bottom 7.50 KW - right 7.50 KW - left 11 KW - right 7.50 KW - top 11 KW - top 11 KW - bottom 11 KW - universal 11 KW • Spindles diameter 50 mm • Spindles rotation speed 6000 rpm • Variable feed speed from 6 m/min up to 36 m/min •  ,WEINIG 814,300 feeder with 90° loader: year of manufacture 2000, serial number 89957, loader length 2750 mm, with 6 loading arms of approx. 1500 mm • Some accessories are includedApprox. Onsite Dimension. (l x w x h): 8,350 x 2,800 x 1,800 mm, weight approx.: 8,000 kg

TECHNICAL DATA: Working width mm: 530 Working height max mm: 300 Number of knives: 4 Feedrate max m/min: 19 Total connection kW: 4 Weight Kg: 800  ... more information

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Planer Paolioni PF500 Year of construction 1996 Manufacturer: Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knife ): 4 Length of dressing table ( total ) 2500mm both adjustable tables Stop angle adjustable electric brake       Diameter of the extraction nozzle 150 mm Motor 4kW, 380 V, 50 Hz Dimensions length x width x height: 2500x920x1050mm Weight 680 kg CE marked Technical specifications are subject to change Surface planer Paolioni PF500 Year of construction 1996 Manufacturer Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knives):  ...

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (split) connection diameter 140 mm dimensions of the machine (L/W/H) 410 / 200 / 180 cm weight ~ 3000 kg

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

Thickness planer Casadei R51/ H3 Year of construction 1997 Manufacturer Casadei / Busselato Italy S/N 97-61-053 Working width: 510 mm Working height Max.: 300 mm Workpiece length min.: 250 mm Working height min.: 4 mm Maximum cut depth: 8 mm Table length: 860 mm Variable feed speed : 6 / 9 / 14 /22 m/min Knife sizes 4 pieces 510 x 35 x 3mm ( standard knife ) Knife head diameter: 120mm Knife head speed RPM 4600 Main motor: 5.5 kW Dimensions: 1120x960x1250 mm Weight: 643 Kg Electromotive height adjustment Feed roller on the table

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Capacity: 220 x 120 mm.Spindles: 5Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kWSpindle diameter: 40 mmMotorised thickness adjustment, motor 1,5 kW digital displayInfeed table1700 mm longSiko reading on the shaft positioningProtective hood with electrical contactExtension 5 x 140 mm ... more information

The machine contains the components from the large-scale series of the powerful WEINIG class Working width 20 – 260 mm / carpentry version Working height 8 – 160 mm 5 working spindles DM 40 mm Long inlet work table - 2000 mm 5 working spindles, bottom 5.5 kW, left + right 7.5 kW, top 7.5 kW, plaster bottom 11 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 – 24 m/min. ATS system: Up to 98 workpiece dimensions can be programmed and called up at the touch of a button Left and upper spindle drive auto. in position Machine in CE design Built in 1998 Without editing tools

Thickness planer, Thickness T 44 from Martin with Tersa shaft Planing width max. 630mm Planing height from approx. 3 to 250mm electrically adjustable, reading via LED display in 1/10mm accuracy, fine adjustment via tip button Drive motor 5.5kW Automatic engine brake 4-knife shaft Tersa with new knives 2 Feed speed 6m/min and 12m/min Rubberized infeed roller and rubberized outfeed roller renewed Articulated pressure beam Planed thicknessing table guided on 4 threaded spindles and guides for optimal stability Low-noise design with soundproof hood Suction nozzle 160mm Emergency stop front and rear Original paintwork, only partially reworked Carpet in original condition V-belt renewed Infeed and pull-out rollers renewed New knives CE Mark Dimensions approx. 1300 x 1150 x 1150mm (LxWxH). Weight approx. 1250kg. The machine can be demonstrated by appointment at our s ...

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

– after technical inspection – year of production 1999 – chrome tops – electronic height setting TECHNICAL PARAMETERS: planing width 230 mm planing height 130 mm electric adjustment of the left head electric adjustment of the upper head electronic height adjustment five steel top rollers one top rubber roller spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW tool diameters 160 and 180 mm pneumatic clamps feed on cardan shafts smoothly adjustable feed 6-20 m/min feed motor power 2.2 kW chrome tops pre-table top length 1980 mm connection diameter 4 x 130 mm dimensions of the machine (L/W/H) 340 / 190 / 200 cm weight 2200 kg

– German production – year of production 1999 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm spindle diameter 40 mm feed 10 m/min feed motor power 3 x 0.85 kW first bottom spindle 4 kW second right spindle third left spindle 7.5 kW fourth top spindle 5.5 kW .max. diameter of horizontal / vertical tools 140 mm / 180 mm two upper steel pulling rollers one top roller rubber pulling one rubber roller in the countertop central lubrication of the table top table top length 2465 mm pneumatic clamps upper head shoe connection diameter 250 mm dimensions of the machine (L/W/H) 360 / 140 / 175 cm weight ~ 1000 kg