planing machines used for sale

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

– German production – year of manufacture 2002 –DTR TECHNICAL PARAMETERS: planing width 230 mm planing height 170 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW spindle diameter 40 mm electric height adjustment five steel top rollers four rubber top rollers pneumatic pressure table top length 1980 mm central lubrication feed adjustable on the inverter 6-26 m/min feed on cardan shafts feed motor power 4 kW connection diameter 140 mm machine dimensions (L/W/H) 520 / 210 / 210 cm weight 4000 kg

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz  ... more information

Equipment/Specifications: Working width: max. 630 mm Knife shaft: Tersa, Ø 125 mm, 4 blades Planing height 2.8 - 250 mm max. chip removal: 8 mm Table length: 1,260 mm Table height adjustment: electric Feed speed: 6/12 m/min Feed rollers: made of rubber Motor power: 5.5 kW Speed 5,000 rpm Power ratings: 400 V, 50 Hz, 3~ Nominal current: 16 A Suction nozzle Ø 160 mm Weight: approx. 1115 kg Dimensions: 1,260 x 1,140 x 1,200 mm 1,800 mm with hood open All information is subject to the actual equipment!

High-performance industrial planing machine In good condition, lots of accessories '  ... more information

SPECIFICATIONS Pre-planer mm: 2000 Number of spindles: 5 Spindle configuration: I below - week 5,5 II - III right- left - KW 7,5 IV above - week 5,5 V below - week 4,0 Cardan shaft Speed-controlled drive KW: 4.0 Spindle diameter mm: 40 Revolutions per minute: 6,000 Max. working width mm: 230 Max. machining height mm: 120 Complete with: - Soundproof cabin - Grooved table -Tools CE-compliant

High-performance planer With chamf device good condition 223 kW Year of construction 2003 Many spare parts  ... more information

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

Planer WEINIG UNIMAT SUPER 4 – German production – very good condition – year of manufacture 2004 –DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools adjustable top head 1) bottom head 11 kW 6000 U/min 2) top head 18,5 kW 7000 U/min 3) bottom head 5,5 kW 6000 U/min feed motor 2,2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic pressure three upper fixed pulling rollers one rubber top roller corrugated top length of the pre-worktop 1950 mm total power 37 kW central lubrication Trzansport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Year of manufacture: 2004 Planner: High-speed Moulder/Planer Waco Maxi Working height: 14 - 150 mm Working width: 30 - 300 mm Complete moulder line with High-speed Moulder/Planer Waco Maxi and mechanization from Almab Planer/Moulder: - High-speed Planer/Moulder: Waco Maxi - Year of manufacture: 2004 - Feed speed: 30 - 350 m/min - Spindles: 7 Technical description: - Working width: 30 - 300 mm - Working height: 14 - 150 mm - Cutting circle: 180 - 260 mm - Combination: bottom/top/left/right/top/bottom/bottom - PLC system: Siemens - Weight: 16 500 kg

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

Description: Serial Number: 120616 Working dimensiones: 2610 mm Working width: 400 mm approx Installed Power: 22kw Approx. Onsite Dimension. (l x w x h): 1,100 x 1,300 x 1,600 mm, weight approx.: 115 kg ... more information

I sell the four-sided planer FUTURA PRG24/7, Year of construction 2005. Element size max. 260x150mm ! 7 Spindle Configuration: Bottom 7,5kW (10HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Top 7.5kW (10HP) / 6000 rpm Top 6.75kW (9HP) / 6000 rpm Right 6,75kW (9HP) / 6000 rpm Universal 7,5kW (10HP) / 6000 rpm Combined power 62KW / 102 A Weight 4500kg. Element size max. 260x150mm ! 2 FABA planing heads with spiral knife fi.140x260x40mm included in the price. Electronic programming for working width, working height and the height of pressure zone Feed speed adjustable with inverter. 2-zone pneumatic material pressure system for feed Available the same.

Part Number 6322 TECHNICAL DATA - max width of the workpiece 260mm - max height of the workpiece 160mm 6 spindles: 1) horizontal bottom 260mm 7,5kW 2) vertical right 160mm 7,5kW 3) vertical left 160mm 7.5kW - 3 spindles electrically adjustable front/rear 0.4kW 4) horizontal top 260mm 11kW - 4 spindles electrically adjustable up/down 0.4kW 5) horizontal bottom 260mm 7,5kW 6) universal 230mm 7,5kW - universal spindle electrically adjustable up/down - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 1,2,3,4,5 50mm - universal spindle diameter 40mm - from above 6 pulling, toothed, metal, torsional introductory shafts, including 2 double - from above 5 pulling leads shafts, rubber, smooth including 3 double - from the bottom from the side of the pressure on the inlet - from below 2 pulling, metal, toothe ...

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!  ... more information

working width: 530 mm; working height: 250 mm; cutter head: strip knife; number of blades: 4; height adjustment: electrically; read out workpiece thickness: digital; feed speed: 2 speeds; infeed roller: steel; outfeed roller: steel; table roller: no; motor power: 5,5 kW; suction connection: 140mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 900kg;

Description: Serial number: 10404-000243 Rated power: 1500 W Nominal speed: 9000 rpm Table dimensions: 740 x 210 mmApprox. Onsite Dimension. (l x w x h): 780 x 450 x 450 mm, weight approx.: 30 kg ... more information

Heavy high-performance planer designed for maximum feed performance and productivity. Designed for rough use in planing and sawmills. Suitable for the processing of planed goods and slats. Special features: Left version. for wood widths up to 360 mm. Machine we sell as used. But the machine never ran. Electrical part still has to be built by Ledinek - here adjustments are possible (axe positioning, FU-s, 400V or 480V etc.). Price is for the variant in the PDF description. Adjustments on request. Drive motors available.

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.