boring mills, machining centers used for sale

bore capacity in steel (diameter): 30,0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 225 - 4.300 U/minengine output: 1,0 / 1,6 kWcolumn diameter: 115 mmweight: 260 kgMachine height: 1.790 mmFurnishing:- stepless speed adjustment- Reversing switch for R / L run- digital speed display- Connector and cable mounted- Spindle protection with electr. validation- 2 mtr. Connection cable with plug 16AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55,0 mmthroat: 300 mmbore stroke: 120 mmthreading: M 36 in St 60turning speeds: 70 - 1.200 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0,10 + 0,30 mm/Uweight: 380 kgMachine height: 1850 mmFurnishing :- automatic feed- Feed device 0.1 + 0.3 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validationincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0 (Thread cutting with stop)- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40,0 mmthroat: 300 mmbore stroke: 160 mmthreading: M30 in St 60turning speeds: 100-1600 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0,1-0,2-0,3-0,4 mm/Uengine output: 1,8/2,9 kWweight: 450 kgMachine height: 1865 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed rates 0.1-0.2-0.3-0.4 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plate- Motor 1.8 / 2.9 KW - 100 - 1600 rpm.Special accessories included:- LED machine light pos. 12.- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device A pos. 24. (Coolant base plate, complete)- digital drilling depth display pos. 37.1 (5-digit LED display)The data for this ad was created with ModulMWS - the so ...

bore capacity in steel (diameter): 23,0 mmthroat: 250 mmbore stroke: 100 mmmorse taper: 2 MKtable:: 370 x 300 mmturning speeds: 225 - 4.300 U/minengine output: 0,6/0,95 kWcolumn diameter: 90 mmweight: 175 kgMachine height: 1770 mmFurnishing :- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Motor protection switch- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Connection plug (fully assembled, cable length 2m)- Spindle protection with electrical fuse- Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40,0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 160 - 2.250 U/mincolumn diameter: 115 mmfeed: 0,10 + 0,20 mm/Utotal power requirement: 1,45 / 1,9 kWweight: 285 kgrange L-W-H: 0,5 x 0,8 x 1,84 mmFurnishing:- autom. Feed 0.10 + 0.20 mm / rev- stepless speed adjustment- Short spindle MK 3- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Digital speed display- Feed overload protection- Spindle protection with electrical fuse- 2 m cable with plug 16A- Operating instructions in Germanincluding special equipment:- Coolant device B pos. 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2500x1300x160 mmNumber of spindle head vertical: 1 St.Number of spindles head horizontal: 0 St.Number of tools: 16 St.Year: 2023 Weight: 1500 kgDimensions (L/W/H): 3400x2250x1900 mmMotor output: 2,2 kWControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Column Drill Ayen mobile Branch Flick Head Drill head for window olives Extension for drill chuck Stops on both sides Depth gauge The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Drill-Press-Automat Grass Pot hinge bore The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Horizontal drill head S/R left driven taken from a scm Tech 99 when it was scrapped  ... more information

Radial table drill Weibert SB3116RMN Bench drill Drilling spindle holder MK2 / MT2 Drilling spindle speed in min-1 (5) 500-2500 Quill stroke 80mm Column diameter 60mm Motor power 900W 400V 50Hz Table size 220x220 mm Drilling capacity 16 mm Projection 130-420 mm Gross weight 45kg  ... more information

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM

pot hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: in the pictures -Dimensions: 4000/1100/H1800 mm ... more information

Wood step drills, wood drills, countersinks, end mills, drill holders, click quick-change chucks -for: Line drilling machine, fitting drilling machine -from: a wood workshop -15 kg: milling cutter, drill bit, countersink, click quick-change chuck ... more information

Drill stand, drill stop, drill press stand, drill jig, drill bushing jig-Quick release device-Max. Height: 100mm-Dimensions: 400/240/H220 mm-Weight: 22 kg ... more information

Line drilling machine, multi-spindle drilling machine -1x motor defective - pneumatically exciting -Max. Drilling distance: 1000 mm -Drive: 0.36 kW 2800 rpm -Weight: 280 kg ... more information

Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 8x drill heads available -Price: per piece -Dimensions: 700/120/H150 mm -Weight: 11 kg/piece

Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available -Price: per piece -Dimensions: 470/120/H150 mm -Weight: 7 kg/piece

Multi-spindle head, multi-spindle drill head, dowel drill head, fitting drill head -Dimensions: 190/85/75 mm -Bore distance: 26 mm -Middle drill: 5 mm offset -Number: 1x drill heads available -Price: per piece -Weight: 2 kg/piece ... more information