boring mills, machining centers used for sale

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Biesse , Type: Rover 24, Year: 2002, Software: Compass kann mit gekauft werden, B-axis: 100/50/20, Maschinensteuerung: 6170, Programming station office: 1380, Work piece width min-max mm: 150, Min.-max. workpiece length in mm: yes, Aluminium processing: 1, Throuh running machine: HSK F-63, Feeding speed max m/min: 7.5, Pendulum processing: 1800-24000, Number of milling spindles vertical: 1, Tool adaption system: 24, Milling engine 1 hours power: 8, rpm 1): 7, Milling engine 2 hours power: 4, rpm 2): 2, Working widht max mm: 2, Vertical drills-X: 10, Drill vertical Y: yes, Horizontal drills-X: yes, Drill horizontal Y: 100, Aluminium sleeking table: yes, 4 station allocation: yes, Rigging support table: yes, Edgeband hight mm: yes, Radial arm machine: 1 Winkelgetriebe, machine ready for demonstration: Deckenlaser und Hubschwingen, Year :2002

Manufacturer: IMA mit Verleimung, Type: GX30/E/130/430, Year: 2014, Control: IMA, Software: IMA Woop 10, Barcode: möglich, Maschinensteuerung: IMA Woop 10, Programming station office: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, C axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, Number of milling spindles: 1, Tool adaption system: HSK F-63, rpm 1): 1000-24000, Number of tool changers: 18, Tellerwechseler: 1, Pickup Wechlser: 1, Mitfahrender Werkzeugwechsler: yes, Working widht max mm: 1400, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 2 X 120, Saw unit: yes, Edgebanding unit: yes 2 Fach Rolle, Edgeband hight mm: 55, Magazine Qty:  ...

Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010 ... more information

Manufacturer: Reichenbacher, Type: Vision 2 Sprint, Year: 1999, Control: Simumerik 840 D, Working range X: 6140, Working range Y-axis: 1600, Working range Z: 480, Feeding speed max m/min: 60, Pendulum processing: yes, Number of milling spindles: 4, Milling engine 1 hours power: 4,8, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 160, Year :1999

 ... more information

Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994

 ... more information

 ... more information

Manufacturer: IMA, Type: BIMA 610 V, Year: 1998, Software: IMAWOP 5.0, Programming station office: IMAWINCAD , Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Pendulum processing: 2 x 1.750, Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Year :1998

 ... more information

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991

Manufacturer: MAW, Year: ca.1990, One or two Spot machine: Einzelplatz, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 800, Number of units: 1, Clamping system: yes, Wight approx. kg: 400, FREE TEXT: mit Luftkissentisch Anschlagsystem, Year :ca.1990

Manufacturer: IMA, Type: BIMA 610-2H, Year: 1996, Control: num, Working range X: 7000, Working range Y-axis: ca. 1150, Working range Z: 200, C axis: no, Number of milling spindles vertical: 2, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-24000, Milling engine 2 hours power: 7,5, rpm 2): 1800-24000, Tellerwechseler: yes, Number of tools per tool-magazine: 2 X 12, Mitfahrender Werkzeugwechsler: yes, raster table: yes, 4 station allocation: 8, Vacuum pumps m³/h: 250, Werkstückspannsystem: schablone, machine ready for demonstration: yes, Year :1996

SPECIFICATIONS: 5-axis joinery system Cross-sectional sawing unit Maximum working width in mm: 6,250 Load from mm: 11,000 Discharge from mm: 6,500 Vertical/Universal Milling Machine - Vertical Drilling Unit Horizontal Drilling Unit/Horizontal Milling Machine mm 600 Beam turning station

Number of boring motors: 1 St.boring of corner bearing 1=yes, 0=no: 1 0boring of olive 1=yes, 0=no: 1 0length: 2600 mmwidth: 800 mmheight: 1.250 mmHess corner bearing and olive drilling machine----------------------------------- Stable base frame as a support wall- precise support made of abrasion-resistant and dimensionally stable plastic for frames and sashes up to 100 mm thick- Corner bearing and olive drilling in one machine and in one Drilling unit- easy and comfortable vertical work- easy handling - no templates, minimal Time required for safe workpiece positioning, Guarantee for exact and precise holes- 2 clamping cylinders for immovable fixation of sashes or frame adjustable to different wood thicknesses- Lateral stop in the rebate for the corner bearings- Ergonomically arranged stop system for olive drilling with 14 hinged stops and additional color markings- fixed stop sy ...

Code: 0094 Brand: SCM Model: RECORD 110/S - CE Standard CNC working centre for doors, windows, furniture, arches and various - CE Standard - Year 2006 Technical data: X axis stroke mm 2990 - Speed 60 M/S Y axis stroke mm 1720 - Speed 45 M/S Z axis stroke mm 400 - Speed 25 M/S Working range X mm 3500 Working range Y mm 1815 Workpiece passage mm 155 Electrospindle Kw 7,5 18000 rpm Tool attachment HSK 63 Automatic tool changer with 12-position "RAPID 12" UNIVERSAL K2 power unit fixed for horizontal working Bar table with suction cups : N° 6 TV tables with displays N° 2 workpiece loading aid lifters Vacuum pump 250 m³/h (5,5 Kw) Conveyor on electrospindle to eliminate chipboards and dust XYLOG operator interface CNC managed by PC with WINDOWS interface Suction N° 2 mouths diameter mm 150 Compressed air 7/8 bar Machine overall dimensions: Length mm 3710 - Wi ...

BIESSE ROVER K FT machining center Manufacturer: BIESSE Model: ROVER K FT Year of production 2017 Additional information: Electrospindle: 1 pc. Main engine: 9 kW Tool magazine: 14 positions Vertical drills: 10 pcs. Machine table: raster Software: BIESSE B_SOLID Number of revolutions: max. 24,000 rpm Handles: HSK-F63 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos.

Number of boring spindles: 21 St.Boring depth max.: 80 mmMotor output: 2,2 kWWeight: 420 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...