subcategories
(3rd category level)
Manufacturer:
(Category: 205)
Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)
- 2 drill beams with 26 spindles each - Width adjustment by electric motor - 2 motors of 1.5 kW each ... more information
Recording ISO 30 Connection BIESSE and possibly MASTERWOOD Ratio: approx. 1 : 0.7 Saw blade holder 35 mm, with side hole approx. 6 mm on pitch circle 50 mm Max. saw blade diameter approx. 165 mm BIESSE No: 9405A056 ... more information
Connection HSK F63 IMA Ratio 1:1 max. speed 12,000 rpm Cutter holder for collet ER 25 Saw blade holder bore 30 mm Swivel infinitely adjustable 0 – 90 degrees with fixed points at 0, 22.5 and 45 degrees ... more information
Connection IMA – HSK 63F Gear ratio 1:1 Max. speed 14,000 rpm Bore for saw blades or disc cutters 22 mm Tactile diameter. inside approx. 130 mm Note: Plastic coating probe ring is missing Sensing distance approx. 5 mm ... more information
I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same. ... more information
BIESSE ROVER K FT machining center Manufacturer: BIESSE Model: ROVER K FT Year of production 2017 Additional information: Electrospindle: 1 pc. Main engine: 9 kW Tool magazine: 14 positions Vertical drills: 10 pcs. Machine table: raster Software: BIESSE B_SOLID Number of revolutions: max. 24,000 rpm Handles: HSK-F63 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos.
Technical Details: - X axis working area: 5300 mm - Y axis working area: 1300 mm - Working Table Pod and Rail - Main Electrospindle power: 9 KW - Number of controlled axes: 5 axes - Total number of drilling spindles: 32 - Total number of tool changer positions: 8 ... more information
Technical Details: - X axis working area: 3050 mm - Y axis working area: 1250 mm - Main Electrospindle power: 10 KW - Number of controlled axes: 3 axes - Total number of drilling spindles: 25 - Total number of tool changer positions: 4 ... more information
I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.
PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V ... more information
automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2
Dear customers currently we offer you a refurbished columns or column drilling machine from F. Zimmermann for sale. The special feature of the machine is the work table adjustable in 3 levels. Here are the other technical data of the machine: Speeds: 100 - 2,250 rpm Work light MK3 recording (new) Swivel radial: 360° Swivel axisial: 2x 90° Quill stroke: 160 mm Projection column spindle center: 500mm Table: 490 x 400 mm Centering disc Ø: 55 mm H7 working height swivel table: 715 mm working height base plate: 1,215 mm Base plate and table with T-slot 12 mm Dimensions: 600 x 1,120 x 1,930 mm Power: 1.5 kW Weight: approx. 500 kg After the overhaul, the machine has a completely new electrical system including engine brake, is painted light grey in RAL 7035 and comes with a drill set. We look forward to your questions and inquiries! If you have any questions, please ...
AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.
AUTOMATIC BORING MACHINE Type VITAP 212 n.02 boring heads ( n.21 mandrins each one ) horizontal and / or vertical boring pneumatic tilting lateral reference fences 45° deg. horizontal boring Technical Details : n.21 mandrins ( x2 ) centre distance between mandrins mm. 32 mandrins rotation speed rpm 2800 n.02 motors Hp 2 each one net weight kgs. 600 Volt. 380/50
BORING MACHINE Type VITAP ALFA 21 n.21 mandrins motor power Hp 2,5 ( Kw 1,8) titltable head by pneumatic movement vertical or horizontal boring CE mark : YES volt. 380/50 ... more information
CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50 ... more information
Load Weight Shelf: 30000 kgLoading weight per level: 3000 kgNumber of load levels: 2 x 5 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information