boring mills, machining centers used for sale

bore capacity in steel (diameter): 25 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 2240 U/min: mmtotal power requirement: 0,75 / 400 kW / Volttool taper: 2 weight of the machine ca.: 80 Kgdimensions: 0,5 x 0.3 x 1000 mmBench drill- Left/right rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 15000 kgLoading weight per level: 3000 kgNumber of load levels: 5 Stk.Recommended material length: 6000 mmColumn width: 2 x 2000 mmShelf height: 2440 mmdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

bore capacity in steel (diameter): 13 mmthroat: 175 mmbore stroke: 60 mmturning speeds: 480 - 4000 U/min: 230 x 220 mmtotal power requirement: 1,0/ 400 kW / Volttool taper: 2 weight of the machine ca.: 90 Kgdimensions: 0,5 x 0.3 x 0,85 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 155 mmbore stroke: 80 mmturning speeds: 50 - 3100 U/min: 310mm mmtotal power requirement: 1,5 / 400 kW / Volttool taper: 2 weight of the machine ca.: 70 Kgdimensions: 0,6 x 0.4 x 9,9 mmBench drill- Rotating and swiveling tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 3 MKtable:: 500 x 350 mmcolumn diameter: 105 mmturning speeds: 75 - 3010 U/mintotal power requirement: 0,9 / 1,2 kWweight of the machine ca.: 235 kg.range L-W-H: 1740 x 670 x 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 28000 kgLoading weight per level: 2000 kgNumber of load levels: 2 x 7 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: 3,7 x 2,55 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

bore capacity in steel (diameter): 40 mmthroat: 330 mmbore stroke: 190 mmspindle taper MT: 4 MKtable:: 500 x 400 mmcolumn diameter: 140 mmturning speeds: 90 - 1500 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 435 kg.range L-W-H: 570 x 930 x 2170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1700 mmy-travel: 400 mmz-travel: 400 mmControl: Siemens 480 D table width: 500 mmtable length: 2000 mmtotal power requirement: 16,25 kWweight of the machine ca.: 4750 kgdimensions of the machine ca.: 3000x 2500x 2800 mMachine number 9599- 4th axis / horizontal / diam. 315 mm- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

bore capacity in steel (diameter): 12 mmthroat: 220 mmbore stroke: 60 mmthread capacity: 6 Mcolumn diameter: 70 mmbore spindle turning speed range: 120-6000 U/mintable-size: 300x250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 93-1420 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

working area: 5-40 x 1.000 mm- - -: - - - - - -- - -: - - - - - -Deep hole drilling machine | TIBO - tibo. E 40-1-1000The machine is in a very well-maintained condition.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: tibo E 40 1 1000 | tibo E40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron: 36 mmspindle taper MT: 3 spindle turning speed - stepless: 140 - 1400 U/mintable-size: 500 x 360 mmcolumn diameter: 125 mmtotal power requirement: 1,5 kWweight of the machine ca.: 335 kgdimensions of the machine ca.: 500 x 800 x 1850 mmThe machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.Accesories:- Drill chuck- infinitely variable speeds- lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 210 mmbore stroke: 110 mmspindle taper MT: 3 speeds: 10 von 140-1800 U/mintable-size: 320 x 400 mmcolumn diameter: 100 mmdrill diameter: max. 31 mmDistance spindle/table max.: 710 mmtotal power requirement: 1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,4 x 0,7 x 1,73 mElectric 380 Volt: Column drilling machine with manual feed, speed regulation viaStep discs and 2-stage motor as well as spindle right - left rotation.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 322 mmbore stroke: 165 mmspindle cone MT: 3 table-size: 336 x 535 mmcolumn diameter: 105 mmspeeds: 8: 100- 2400 U/mintotal power requirement: 0,9/0,75 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 0,6 x 0,7 x 1,75 mElectric 380 Volt: Gear drill with manual feed, 8 speeds, 2-pole motor, right-left rotation, drilling stroke with scale and table height adjustable via crank.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 315 mmbore stroke: 200 mmtaper MK: 4 speeds: 12: 56-1120 U/minbore capacity in cast iron: 50 mmtable-size: 700 x 450 mmDistance spindle/table max.: 710 mmtotal power requirement: 4/3,43 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,14 x 0,7 x 2,58 mElectric 380 Volt: Thread cutting device: Croll-moving table: Vice: BB 175 mmHeavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm.Machine dealer with own stock of 1600 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 500 mmz-travel: 400 mmcontrol: 432 spindle taper ISO: 40 turning speeds: 20-6000 U/minTool changer: 24 total power requirement: 35 kWweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,6x3x2,925 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 800 mmz-travel: 900 mmcontrol: HEIDENHAIN type: TNC 530 itnc mmrotary table dia.: 600 mmspindle taper: HSK 63 turning speeds: 18000 U/minworkpiece weight: 3000 kgTool changer: 30 Pos.: table - swivable: Gradtotal power requirement: . kWweight of the machine ca.: 12 tdimensions of the machine ca.: . mDEPO DYNAMIC 1009• X axis(milling unit/cross slide move across): 1,000 mm• Y-axis (crossbar moves lengthways): 900 (+170) mm• Z-axis (milling unit moves vertically): 600 mm• Feed / rapid traverse X, Y and Z axis: 40,000 mm/min• Acceleration X, Y and Z axis: 5 m/s2• Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm• Distance spindle nose / clamping surface: max. 750 mm• Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle)- Electronic hand wheel• Chip disposal• Air supply through the inner spindle (ILZ)• Workroom enclosure complete wit ...

x-travel: 600 mmy-travel: 400 mmz-travel: 600 mmControl: Heidenhain type: 410 M mm: elktr. table surface area: 750x450 mmdistance spindle /table: 690 mmTable load: 500 kgspindle taper ISO: 40 Cooling through the spindle: barturning speeds: 9000 U/minspindle motor: 7,5 kWtotal power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.