boring mills, machining centers used for sale

number of spindles: 12 bore capacity in steel (diameter): 20 mmbore stroke: 100 mmtotal power requirement: 9 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 1,5 x 1,5 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

C.W. Kreher Söhne KG slotted hole drilling machine LBFM Product name: Slotted hole drilling machine Type: LBFM I and II Manufacturer: C.W. Kreher Söhne KG Machine number: 4638 Year of construction: 1963 Condition: used, revised, checked Technical details: • Table size: 600 x 250 mm • Absorption sizes of the two-jaw chuck: • max. drilling depth: 160 mm • Max. travel in width: 200 mm • Height adjustment: 200 mm • Max. speed: by flipping the belts 2 speeds: 1,500 rpm and 2,800 rpm • Stop for 2 drilling depths • Clamping device: mechanical hold-down devices • V-belt dimensions: 15 mm x 970 mm • Weight: approx. 500 kg Special features: Instruction manual available Engine data: • Voltage: 380 V •Turn: • Current: 6.1 A • Power: 1.6 kW Machine dimensions (L x W x H): 1,200  ...

- Machining width max. 800mm - Workpiece thickness Max. 80mm - for further technical data see PDF  ... more information

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Working length: 1,800 mm equipped with: -2 drilling units with three drills -Insertion device for pot hole hinges -2 Bohraggregte for hinges, etc.  ... more information

Dowel Hole Drilling Device: Yes; Drilling depth: 145 mm; Slotted hole length: 240 mm; Height adjustment: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 200 kg; Solid slotted hole drill with 1 lever operation.

BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm

Manufacturer: Koch, Type: DL 80, Year: 1982, Control: Elektrisch, Work bays: 1, Work piece thickness mm: 40, Werkstücklänge mm: 180-2500, Work piece depth mm: 800, Work piece thickness mm: 40, Feeding speed m/min: 60, Mittenunterstützung: yes, Lochraster: 32, Beleimwerkzeuge: 12, Dovel insertion: yes, Work piece clamping: pneumatisch, Work stations: 1, Wight approx. kg: 3000, Year :1982

Description: Maximum workpiece size: 600 mm . Table depth: 320 mm Spindle Quantity: No. 35Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,500 mm, weight approx.: 700 kg ... more information

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984

Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Drilling machine Brand: Flott Type: TB 10 Year: 1985 Drilling depth 23 mm Motor power 0,52 kW 380 volt 50 Hz 1,6 ampere Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding. ... more information

table diameter: 500 mmtable load: x ttable height: x mmspindle diameter: 0 mmx-travel: 500 mmy-travel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe section for spindle work (fluting, carving). Unit complete with extra parts and lots of tooling.

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.  ... more information

Description: 3 spindles Crosscut saw Glazing bead saw Working width min/max: 30/220 mm Min/max working height: 30/100 mm Working length min/max: 330/2600 mm Spindle power: 7.5/12 kW, Saw: 35 kW Spindle speed min/max: 2800/7000 rpm Spindle section: 40 mm Cross clamping length Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 3,500 x 4,500 x 2,300 mm, weight approx.: 4,000 kg