subcategories
(3rd category level)
Manufacturer:
(Category: 205)
Manufacturer: IMA , Type: BIMA 810 V, Year: 2000, Control: IMATRONIC, Software: IMAWOP, Working range X: 5200, Working range Y-axis: 1600, Working range Z: 180, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 11, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 2 x 100 , Edgebanding unit: yes, Edgeband hight mm: 55, Year :2000
Description: MULTIAX C113/REX CNC Machining Center 3 axis changing units - yes control - to be confirmed drilling spindels horizontal y-axis - yes drilling spindels vertical x-axis - yes drilling spindles horizontal x-axis - yes drilling spindles vertical y-axis - yes Nesting machining - Flat table Rexilon path-feed rate max. X-axis - 60 mts/min path-feed rate max. Y-axis - 60 mts/min path-feed rate max. Z-axis - 30 mts/min vacuum pump - 1 vacuum pump: 1 mÂł/h, path-feed rate max. X-axis: 60 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 30 m/min, changing units: yes, control: to be confirmed, Approx. Onsite Dimension. (l x w x h): 4,900 x 2,800 x 2,700 mm, weight approx.: 4,500 kg
Description: ⢠CNC machining centre (3-axis) ⢠Serial number AL5632 ⢠Total installed power 20 KW ⢠Working area approx. 2600 x 1150 mm ⢠Panel passage height 180 mm ⢠Travelling way X-axis: approx. 3000 mm, Y-axis: 1465 mm, Z-axis: 280 mm ⢠Maximum travel speed in the axes direction x-y-z: 50-40-22.50 m/min ⢠Tool magazine with 10 positions (some elastic nippers are broken) ⢠Electro spindle SCM ISO-30-LD: power 6.60 KW, automatic tool change, for ISO 30 tool holder ⢠Vertical milling group 6.60 KW-max. 12000 rpm, manual tool change ⢠Saw unit to groove in X direction ⢠Vertical drilling spindles in X-axis direction: 9 ⢠Vertical drilling spindles in Y-axis direction: 7 ⢠Horizontal drilling spindles in X-axis direction: 2 + 2 ⢠Automatic lubrication ⢠Remote control panel ⢠8 consoles with 22 vacuum suction cups total ⢠4 lifting modules for heavy wo ...
Manufacturer: Morbidelli, Type: Author 600, Year: 2000, Working range X: 4400, Working range Y-axis: 1300, Number of milling spindles: 2, Tool adaption system: ISO 30, Milling engine 1 hours power: 10 PS, Milling engine 2 hours power: 9 PS, Number of tool magazines: 1, Number of tools per tool-magazine: 10, Horizontal drills-X: 6, Traverse table: yes, Vacuum pumps Qty: 1, Vacuum pumps m³/h: 100, Drill vertical: 18, Radial arm machine: yes, Year :2000
Manufacturer: Hoffmann, Type: DEA, Year: ca.2000, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Glue high-pressure pump: Niederdruckbehälter, Glue quantity setting: yes, Dßbeln horizontal: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, DßbelgrÜsse mm: 8 X 30, FREE TEXT: Maschine wird gereingt und geprßft vor Auslieferung, Year :ca.2000
Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf<CRLF>ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stßck 3 Spindeln, Drill gearing ...
BIESSE TechnoLogic through-hole drilling machine Drilling on 4 sides ... more information
Working range X mm: 7200 Working area Y mm: 2010 Working area Z mm: 300 No. 2 working areas mm: 2700 x 1500 Main motor kW: 11 Tool change stations 12 Machine table: console table Speed max rpm: 18000 Tool clamping system: HSK 63F Number of consoles 8 Vacuum pump: Yes Total connection kW: 78 Weight Kg: 12,300
Masterwood Italy CNC Ventilation Center for Door and Window Production Type Woodmaster ATLAS Built in 2000 SN 00120018 for the processing of solid wood and panel material, etc. Working strokes of the axles: X Axis 3900mm Y Axis 1785mm Z- Axis 630mm Workspace X Axis 3500mm Y Axis 1210mm Z- Axis 210mm Max speed of axles 60-50-20m/min 6 edition consoles Workpiece clamping device Electric main spindle with ISO 30 intake 6.8 kW 24,000rpm Saw unit integrated in the work unit Automatic change of tools 18 positions Numerical control SINCRO with industrial PC and keyboard Safety tread mats Vaccum Pump Total required power 27 Kw Care pressure 6-7 atm Compressed air consumption per arebit cycle 200-300Nl/min Suction speed 25-30m/sec Air consumption 5000m3/h 400 V/ 50 Hz Weight 4500 Kg Technical information subject to reservation
Console table with LED suction cup position indicator, 8 manually movable consoles, each with 2 vacuum cups, 4 support rails Workpiece clamping via vacuum pumps 2100mÂł/h Working area X 5000 mm, table version for 4 places in X Working range Y 1200 mm Working range Z 125 mm Drill head â vertical 16 drilling spindles, touch probe Main spindle 7.5 kW with C-axis 360 grd. and 18-fold tool changer Adapter units included: â 4 spindly crossheads, â Groove saw unit Chip conveyor belt with chip ejection belt CNC path control IMATRONIC with IMAWOP DXF Interface Complete Machining Deluxe The pictured tools, HSK tool holders, drills, etc. are not included in the scope of delivery!
Manufacturer: Bßrkle Hymmen, Type: Lackierstrasse fßr Faserzementplatten, Year: 1993-2001, Finished product: Decklackierung, Work piece width min-max mm: 30-1300, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 10-25, Dßsentrockner1: Vorwärmung, Lackwalze 1: Hymmen TLX, IR-Trockner 1: 6 Lampen, Lackwalze 2: Hymmen TLX, IR-Trockner 2: 6 Lampen, Lackwalze 3: Hymmen TLX, UV Trockner 3: 3 Lampen 80 watt, Year :1993-2001
x-travel: 2100 mmy-travel: 720 mmz-travel: 600 mmspindle taper: SK 40 turning speeds: 30 - 8000 U/minno. of workpieces in the magazine: 30 StĂźcktable surface area: 2800 x 650 mmtable load: 2500 kgtable height over floor: 900 mmrapid travel x/y/z: 30 m/minfeed speeds: X/Y/Z 0 / 30000 mm/mintotal power requirement: 25 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 5500 x 3400 x 3100 mmCNC traveling column machining center HedeliusFurnishing:- HEIDENHAIN control TNC426- chip conveyor- Coolant system 350 / 2.5 bar- Working area hoodMachining values:- max. milling capacity: 600cmÂł/min- max. drilling Ă: 44 mm- max. thread Ă: M30operating hours:- control on = 68283 hours- machine on = 67782 hours- program run = 20891 hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 400 mmz-travel: 600 mmControl: Heidenhain type: 410 M mm: elktr. table surface area: 750x450 mmdistance spindle /table: 690 mmTable load: 500 kgspindle taper ISO: 40 Cooling through the spindle: barturning speeds: 9000 U/minspindle motor: 7,5 kWtotal power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2050 mmy-travel: 1100 mmz-travel: 800 mmControl: Fanuc 18iM Super Cap II turning speeds: 60-6000 U/mintool magazin:: 60 tool taper: BT50 total power requirement: 26 kWweight of the machine ca.: 23,6 trequired space: 6,3 x 3,3 x 3,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001
Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze fĂźr zum NachrĂźsten vorbereitet, Year :2001
Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch ...
Description: SPECIAL FOR DOORS ⌠Machining range : - X: 2500 mm Y: 1360 mm Z: 100 mm (part passage 120 mm) ⌠a-FORWARD position: - Horizontal unit with 1 output 2.2 kw - Electrospindle 8 kw in ISO30 - Front rotary tool magazine 8 positions ISO30 ⌠P-REAR position: - Horizontal unit with 1 output 2.2 kw - 14-position ISO30 rotary tool magazine on the carriage -Indexing head on X/Y plane, manual tilting - 8 kw frequency inverter - CE standards - Belt table - Chip evacuation belt - Vacuum pump 100m3/ h - Windows PC with SINCRO' control Machine sold without tools or accessoriesApprox. Onsite Dimension. (l x w x h): 6,700 x 2,300 x 2,400 mm, weight approx.: 4,200 kg
Description: 19-core drilling head - Saw for longitudinal cuts - Inverter-driven drilling head - 5-axis bi-rotary milling unit - HSK 63F 22-position tool magazine on carriage side - HSK 63F 5-position side-mounted tool magazine - Tubeless table - 08-bar tubeless table - 6 rear stops + 2 side stops for counterplate panels - Pre-positioning kit to lock hangers for 8 bars - Limit switches mounted on all reference stops - Motorised belt kit for chip removal - Automatic tool length measuring device - 100m3/h STD vacuum pump - CE protection with front bumpers and grilles - Euro voltage 400v 50 Hz - Mobile control panel - Multilingual pc - Cnc beckoff - Remote control - Masterwork - Master AT - iso tecnos to iso bechkhoff/osai converter - CAD/CAM MASTER 3D level 2 - Kit options not fitted to the machine - French instruction booklet - Packaging for ground transport Options included : - CAD/CAM ...
Description: ⢠CNC machining centre ⢠Serial number 0-250-06-2992 ⢠Total installed power approx. 18 KW ⢠Useful working area approx. 3250 x 1300 mm ⢠Travelling way X-axis: 3955 mm, Y-axis: 1685 mm, Z-axis: 260 mm ⢠Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min ⢠Tool magazine with 8 positions ⢠ ,Electrospindle: power 9 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled ⢠Saw unit to groove ⢠Vertical drilling spindles in X-axis direction: 10 ⢠Vertical drilling spindles in Y-axis direction: 11 ⢠Horizontal drilling spindles in X-axis direction: 2 + 2 ⢠Horizontal drilling spindles in Y-axis direction: 1 + 1 ⢠NUM numerical control ⢠Software Windows / HOMAG WOODWOP ⢠Remote control panel ⢠6 consoles with 22 vacuum suction cups in total ⢠5 lifting modules for heavy workpieces ⢠BECKER KVT 3.100 ...